ET 200SP, TM Timer DIDQ 10x24V

DescripciónEspecificacionesDescargasStock

SIMATIC ET 200SP, TM Timer DI DQ 10x 24V entradas y salidas digitales controladas por tiempo 4DI, 6DQ con etiqueta de tiempo contar, PWM, oversampling

Nº de interfaces PROFINET0

Protección y seguridad

Reverse polarity protection	Yes; against destruction
Short-circuit protection	Yes
short-circuit	Yes
Isolation tested with	707 V DC (type test)

Datos eléctricos

Current consumption, max.	50 mA; without load
Output current, max.	500 mA; Observe derating
Power loss, typ.	1.5 W
Type of input voltage	DC
permissible voltage at input, min.	-30 V; -5 V continuous, -30 V brief reverse polarity protection
permissible voltage at input, max.	30 V
Current-sinking	Yes; With High Speed output
Current-sourcing	Yes
Limitation of inductive shutdown voltage to	-0.8 V
Type of output voltage	DC
for signal "1" minimum load current	2 mA
for signal "0" residual current, max.	0.5 mA
Current per module, max.	3.5 A; Observe derating
permissible quiescent current (2-wire sensor), max.	1.5 mA
Input voltage	24 V
Monitoring the supply voltage	Yes
Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED

Entradas/Salidas y comunicación

Number of RS 485 interfaces	0

Certificados y homologaciones

China RoHS	FM

Otras características

Product type designation	TM Timer DIDQ 10x24V
HW functional status	From FS03
usable BaseUnits	BU type A0
I&M data	Yes; I&M 0
Isochronous mode	Yes
STEP 7 TIA Portal configurable/integrated from version	V13 Update 3
STEP 7 configurable/integrated from version	V5.5 SP3 / -
Rated value (DC)	24 V
permissible range, lower limit (DC)	19.2 V
permissible range, upper limit (DC)	28.8 V
Number of outputs	1
24 V	Yes; L+ (-0.8 V)
Inputs	26 byte
Outputs	32 byte
Automatic encoding	Yes
Mechanical coding element	Yes
Type of mechanical coding element	type B
Number of digital inputs	4
Digital inputs, parameterizable	Yes
Digital input with time stamp	Yes
Number, max.	4
Counter	Yes
Counter for incremental encoder	Yes
Digital input with oversampling	Yes
HW enable for digital input	Yes
HW enable for digital output	Yes
for signal "0"	-5 ... +5 V
for signal "1"	+11 to +30V
for signal "1", typ.	2.5 mA
Minimum pulse width for program reactions	3 µs; for parameterization "none"
parameterizable	Yes; none / 0.05 / 0.1 / 0.4 / 0.8 ms
shielded, max.	1 000 m; Depending on sensor, cable quality and rate of change
unshielded, max.	600 m; Depending on sensor, cable quality and rate of change
Type of digital output	Transistor
Number of digital outputs	6
Digital outputs, parameterizable	Yes
Response threshold, typ.	1.7 A with Standard output, 0.5 A with High Speed output
Digital output with time stamp	Yes
PWM output	Yes
Digital output with oversampling	Yes
lower limit	48 Ω; 240 ohm with High Speed output
upper limit	12 kΩ
for signal "0", max.	1 V; With High Speed output
for signal "1", min.	23.2 V; L+ (-0.8 V)
for signal "1" rated value	0.5 A; 0.1 A with High Speed output, observe derating
for signal "1" permissible range, max.	0.6 A; 0.12 A with High Speed output, observe derating
"0" to "1", max.	1 µs; With High Speed output, 5 µs with Standard output
"1" to "0", max.	1 µs; With High Speed output, 6 µs with Standard output
Incremental encoder (asymmetrical)	Yes
24 V initiator	Yes
2-wire sensor	Yes
Input frequency, max.	50 kHz
Counting frequency, max.	200 kHz; with quadruple evaluation
Incremental encoder with A/B tracks, 90° phase offset	Yes
pulse encoder	Yes
Bus cycle time (TDP), min.	375 µs
Jitter, max.	1 µs
Diagnostics function	Yes
Substitute values connectable	Yes
Diagnostic alarm	Yes
Channel status display	Yes
for module diagnostics	Yes; green/red DIAG LED
Number of counters	3
Continuous counting	Yes
between the channels and backplane bus	Yes
horizontal installation, min.	-30 °C
horizontal installation, max.	60 °C; Observe derating
vertical installation, min.	-30 °C
vertical installation, max.	50 °C; Observe derating
dew point, min.	-60 °C; suitable for dry room applications
to SIMATIC S7-1500	Yes
Width	15 mm
Height	73 mm
Depth	58 mm
Weight, approx.	45 g
CCC-Ex	Type Examination Cer-
CCS (China Classifica	KR (Korean Register
tion Society)	of Shipping)
last modified:	7/3/2026

Ficha técnica oficial del fabricante con todas las especificaciones.

Producto bajo pedido

Puedes pedirlo ya: te lo servimos en el plazo indicado. Selecciona la cantidad para añadirlo al carrito.

Plazo de entrega (días):

Avísame cuando haya stock

Si prefieres esperar a que vuelva a haber envío inmediato, déjanos tu email.

Solo usaremos tu email para avisarte de este artículo.

ET 200SP, TM Timer DIDQ 10x24V

Ahorra 2%

6ES7138-6CG00-0BA0

€431,21 EUR

~~€440,01 EUR~~

6ES7138-6CG00-0BA0

Plazo de entrega (días):

€431,21 EUR /cada

Plazo de entrega (días):

€431,21 EUR /cada

Total:

Total: €0,00 EUR

en el carrito Total: