ET 200SP, DI 8x 24V DC ST, emb. 1
Siemens

ET 200SP, DI 8x 24V DC ST, emb. 1

SIMATIC ET 200SP, módulo de entradas digitales, DI 8x 24VDC Standard, tipo de entrada 3 (CEI 61131), Sink Input, (PNP, tipo p), embalaje 1 pieza, apto para tipo de UB A0, código color CC01, retardo de entrada 0,05..20ms, diagnóstico de módulo para: cortocircuito alim. de encoders rotura hilo, tensión de alimentación

🔌 ComunicaciónYes
Entradas/Salidas y comunicación
suitable for operation on PROFINET R1 IMsYes
PROFIBUS from GSD version/GSD revisionOne GSD file each, Revision 3 and 5 and higher
PROFINET from GSD version/GSD revisionGSDML V2.3
Montaje y material
Color code for module-specific color-coded labelCC01
Condiciones ambientales
Installation altitude above sea level, max.5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Certificados y homologaciones
Type Examination CerMiscellaneous
Otras características
Product type designationDI 8x24 VDC ST
HW functional statusFrom FS02
Firmware versionV0.0
usable BaseUnitsBU type A0
I&M dataYes; I&M0 to I&M3
STEP 7 TIA Portal configurable/integrated from versionV14
STEP 7 configurable/integrated from versionV5.5 SP3 or higher
PCS 7 configurable/integrated from versionV8.1 SP1
PCS neo can be configured/integrated from versionV3.1
Rated value (DC)24 V
permissible range, lower limit (DC)19.2 V
permissible range, upper limit (DC)28.8 V
Reverse polarity protectionYes
Current consumption, max.50 mA; All channels are supplied from the encoder supply
Number of outputs8
Output voltage, min.19.2 V
Short-circuit protectionYes; per module
24 VYes
Output current, max.700 mA
Output current per channel, max.700 mA
Output current per module, max.700 mA
Power loss, typ.1 W; 24 V, 8 inputs supplied via encoder supply
Inputs1 byte; + 1 byte for QI information
Automatic encodingYes
Mechanical coding elementYes
Type of mechanical coding elementType A
1-wire connectionBU type A0
2-wire connectionBU type A0
3-wire connectionBU type A0 with AUX terminals or potential distributor module
4-wire connectionBU type A0 + Potential distributor module
Number of digital inputs8
Digital inputs, parameterizableYes
Sourcing/sinking inputP-reading
for signal "0"-30 to +5 V
for signal "1"+11 to +30V
for signal "1", typ.2.5 mA
at "0" to "1", min.0.05 ms
at "0" to "1", max.20 ms
at "1" to "0", min.0.05 ms
at "1" to "0", max.20 ms
shielded, max.1 000 m
unshielded, max.600 m
2-wire sensorYes
permissible quiescent current (2-wire sensor), max.1.5 mA
Diagnostics functionYes
Diagnostic alarmYes
Diagnostic information readableYes
Monitoring the supply voltageYes
parameterizableYes
Wire breakYes; module-wise
Short-circuitYes; module-wise
Monitoring of the supply voltage (PWR-LED)Yes; green PWR LED
Channel status displayYes; green LED
for module diagnosticsYes; green/red DIAG LED
between the channels and backplane busYes
Isolation tested with707 V DC (type test)
horizontal installation, min.-30 °C; < 0 °C as of FS02
horizontal installation, max.60 °C
vertical installation, min.-30 °C; < 0 °C as of FS02
vertical installation, max.50 °C
dew point, min.-60 °C; suitable for dry room applications
Width15 mm
Height73 mm
Depth58 mm
Weight, approx.28 g
IDEA4
UNSPSC15
CCC-ExNK / Nippon Kaiji Ky-
CCS (China ClassificaKR (Korean Register
tion Society)of Shipping)
last modified:3/10/2026
⬇ Descargar datasheet (PDF)

Ficha técnica oficial del fabricante con todas las especificaciones.

Material con posibilidad de devolución
ET 200SP, DI 8x 24V DC ST, emb. 1
ET 200SP, DI 8x 24V DC ST, emb. 1
€65,64 EUR
€77,22 EUR
6ES7131-6BF01-0BA0
Plazo de entrega (días):
€65,64 EUR /cada
Total:
Envío 24/48 h Material en stock Garantía y RMA Gestión de devoluciones Asesoramiento técnico Abre un ticket de soporte Distribuidor oficial Marcas líderes del sector

Accesorios