€803,41 EUR
+ IVA
Especificaciones técnicas
Protección y seguridad
| Reverse polarity protection | Yes; against destruction |
|---|---|
| short-circuit proof | Yes |
| Isolation tested with | 707 V DC |
| IP degree of protection | IP20 |
Datos eléctricos
| Type of supply voltage | DC |
|---|---|
| Current consumption, typ. | 40 mA |
| Current consumption, max. | 100 mA |
| Current-sinking | Yes |
| Type of output voltage | DC |
| Monitoring the supply voltage | No; Supply voltage diagnostics |
| Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
Condiciones ambientales
| Installation altitude above sea level, max. | 2 000 m |
|---|---|
| Ambient air temperature-barometric pressure-altitude | Tmin ... Tmax at 1 080 hPa ... 795 hPa (-1 000 m ... +2 000 m) |
| Vibration resistance during operation acc. to IEC 60068 | 10 ... 58 Hz / 0.075 mm, 58 ... 150 Hz / 1 g |
Prestaciones y durabilidad
| Mean time between failures (MTBF) | 114.14 a; @ 25 °C |
|---|
Certificados y homologaciones
| Certificate of suitability | CE / RCM / EAC / UL / KC |
|---|
Otras características
| Product type designation | ECC PL ST |
|---|---|
| HW functional status | 1 |
| Firmware version | V1.1.13 |
| FW update possible | Yes |
| usable BaseUnits | BU type B0, B1 |
| Number of channels | 1; Acc. to IEC 61851-1 Mode 4 and DIN SPEC 70121 |
| I&M data | Yes; I&M0 to I&M3 |
| STEP 7 TIA Portal configurable/integrated from version | STEP 7 V16 or higher |
| Mounting type | standard rail |
| Mounting position | Horizontal, vertical |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| Number of digital inputs | 0 |
| shielded, max. | 10 m |
| Type of digital output | Transistor |
| PWM output | Yes; acc. to DIN SPEC 70121 and ISO 15118 |
| Number, max. | 1; 1 per channel |
| Cycle duration, parameterizable | No; 1 kHz |
| Connection of a DC motor | No; Only fixed charging cables are permitted for DC charging systems |
| unshielded, max. | 10 m |
| Number of analog inputs | 1; plug present according to IEC 61851 |
| Number of analog outputs | 1 |
| Type of analog output | Control pilot including Powerline Green Phy, acc. to DIN SPEC 70121 |
| Bus communication | Yes; Backplane bus |
| Vehicle communication according to IEC 61851 | Yes; Mode 4 |
| Diagnostic alarm | Yes |
| Channel status display | Yes; green LED |
| for module diagnostics | Yes; green/red DIAG LED |
| between the channels | No; Only one channel is available |
| between the channels and backplane bus | Yes |
| Degree of pollution | 2 |
| Electrostatic discharge acc. to IEC 61000-4-2 | 4 kV contact discharge / 8 kV air discharge |
| min. | -30 °C |
| max. | 60 °C |
| horizontal installation, min. | -30 °C |
| horizontal installation, max. | 60 °C |
| vertical installation, min. | -30 °C |
| vertical installation, max. | 50 °C |
| Storage, min. | -40 °C |
| Storage, max. | 70 °C |
| Transportation, min. | -40 °C |
| Transportation, max. | 70 °C |
| Operation, min. | 5% |
| Operation, max. | 95 %; no condensation |
| Shock resistance acc. to IEC 60068-2-27 | 15 g / 11 ms |
| to SIMATIC S7-1500 | Yes |
| Width | 20 mm |
| Height | 73 mm |
| Depth | 58 mm |
| Weight, approx. | 51 g |
| Note: | The Tone Mask of the Green Phy defined in DIN 70121 for North America |
| last modified: | 1/9/2025 |
Accesorios
-