Arrancador suave SIRIUS, 25A, resorte
Certificados y homologaciones
CECSA
Siemens

Arrancador suave SIRIUS, 25A, resorte

Arrancadores suaves SIRIUS 200-600 V 25 A, 110-250 V AC bornes de resorte salida analógica

  • Comunicación3RW5980-0CS00
Entradas/Salidas y comunicación
of communication module PROFINET standard usable3RW5980-0CS00
of communication module PROFIBUS usable3RW5980-0CP00
of communication module Modbus TCP usable3RW5980-0CT00
of communication module Modbus RTU usable3RW5980-0CR00
of communication module Ethernet/IP3RW5980-0CE00
PROFINET standardYes
EtherNet/IPYes
Modbus RTUYes
Modbus TCPYes
PROFIBUSYes
Conexión y cableado
removable terminal for control circuitYes
for AWG cables for main current circuit solid2x (16 ... 12), 2x (14 ... 8)
for AWG cables for control circuit solid2x (24 ... 16)
for AWG cables for control circuit finely stranded with2x (24 ... 16)
for main contacts with screw-type terminals2 ... 2.5 N·m
Condiciones ambientales
installation altitude at height above sea level maximum5 000 m
Otras características
product brand nameSIRIUS
product categoryHybrid switching devices
product type designation3RW52
of standard HMI module usable3RW5980-0HS00
of high feature HMI module usable3RW5980-0HF00
of circuit breaker usable at 400 V3RV2032-4EA10; Type of coordination 1, Iq = 65 kA, CLASS 10
of circuit breaker usable at 500 V3RV2032-4EA10; Type of coordination 1, Iq = 15 kA, CLASS 10
of the gG fuse usable up to 690 V3NA3822-6; Type of coordination 1, Iq = 65 kA
of full range R fuse link for semiconductor protection3NE1817-0; Type of coordination 2, Iq = 65 kA
of back-up R fuse link for semiconductor protection3NE8021-1; Type of coordination 2, Iq = 65 kA
starting voltage [%]30 ... 100 %
stopping voltage [%]50 %; non-adjustable
start-up ramp time of soft starter0 ... 20 s
current limiting value [%] adjustable130 ... 700 %
CE markingYes
UL approvalYes
CSA approvalYes
is supported HMI-StandardYes
is supported HMI-High FeatureYes
product feature integrated bypass contact systemYes
number of controlled phases3
for main current circuit100 ms
for control circuit100 ms
insulation voltage rated value600 V
degree of pollution3, acc. to IEC 60947-4-2
impulse voltage rated value6 kV
blocking voltage of the thyristor maximum1 600 V
service factor1
surge voltage resistance rated value6 kV
between main and auxiliary circuit600 V
shock resistance15 g / 11 ms, from 12 g / 11 ms with potential contact lifting
vibration resistance15 mm to 6 Hz; 2 g to 500 Hz
utilization category according to IEC 60947-4-2AC 53a
Net Weight2.93 kg
ramp-up (soft starting)Yes
soft stoppingYes
Soft TorqueYes
adjustable current limitationYes
pump stopYes
intrinsic device protectionYes
motor overload protectionYes; Electronic motor overload protection
inside-delta circuitYes
auto-RESETYes
manual RESETYes
remote resetYes; By turning off the control supply voltage
communication functionYes
operating measured value displayYes; Only in conjunction with special accessories
error logbookYes; Only in conjunction with special accessories
via software configurableYes
PROFIenergyYes; in connection with the PROFINET Standard communication module
firmware updateYes
at 40 °C rated value25 A
at 50 °C rated value22.3 A
at 60 °C rated value19.6 A
rated value200 ... 600 V
at inside-delta circuit rated value200 ... 600 V
relative negative tolerance of the operating voltage-15 %
relative positive tolerance of the operating voltage10 %
relative negative tolerance of the operating voltage at-15 %
relative positive tolerance of the operating voltage at10 %
at 230 V at 40 °C rated value5.5 kW
at 230 V at inside-delta circuit at 40 °C rated value11 kW
at 400 V at 40 °C rated value11 kW
at 400 V at inside-delta circuit at 40 °C rated value18.5 kW
at 500 V at 40 °C rated value15 kW
at 500 V at inside-delta circuit at 40 °C rated value22 kW
Operating frequency 1 rated value50 Hz
Operating frequency 2 rated value60 Hz
relative negative tolerance of the operating frequency-10 %
relative positive tolerance of the operating frequency10 %
at rotary coding switch on switch position 111.5 A
at rotary coding switch on switch position 212.4 A
at rotary coding switch on switch position 313.3 A
at rotary coding switch on switch position 414.2 A
at rotary coding switch on switch position 515.1 A
at rotary coding switch on switch position 616 A
at rotary coding switch on switch position 716.9 A
at rotary coding switch on switch position 817.8 A
at rotary coding switch on switch position 918.7 A
at rotary coding switch on switch position 1019.6 A
at rotary coding switch on switch position 1120.5 A
at rotary coding switch on switch position 1221.4 A
at rotary coding switch on switch position 1322.3 A
at rotary coding switch on switch position 1423.2 A
at rotary coding switch on switch position 1524.1 A
at rotary coding switch on switch position 1625 A
minimum11.5 A
at inside-delta circuit minimum19.9 A
minimum load [%]15 %; Relative to smallest settable Ie
at 40 °C after startup20 W
at 50 °C after startup19 W
at 60 °C after startup18 W
at 40 °C during startup376 W
at 50 °C during startup318 W
at 60 °C during startup278 W
type of voltage of the control supply voltageAC
at 50 Hz110 ... 250 V
at 60 Hz110 ... 250 V
control supply voltage frequency50 ... 60 Hz
control supply current in standby mode rated value30 mA
holding current in bypass operation rated value75 mA
inrush current by closing the bypass contacts maximum0.17 A
design of the overvoltage protectionVaristor
number of digital inputs1
number of digital outputs3
not parameterizable2
digital output version2 normally-open contacts (NO) / 1 changeover contact (CO)
number of analog outputs1
at AC-15 at 250 V rated value3A
at DC-13 at 24 V rated value1A
fastening methodscrew fixing
height275 mm
width170 mm
depth152 mm
forwards10 mm
backwards0 mm
upwards100 mm
downwards75 mm
at the side5 mm
solid2x (1.0 ... 2.5 mm²), 2x (2.5 ... 10 mm²)
finely stranded with core end processing2x (1.0 ... 2.5 mm²), 2x (2.5 ... 6.0 mm²)
for control circuit solid2x (0.25 ... 1.5 mm²)
between soft starter and motor maximum800 m
at the digital inputs at AC maximum100 m
for auxiliary and control contacts with screw-type0.8 ... 1.2 N·m
during storage and transport-40 ... +80 °C
during transport according to IEC 607212K2, 2C1, 2S1, 2M2 (max. fall height 0.3 m)
EMC emitted interferenceacc. to IEC 60947-4-2: Class A
usable for Standard Faults up to 575/600 VType: Class RK5 / K5, max. 100 A; Iq = 5 kA
usable for High Faults up to 575/600 V according toType: Class J / L, max. 100 A; Iq = 100 kA
usable for Standard Faults at inside-delta circuit upType: Class RK5 / K5, max. 100 A; Iq = 5 kA
usable for High Faults at inside-delta circuit up toType: Class J / L, max. 100 A; Iq = 100 kA
at 200/208 V at 50 °C rated value5 hp
at 220/230 V at 50 °C rated value7.5 hp
at 460/480 V at 50 °C rated value15 hp
at 575/600 V at 50 °C rated value20 hp
contact rating of auxiliary contacts according to ULR300-B300
protection class IP on the front according to IEC 60529IP20
touch protection on the front according to IEC 60529finger-safe, for vertical contact from the front
1/L13/L2
5/L3A1
ON/RUNBYPASSED
13 NO23 NO
98 NO96 NC
last modified:4/4/2026

Ficha técnica oficial del fabricante con todas las especificaciones.

Ficha técnica PDF
Producto bajo pedido

Puedes pedirlo ya: te lo servimos en el plazo indicado. Selecciona la cantidad para añadirlo al carrito. Si prefieres esperar a que vuelva a haber stock inmediato, déjanos tu email abajo.

Plazo de entrega (días):

Este artículo va bajo pedido.

Avísame cuando esté disponible

Solo usaremos tu email para avisarte de este artículo.
Arrancador suave SIRIUS, 25A, resorte
Arrancador suave SIRIUS, 25A, resorte
€891,66 EUR
€1.371,79 EUR
3RW5215-3AC15
Plazo de entrega (días):
€891,66 EUR /cada
Total:
Envío 24/48 h Material en stock Garantía y RMA Gestión de devoluciones Asesoramiento técnico Abre un ticket de soporte Distribuidor oficial Marcas líderes del sector

Accesorios