SIMATIC ET 200SP TM ECC PL ST
Siemens

SIMATIC ET 200SP TM ECC PL ST

SIMATIC ET 200SP TM ECC PL ST controlador de carga para la carga conductiva de vehículos eléctricos según DIN SPEC 70121 / ISO15118 modo de operación de carga 4 CCS Combined Charging temp.: -30 °C...60 °C 1 piloto de control incluido Powerline Green Phy 1 piloto conector presente/proximidad 1 salida digital con función de disparo como colector abierto 1 salida digital (DQ P) como colector abierto apto para tipo de BU BU20-P12+A0+4B o tipo de BU BU20-P12+A4+0B

Condiciones ambientales
Installation altitude above sea level, max.2 000 m
Ambient air temperature-barometric pressure-altitudeTmin ... Tmax at 1 080 hPa ... 795 hPa (-1 000 m ... +2 000 m)
Prestaciones y durabilidad
Mean time between failures (MTBF)114.14 a; @ 25 °C
Otras características
Product type designationECC PL ST
HW functional status1
Firmware versionV1.1.13
FW update possibleYes
usable BaseUnitsBU type B0, B1
Number of channels1; Acc. to IEC 61851-1 Mode 4 and DIN SPEC 70121
I&M dataYes; I&M0 to I&M3
STEP 7 TIA Portal configurable/integrated from versionSTEP 7 V16 or higher
Mounting typestandard rail
Mounting positionHorizontal, vertical
Type of supply voltageDC
Rated value (DC)24 V
permissible range, lower limit (DC)19.2 V
permissible range, upper limit (DC)28.8 V
Reverse polarity protectionYes; against destruction
Current consumption, typ.40 mA
Current consumption, max.100 mA
Number of digital inputs0
shielded, max.10 m
Type of digital outputTransistor
Current-sinkingYes
short-circuit proofYes
PWM outputYes; acc. to DIN SPEC 70121 and ISO 15118
Number, max.1; 1 per channel
Cycle duration, parameterizableNo; 1 kHz
Connection of a DC motorNo; Only fixed charging cables are permitted for DC charging systems
with resistive load, max.0.6 A; Per digital output
Type of output voltageDC
unshielded, max.10 m
Number of analog inputs1; plug present according to IEC 61851
Number of analog outputs1
Type of analog outputControl pilot including Powerline Green Phy, acc. to DIN SPEC 70121
Bus communicationYes; Backplane bus
Vehicle communication according to IEC 61851Yes; Mode 4
Diagnostic alarmYes
Monitoring the supply voltageNo; Supply voltage diagnostics
Monitoring of the supply voltage (PWR-LED)Yes; green PWR LED
Channel status displayYes; green LED
for module diagnosticsYes; green/red DIAG LED
between the channelsNo; Only one channel is available
between the channels and backplane busYes
Isolation tested with707 V DC
Degree of pollution2
Electrostatic discharge acc. to IEC 61000-4-24 kV contact discharge / 8 kV air discharge
IP degree of protectionIP20
Certificate of suitabilityCE / RCM / EAC / UL / KC
min.-30 °C
max.60 °C
horizontal installation, min.-30 °C
horizontal installation, max.60 °C
vertical installation, min.-30 °C
vertical installation, max.50 °C
Storage, min.-40 °C
Storage, max.70 °C
Transportation, min.-40 °C
Transportation, max.70 °C
Operation, min.5%
Operation, max.95 %; no condensation
Vibration resistance during operation acc. to IEC 6006810 ... 58 Hz / 0.075 mm, 58 ... 150 Hz / 1 g
Shock resistance acc. to IEC 60068-2-2715 g / 11 ms
to SIMATIC S7-1500Yes
Width20 mm
Height73 mm
Depth58 mm
Weight, approx.51 g
Note:The Tone Mask of the Green Phy defined in DIN 70121 for North America
IDEA4
UNSPSC15
last modified:1/9/2025
⬇ Descargar datasheet (PDF)

Ficha técnica oficial del fabricante con todas las especificaciones.

Devolución limitada, consultar condiciones
SIMATIC ET 200SP TM ECC PL ST
SIMATIC ET 200SP TM ECC PL ST
€803,41 EUR
€892,68 EUR
6FE1242-6TM20-0BB1
Plazo de entrega (días):
€803,41 EUR /cada
Total:
Envío 24/48 h Material en stock Garantía y RMA Gestión de devoluciones Asesoramiento técnico Abre un ticket de soporte Distribuidor oficial Marcas líderes del sector

Accesorios