ET 200SP, DI8x+DQ8x 24V DC/0,5A ST, PU1
Siemens

ET 200SP, DI8x+DQ8x 24V DC/0,5A ST, PU1

SIMATIC ET 200SP, módulo mixto digital, DI 8x/DQ 8x24 V DC/0,5 A estándar, DI: entrada Sink, (sumidero), DQ: salida Source (fuente) adecuado para BU tipo A0, código de color CC00, salida de valor sustitutivo para DQ, diagnóstico de módulo para: cortocircuito a L+ y M, rotura de hilo, tensión de alimentación

🔌 ComunicaciónGSDML V2.42
Entradas/Salidas y comunicación
PROFIBUS from GSD version/GSD revisionOne GSD file each, Revision 3 and 5 and higher
PROFINET from GSD version/GSD revisionGSDML V2.42
Montaje y material
Color code for module-specific color-coded labelCC00
Certificados y homologaciones
Type Examination CerCCC-Ex
Otras características
Product type designationDI 8x/DQ 8x24VDC/0,5A ST
HW functional statusFS01
Firmware versionV1.0
FW update possibleYes
usable BaseUnitsBU type A0
I&M dataYes; I&M0 to I&M3
STEP 7 TIA Portal configurable/integrated from versionSTEP 7 V18 or higher with HSP 0401
Rated value (DC)24 V
permissible range, lower limit (DC)19.2 V
permissible range, upper limit (DC)28.8 V
Reverse polarity protectionYes
Current consumption, max.35 mA; without load
Power loss, typ.1W
Inputs1 byte; + 1 byte for QI information
Outputs1 byte
Automatic encodingYes
Mechanical coding elementYes
Type of mechanical coding elementType A
1-wire connectionBU type A0
2-wire connectionBU type A0 with AUX terminals or potential distributor module
3-wire connectionBU type A0 with AUX terminals or potential distributor module
Number of digital inputs8
Digital inputs, parameterizableYes
Sourcing/sinking inputP-reading
for signal "0"-30 to +5 V
for signal "1"+11 to +30V
for signal "1", typ.2.5 mA
parameterizableYes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms
at "0" to "1", min.0.05 ms
at "0" to "1", max.20 ms
at "1" to "0", min.0.05 ms
at "1" to "0", max.20 ms
shielded, max.1 000 m
unshielded, max.600 m
Type of digital outputSource output (PNP, current-sourcing)
Number of digital outputs8
Current-sourcingYes
Digital outputs, parameterizableYes
output type acc. to IEC 61131, type 0.5Yes
Short-circuit protectionYes; Electronic
Response threshold, typ.1A
Limitation of inductive shutdown voltage toTyp. L+ (-50 V)
Controlling a digital inputYes
with resistive load, max.0.5 A
with inductive load, max.0.5 A; max. 1 H inductance
on lamp load, max.5W
lower limit48 Ω
upper limit12 kΩ
for signal "1", min.L+ (-0.8 V)
for signal "1" rated value0.5 A
for signal "1" permissible range, max.0.5 A
for signal "0" residual current, max.0.1 mA
"0" to "1", max.50 µs
"1" to "0", max.100 µs
for redundant control of a loadYes
with inductive load (acc. to IEC 60947-5-1, DC13), max.0.1 Hz; higher frequencies are possible, see Equipment Manual "Maximum
Current per channel, max.0.5 A
Current per module, max.4A
up to 60 °C, max.4A
up to 50 °C, max.4A
2-wire sensorYes
permissible quiescent current (2-wire sensor), max.1.5 mA
Diagnostics functionYes
Substitute values connectableYes
Diagnostic alarmYes
Monitoring the supply voltageYes
Short-circuit to groundYes; module-by-module for DQ
Short-circuit to L+Yes; module-by-module for DQ
Group errorYes
Monitoring of the supply voltage (PWR-LED)Yes; green PWR LED
Channel status displayYes; green LED
for module diagnosticsYes; green/red DIAG LED
between the channels and backplane busYes
Isolation tested with707 V DC (type test)
horizontal installation, min.-30 °C
horizontal installation, max.60 °C
vertical installation, min.-30 °C
vertical installation, max.50 °C
dew point, min.-60 °C; suitable for dry room applications
Width15 mm
Height73 mm
Depth58 mm
Weight, approx.30 g
For use in hazardous locationsMaritime application
tificateokai
CCS (China ClassificaKR (Korean Register
tion Society)of Shipping)
last modified:2/1/2026
⬇ Descargar datasheet (PDF)

Ficha técnica oficial del fabricante con todas las especificaciones.

Material con posibilidad de devolución
ET 200SP, DI8x+DQ8x 24V DC/0,5A ST, PU1
€120,13 EUR
€141,33 EUR
6ES7133-6BH00-0BA0
Plazo de entrega (días):
€120,13 EUR /cada
Total:

Accesorios