Especificaciones técnicas
Protección y seguridad
| fuse protection type in the feeder | three-poled coupled circuit breaker from 6 A characteristic C to 16 A |
|---|---|
| design of the overvoltage protection | < 32 V |
| property of the output short-circuit proof | Yes |
| design of short-circuit protection | Constant current characteristic |
| galvanic isolation between input and output | Yes |
| galvanic isolation | Output voltage: SELV, ES1 (IEC 62368-1), DVC As (IEC 61204-7) |
| operating resource protection class | Class I |
| protection class IP | IP20 |
Datos eléctricos
| type of the power supply network | 3-phase AC |
|---|---|
| buffering time for rated value of the output current in the event of | 5 ms |
| line frequency | 50/60 Hz |
| current limitation of inrush current at 25 °C maximum | 36 A |
| voltage curve at output | Controlled, isolated DC voltage |
| output voltage at DC rated value | 24 V |
| output voltage adjustable | Yes; via potentiometer |
| adjustable output voltage | 24 ... 28 V |
| relative overall tolerance of the voltage | 3% |
| behavior of the output voltage when switching on | Overshoot of Vout approx. 1 % |
| supplied active power typical | 480 W |
| efficiency in percent | 91 % |
| relative control precision of the output voltage with rapid | 0.2 % |
| relative control precision of the output voltage load step of | 0.5 % |
| relative control precision of the output voltage at load step of | 1% |
Prestaciones y durabilidad
| response delay maximum | 1.5 s |
|---|---|
| MTBF at 40 °C | 815 000 h |
Certificados y homologaciones
| CE marking | Yes |
|---|---|
| UL approval | Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259 |
| UKCA marking | Yes |
| EAC approval | Yes |
| Regulatory Compliance Mark (RCM) | Yes |
| CB-certificate | Yes |
Otras características
| minimum rated value | 400 V |
|---|---|
| maximum rated value | 500 V |
| initial value | 320 V |
| full-scale value | 550 V |
| wide range input | Yes |
| operating condition of the mains buffering | at Vin = 400/500 V |
| I2t value maximum | 0.9 A²·s |
| display version for normal operation | Green LED for 24 V OK |
| type of signal at output | Signal contact (signal load capacity: 5 mA) for DC OK |
| rated range | 0 ... 20 A; +55 ... +70 °C: Derating 2%/K |
| bridging of equipment | Yes |
| load step 10 to 90% typical | 1 ms |
| load step 90 to 10% typical | 1 ms |
| for emitted interference | EN 55032 Class A |
| for mains harmonics limitation | EN 61000-3-2 |
| for interference immunity | EN 61000-6-2 |
| type of electrical connection | push-in terminals |
| for signaling contact | 13, 14: push-in for 0.2 ... 1.5 mm² |
| width × height × depth of the enclosure | 95 × 135 × 150 mm |
| installation width × mounting height | 95 mm × 225 mm |
| top | 45 mm |
| bottom | 45 mm |
| left | 0 mm |
| right | 0 mm |
| fastening method | Snaps onto DIN rail EN 60715 35x7.5/15 |
| DIN-rail mounting | Yes |
| housing can be lined up | Yes |
| net weight | 1.66 kg |
| last modified: | 5/5/2026 |