ET 200SP, IM155-6MF
Siemens

ET 200SP, IM155-6MF

SIMATIC ET 200SP módulo de interfaz MultiFieldbus IM 155-6 MF high feature, PN IO, Ethernet IP, Modbus TCP, máx. 64 módulos de periferia y 16 módulos ET 200AL, redundancia S2, Multi Hot Swapping, 0,25 ms, modo isócrono, alivio de tracción PN opcional, PN Security Class 1 incl. módulo de servidor (6ES7193-6PA00-0AA0)

🔌 ComunicaciónGSDML V2.45
Entradas/Salidas y comunicación
PROFINET from GSD version/GSD revisionGSDML V2.45
Number of PROFINET interfaces1; 2 ports (switch)
RJ 45 (Ethernet)Yes; with BusAdapter
BusAdapter (PROFINET)Yes; BA 2x RJ45, BA 2x M12, BA 2x FC
PROFINET IO deviceYes
Supports protocol for PROFINET IOYes
PROFIsafeYes
EtherNet/IPYes
Modbus TCPYes
PROFINET system redundancy (S2)Yes; NAP S2
between PROFINET and all other circuitsYes; 1500 V AC (type test)
PROFINET Security Class1
Otras características
Product type designationIM 155-6 MF HF
Firmware versionV6.4.1
FW update possibleYes
Vendor identification (VendorID)002AH
Device identifier (DeviceID)0313H
Device ID according to ODVA (Product code)0FA2H
I&M dataYes; I&M0 to I&M4
Module swapping during operation (hot swapping)Yes; Multi-hot swapping
Isochronous modeYes
IRTYes
Tool changerYes; Docking station and docking unit
Local coupling, IO dataYes
Number of coupling modules6; 1x output + max. 5x input
STEP 7 TIA Portal configurable/integrated from versionV20
STEP 7 configurable/integrated from versionV5.7 SP3
Multi Fieldbus Configuration Tool (MFCT)V1.5.2.0 or higher
via datasetYes
Rated value (DC)24 V
permissible range, lower limit (DC)19.2 V
permissible range, upper limit (DC)28.8 V
Reverse polarity protectionYes
Short-circuit protectionYes
Mains/voltage failure stored energy time10 ms
Current consumption (rated value)550 mA
Current consumption, max.650 mA
Inrush current, max.1A
I²t0.05 A²·s
Power loss, typ.2W
Address space per module, max.288 byte; For input and output data respectively
Address space per station, max.1 440 byte
Quantity of operable ET 200SP modules, max.64
Quantity of operable ET 200AL modules, max.16
Number of submodules per station, max.256
Transmission procedure100BASE-TX
Number of ports2; with BusAdapter
integrated switchYes
Open IE communicationYes
Media redundancyYes; PROFINET MRP client
Dynamic Frame Packing (DFP)Yes
Fast ForwardingYes
FragmentationYes
PROFIenergyYes
Prioritized startupYes
Shared deviceYes
Number of IO Controllers with shared device, max.14; 2x PN controller + 2x EtherNet/IP scanner + 10x Modbus TCP master
100 MbpsYes
AutonegotiationYes
AutocrossingYes
Number of MtM communication16
H-Sync forwardingYes
MRPYes
MRPDYes
CIP Implicit MessagingYes
CIP Explicit MessagingYes
Number of scanners with shared device, max.2
Requested Packet Interval (RPI)2 ms
ForwardOpen (Class1 & 32 bit Header)500 byte; (246 byte outputs / 500 byte inputs)
LargeForwardOpen (Class3)4 002 byte
Number of rack connections2
read coils (code=1)Yes
read discrete inputs (code=2)Yes
Read Holding Registers (Code=3)Yes
Read Input Register (Code=4)Yes
write single coil (code=5)Yes
Write Single Register (Code=6)Yes
write multiple coils (code=15)Yes
Write Multiple Registers (Code=16)Yes
Read/Write Multiple Registers (Code=23)Yes
Parameter change by masterYes
Access-consistent address space250 byte; (246 byte outputs / 250 byte inputs)
I/O request interval2 ms
number of connections per device9; (1x inputs / 2x outputs / 4x volatile registers / 2x Device Info)
TCP/IPYes
UDPYes
SNMPYes
LLDPYes
ARPYes
IGMPYes
MulticastYes
BroadcastYes
IPv4Yes
EquidistanceYes
shortest clock pulse250 µs
max. cycle4 ms
Bus cycle time (TDP), min.250 µs
Jitter, max.1 µs
Status indicatorYes
AlarmsYes
Diagnostics functionYes
RUN LEDYes; green LED
ERROR LEDYes; red LED
MAINT LEDYes; Yellow LED
Monitoring of the supply voltage (PWR-LED)Yes; green PWR LED
NS LEDYes; green/red LED
MS LEDYes; green/red LED
IO LEDYes; red-green-yellow LED
Connection display LINK TX/RXYes; 2x green link LEDs on BusAdapter
between different circuitsSafety extra low voltage SELV
Isolation tested with707 V DC (type test)
Network loading class3
signed firmware updateYes
safely removing dataYes
data integrityYes
horizontal installation, min.-30 °C; No condensation
horizontal installation, max.60 °C
vertical installation, min.-30 °C; No condensation
vertical installation, max.50 °C
via BU/BA SendYes; + 16 ET 200AL modules
Strain reliefYes; Optional
Width50 mm
Height117 mm
Depth74 mm
Weight, approx.120 g; without BusAdapter
CCC-ExNK / Nippon Kaiji Ky-
CCS (China ClassificaKR (Korean Register
tion Society)of Shipping)
last modified:6/18/2026
⬇ Descargar datasheet (PDF)

Ficha técnica oficial del fabricante con todas las especificaciones.

Material con posibilidad de devolución
ET 200SP, IM155-6MF
€374,01 EUR
€440,01 EUR
6ES7155-6MU01-0CN0
Plazo de entrega (días):
€374,01 EUR /cada
Total:

Accesorios