SIPLUS ET 200SP F-DI 4/8X24VDC RAIL
Siemens

SIPLUS ET 200SP F-DI 4/8X24VDC RAIL

SIPLUS ET 200SP F-DI 4/8 × 24 V DC RAIL basado en 6ES7136-6BA01-0CA0 con revestimiento conformado, –40…+60 °C, OT2 con ST1/2 (+70 °C durante 10 min), entradas digitales de seguridad hasta PL e (ISO 13849-1), SIL3 (IEC 61508)

Protección y seguridad
Reverse polarity protectionYes
Short-circuit protectionYes; Electronic (response threshold 0.7 A to 1.8 A)
Isolation tested with750 V DC (type test) and according to EN 50155 (routine test)
Performance level according to ISO 13849-1PLe
Category according to ISO 13849-1Cat. 4
SIL acc. to IEC 61508SIL 3
Fire protection acc. to EN 45545-2Yes; For proof of conformity, see Service & Support
Protection against fouling acc. to EN 60664-3Yes; Type 1 protection
Datos eléctricos
Current consumption, max.40 mA; without load
Output current per channel, max.300 mA
Output current per module, max.800 mA; Total current of all encoders
Power loss, typ.2W
Monitoring of the supply voltage (PWR-LED)Yes; green PWR LED
Montaje y material
Color code for module-specific color-coded labelCC01
Condiciones ambientales
Installation altitude above sea level, max.2 000 m
Ambient air temperature-barometric pressure-altitudeTmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m)
Otras características
Product type designationF-DI 8x24VDC HF
FW update possibleYes
based on6ES7136-6BA01-0CA0
usable BaseUnitsBU type A0
I&M dataYes; I&M0 to I&M3
STEP 7 TIA Portal configurable/integrated from versionsee entry ID: 109746275
Rated value (DC)24 V
permissible range, lower limit (DC)19.2 V
permissible range, upper limit (DC)28.8 V
Number of outputs8
up to 60 °C, max.0.3 A
24 VYes; min. L+ (-1.5 V)
Inputs7 byte; S7-300/400F CPU, 6 byte
Outputs5 byte; S7-300/400F CPU, 4 byte
Automatic encodingYes
Electronic coding element type FYes
Number of digital inputs8
Digital inputs, parameterizableYes
Sourcing/sinking inputYes; P-reading
for signal "0"-30 to +5 V
for signal "1"+15 to +30 V
for signal "1", typ.3.7 mA
parameterizableYes
shielded, max.1 000 m
unshielded, max.500 m
Diagnostics functionYes; See Chapter "Alarms/diagnostic messages" in the manual
Diagnostic alarmYes
RUN LEDYes; green LED
ERROR LEDYes; red LED
Channel status displayYes; green LED
for channel diagnosticsYes; red LED
for module diagnosticsYes; green/red DIAG LED
between the channels and backplane busYes
Suitable for safety functionsYes
50716specific application under consideration of all local regulations.
Low demand mode: PFDavg in accordance with< 2.00E-05
High demand/continuous mode: PFH in accordance< 1.00E-09 1/h
EN 50121-3-2Yes; EMC for rail vehicles
EN 50121-4Yes; EMC for signal and telecommunications systems
EN 50125-1Yes; Rail vehicles - see ambient conditions
EN 50125-2Yes; Stationary electrical equipment - see ambient conditions
EN 50125-3Yes; Signal and telecommunications systems - see ambient conditions;
EN 61373Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B
horizontal installation, min.-40 °C; = Tmin (incl. condensation/frost)
vertical installation, min.-40 °C; = Tmin
vertical installation, max.50 °C; = Tmax
2-38, max.horizontal installation
Resistant to commercially available coolants andYes; Incl. diesel and oil droplets in the air
60721-3-3Class 3B3 on request
to EN 60721-3-30AA0)
60721-3-5Class 5B3 on request
to EN 60721-3-50AA0)
agriculture acc. to ISO 15003(6AG1193-6AA00-0AA0)
conditions acc. to EN 60721, EN 60654-4 andduring operation!
Electronic equipment on rolling stock acc. to EN 50155Yes; Class PC2 protective coating acc. to EN 50155:2017
Military testing according to MIL-I-46058C, Amendment 7Yes; Discoloration of coating possible during service life
Qualification and Performance of Electrical InsulatingYes; Conformal coating, Class A
Width15 mm
Height73 mm
Depth58 mm
Weight, approx.29 g
EMVFunctional Saftey
RailwayEnvironment
TUEVTUEV
last modified:10/23/2025

Ficha técnica oficial del fabricante con todas las especificaciones.

Producto bajo pedido

Puedes pedirlo ya: te lo servimos en el plazo indicado. Selecciona la cantidad para añadirlo al carrito.

Plazo de entrega (días):
Avísame cuando haya stock

Si prefieres esperar a que vuelva a haber envío inmediato, déjanos tu email.

Solo usaremos tu email para avisarte de este artículo.

Avísame cuando esté disponible

SIPLUS ET 200SP F-DI 4/8X24VDC RAIL
€760,67 EUR
€845,19 EUR
6AG2136-6BA01-2CA0
Plazo de entrega (días):
€760,67 EUR /cada
Total:

Accesorios