ET 200SP, DI 16x 24V DC ST, emb. 10
Siemens

ET 200SP, DI 16x 24V DC ST, emb. 10

SIMATIC ET 200SP, módulo de entradas digitales, DI 16x 24V DC Standard, tipo de entrada 3 (CEI 61131), Sink Input, (PNP, tipo p), embalaje 10 piezas, apto para tipo de UB A0, código de color CC00, retardo de entrada 0,05..20ms, diagnóstico de módulo para: rotura hilo, tensión de alimentación

🔌 ComunicaciónGSDML V2.3
Entradas/Salidas y comunicación
PROFIBUS from GSD version/GSD revisionOne GSD file each, Revision 3 and 5 and higher
PROFINET from GSD version/GSD revisionGSDML V2.3
Montaje y material
Color code for module-specific color-coded labelCC00
Condiciones ambientales
Installation altitude above sea level, max.5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Otras características
Product type designationDI 16x24VDC ST
HW functional statusFrom FS02
Firmware versionV0.0
usable BaseUnitsBU type A0
I&M dataYes; I&M0 to I&M3
STEP 7 TIA Portal configurable/integrated from versionV14
STEP 7 configurable/integrated from versionV5.5 SP3
PCS 7 configurable/integrated from versionV8.1 SP1
PCS neo can be configured/integrated from versionfrom V1.0.0
Rated value (DC)24 V
permissible range, lower limit (DC)19.2 V
permissible range, upper limit (DC)28.8 V
Reverse polarity protectionYes
Current consumption, max.90 mA
Power loss, typ.1.7 W
Inputs2 byte; + 2 bytes for QI information
Automatic encodingYes
Mechanical coding elementYes
Type of mechanical coding elementType A
1-wire connectionBU type A0
2-wire connectionBU type A0 + Potential distributor module
3-wire connectionBU type A0 + Potential distributor module
4-wire connectionBU type A0 + Potential distributor module
Number of digital inputs16
Digital inputs, parameterizableYes
Sourcing/sinking inputP-reading
for signal "0"-30 to +5 V
for signal "1"+11 to +30V
for signal "1", typ.2.5 mA
at "0" to "1", min.0.05 ms
at "0" to "1", max.20 ms
at "1" to "0", min.0.05 ms
at "1" to "0", max.20 ms
shielded, max.1 000 m
unshielded, max.600 m
2-wire sensorYes
permissible quiescent current (2-wire sensor), max.1.5 mA
Diagnostics functionYes
Diagnostic alarmYes
Diagnostic information readableYes
Monitoring the supply voltageYes
parameterizableYes
Group errorYes
Monitoring of the supply voltage (PWR-LED)Yes; green PWR LED
Channel status displayYes; green LED
for module diagnosticsYes; green/red DIAG LED
between the channels and backplane busYes
Isolation tested with707 V DC (type test)
horizontal installation, min.-30 °C; < 0 °C as of FS02
horizontal installation, max.60 °C
vertical installation, min.-30 °C; < 0 °C as of FS02
vertical installation, max.50 °C
Width15 mm
Height73 mm
Depth58 mm
Weight, approx.28 g
IDEA4
UNSPSC15
last modified:10/23/2025
⬇ Descargar datasheet (PDF)

Ficha técnica oficial del fabricante con todas las especificaciones.

Material con posibilidad de devolución
ET 200SP, DI 16x 24V DC ST, emb. 10
ET 200SP, DI 16x 24V DC ST, emb. 10
€111,46 EUR
€131,13 EUR
6ES7131-6BH01-2BA0
Plazo de entrega (días):
€111,46 EUR /cada
Total:
Envío 24/48 h Material en stock Garantía y RMA Gestión de devoluciones Asesoramiento técnico Abre un ticket de soporte Distribuidor oficial Marcas líderes del sector

Accesorios