ET 200SP, CM 4 X IO-Link ST

DescripciónEspecificacionesDescargasGarantías

SIMATIC ET 200SP, CM 4 x IO-Link ST módulo de comunicación Maestro IO-Link V1.1

🔌 Comunicación	Yes

Entradas/Salidas y comunicación

PROFIBUS from GSD version/GSD revision	One GSD file each, Revision 3 and 5 and higher
PROFINET from GSD version/GSD revision	GSDML V2.3
IO-Link	Yes
IO-Link protocol 1.0	Yes
IO-Link protocol 1.1	Yes

Conexión y cableado

Cable length unshielded, max.	20 m

Montaje y material

Color code for module-specific color-coded label	CC04

Condiciones ambientales

Installation altitude above sea level, max.	2 000 m; On request: Installation altitudes greater than 2 000 m

Certificados y homologaciones

Type Examination Cer	Miscellaneous

Otras características

Product type designation	CM 4 x IO-Link ST
HW functional status	FS20
Firmware version	V2.2.2
FW update possible	Yes
usable BaseUnits	BU type A0
I&M data	Yes; I&M0 to I&M3
STEP 7 TIA Portal configurable/integrated from version	STEP 7 V15 or higher
STEP 7 configurable/integrated from version	STEP 7 V5.5 or higher
Rated value (DC)	24 V
permissible range, lower limit (DC)	20.4 V
permissible range, upper limit (DC)	28.8 V
Current consumption, max.	45 mA; without load
Number of outputs	4
Rated value	700 mA; Per channel
Short-circuit protection	Yes
Output current, max.	2.1 A
Power loss, typ.	1W
Automatic encoding	Yes
Electronic coding element type H	Yes
unshielded, max.	20 m; Also applies for shielded cables
Number of ports	4
of which simultaneously controllable	4
Transmission rate	4.8 kBaud (COM1); 38.4 kBaud (COM2), 230.4 kBaud (COM3)
Cycle time, min.	2 ms; dynamic, depending on user data length
Size of process data, input per port	32 byte; max.
Size of process data, input per module	144 byte; max.
Size of process data, output per port	32 byte; max.
Size of process data, output per module	128 byte; max.
Memory size for device parameter	2 kbyte; for each port
Master backup	Yes
Configuration without S7-PCT	Yes
Port type A	Yes
Port type B	Yes; 24 V DC via external terminal
via three-wire connection	Yes
Diagnostic alarm	Yes; The port diagnosis is available in the IO-Link mode only.
Monitoring the supply voltage	Yes
Wire break	Yes
Short-circuit	Yes
Group error	Yes
Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED
for channel diagnostics	Yes; red Fn LED
for module diagnostics	Yes; green/red DIAG LED
between the channels and backplane bus	Yes
Isolation tested with	707 V DC (type test)
horizontal installation, min.	-30 °C
horizontal installation, max.	60 °C
vertical installation, min.	-30 °C
vertical installation, max.	50 °C
Width	15 mm
Height	73 mm
Depth	58 mm
Weight, approx.	30 g
IDEA	4
UNSPSC	15
For use in hazardous locations	Maritime application
NK / Nippon Kaiji Ky	CCS (China Classifica-
okai	tion Society)
last modified:	4/13/2026

⬇ Descargar datasheet (PDF)

Ficha técnica oficial del fabricante con todas las especificaciones.

Material con posibilidad de devolución

ET 200SP, CM 4 X IO-Link ST

Descuento 15%

6ES7137-6BD00-0BA0

€293,51 EUR

~~€345,31 EUR~~

6ES7137-6BD00-0BA0

Plazo de entrega (días):

€293,51 EUR /cada

Plazo de entrega (días):

€293,51 EUR /cada

Total:

Total: €0,00 EUR

en el carrito Total: