SIPLUS ET 200SP IM155-6DP HF

DescripciónEspecificacionesDescargasStock

SIPLUS ET 200SP IM155-6DP HF basado en 6ES7155-6BA01-0CN0 con revestimiento conformado, –40…+70 °C, bundle PROFIBUS IM, máx. 32 módulos de periferia y 16 módulos ET 200AL, Multi Hot Swapping, bundle compuesto por: módulo de interfaz (6AG1155-6BU01-7CN0), módulo de servidor (6AG1193-6PA00-7AA0), conector PROFIBUS

Comunicación1

Protección y seguridad

Reverse polarity protection	Yes
Isolation tested with	707 V DC (type test)
Protection against fouling acc. to EN 60664-3	Yes; Type 1 protection

Datos eléctricos

Mains/voltage failure stored energy time	10 ms
Current consumption, max.	335 mA
Inrush current, max.	1.6 A
Power loss, typ.	1.5 W
Output current of the interface, max.	90 mA
Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED

Entradas/Salidas y comunicación

Number of PROFIBUS interfaces	1
PROFIBUS DP device	Yes
PROFIsafe	Yes
PROFIBUS	Yes
between PROFIBUS DP and all other circuit components	Yes

Condiciones ambientales

Installation altitude above sea level, max.	5 000 m

Otras características

Product type designation	IM 155-6 DP HF
FW update possible	Yes
based on	6ES7155-6BA01-0CN0
I&M data	Yes; I&M0 to I&M3
Module swapping during operation (hot swapping)	Yes; Multi-hot swapping
STEP 7 TIA Portal configurable/integrated from version	see entry ID: 109746275
via dataset	Yes
Rated value (DC)	24 V
permissible range, lower limit (DC)	19.2 V
permissible range, upper limit (DC)	28.8 V
I²t	0.038 A²·s
Address space per module, max.	32 byte; per input / output
Address space per station, max.	244 byte; per input / output
Quantity of operable ET 200SP modules, max.	32
Quantity of operable ET 200AL modules, max.	16
RS 485	Yes; 1 integrated RS 485 socket
Transmission rate, max.	12 Mbit/s
SYNC capability	Yes
FREEZE capability	Yes
DPV0	Yes
DPV1	Yes
Status indicator	Yes
Alarms	Yes
Diagnostics function	Yes
RUN LED	Yes; green LED
ERROR LED	Yes; red LED
MAINT LED	Yes; Yellow LED
Connection display DP	Yes; green DP LED
between different circuits	Safety extra low voltage SELV
horizontal installation, min.	-40 °C; = Tmin (incl. condensation/frost)
horizontal installation, max.	70 °C; = Tmax
vertical installation, min.	-40 °C; = Tmin (incl. condensation/frost)
vertical installation, max.	50 °C; = Tmax
2-38, max.	horizontal installation
Resistant to commercially available coolants and	Yes; Incl. diesel and oil droplets in the air
60721-3-3	Class 3B3 on request
to EN 60721-3-3	0AA0)
60721-3-6	degree 3); *
to EN 60721-3-6	0AA0)
conditions acc. to EN 60721, EN 60654-4 and	during operation!
Military testing according to MIL-I-46058C, Amendment 7	Yes; Discoloration of coating possible during service life
Qualification and Performance of Electrical Insulating	Yes; Conformal coating, Class A
via BU/BA Send	Yes; + 16 ET 200AL modules
Width	50 mm
Height	117 mm
Depth	74 mm
Weight, approx.	150 g
last modified:	10/23/2025

Ficha técnica oficial del fabricante con todas las especificaciones.

Producto bajo pedido

Puedes pedirlo ya: te lo servimos en el plazo indicado. Selecciona la cantidad para añadirlo al carrito.

Plazo de entrega (días):

Avísame cuando haya stock

Si prefieres esperar a que vuelva a haber envío inmediato, déjanos tu email.

Solo usaremos tu email para avisarte de este artículo.

SIPLUS ET 200SP IM155-6DP HF

Ahorra 10%

6AG1155-6BA01-7CN0

€843,65 EUR

~~€937,39 EUR~~

6AG1155-6BA01-7CN0

Plazo de entrega (días):

€843,65 EUR /cada

Plazo de entrega (días):

€843,65 EUR /cada

Total:

Total: €0,00 EUR

en el carrito Total: