Especificaciones técnicas
Protección y seguridad
| fuse protection type | 5A |
|---|---|
| fuse protection type in the feeder | Circuit breaker from 4 A characteristic C/6 A characteristic B to 10 A |
| design of the overvoltage protection | < 60 V |
| property of the output short-circuit proof | Yes |
| design of short-circuit protection | Shutdown and periodic restart attempts |
| galvanic isolation between input and output | Yes |
| galvanic isolation | Output voltage: SELV, ES1 (IEC 62368-1), DVC As (IEC 61204-7) |
| operating resource protection class | Class I |
| protection class IP | IP20 |
Datos eléctricos
| type of the power supply network | 1-phase AC or DC |
|---|---|
| supply voltage at DC | 110 ... 240 V |
| input voltage at DC | 85 ... 275 V |
| overvoltage overload capability | 300 V AC for 30 s |
| buffering time for rated value of the output current in the event of | 46 ms |
| line frequency | 50/60 Hz |
| current limitation of inrush current at 25 °C maximum | 6A |
| voltage curve at output | Controlled, isolated DC voltage |
| output voltage at DC rated value | 48 V |
| output voltage adjustable | Yes; via potentiometer |
| adjustable output voltage | 48 ... 56 V; max. 240 W (288 W up to 45°C) |
| relative overall tolerance of the voltage | 3% |
| behavior of the output voltage when switching on | Overshoot of Vout < 2 % |
| supplied active power typical | 240 W |
| efficiency in percent | 93.9 % |
| relative control precision of the output voltage at load step of | 1% |
Prestaciones y durabilidad
| response delay maximum | 0.5 s |
|---|
Certificados y homologaciones
| CE marking | Yes |
|---|---|
| UL approval | Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259 |
| UKCA marking | Yes |
| EAC approval | Yes |
| Regulatory Compliance Mark (RCM) | Yes |
| SEMI F47 | Yes |
| CB-certificate | Yes |
| shipbuilding approval | Yes |
| American Bureau of Shipping Europe Ltd. (ABS) | Yes |
| Det Norske Veritas (DNV) | Yes |
| China RoHS | BIS CRS |
Otras características
| minimum rated value | 120 V |
|---|---|
| maximum rated value | 240 V |
| initial value | 85 V |
| full-scale value | 264 V |
| wide range input | Yes |
| operating condition of the mains buffering | at Vin = 240 V |
| number of outputs | 1 |
| display version for normal operation | Green LED for 48 V OK |
| rated range | 0 ... 5 A; 6 A up to +45°C; +60 ... +70 °C: Derating 3%/K |
| parallel switching of outputs | can be set with DIP switch |
| bridging of equipment | Yes; switchable characteristic |
| load step 10 to 90% typical | 4 ms |
| load step 90 to 10% typical | 4 ms |
| for emitted interference | EN 55022 Class B |
| for mains harmonics limitation | EN 61000-3-2 |
| for interference immunity | EN 61000-6-2 |
| type of electrical connection | push-in terminals |
| for auxiliary contacts | 13, 14 (alarm signal): 1 push-in terminal each for 0.2 ... 1.5 mm² |
| width × height × depth of the enclosure | 45 × 135 × 125 mm |
| installation width × mounting height | 45 mm × 225 mm |
| top | 45 mm |
| bottom | 45 mm |
| left | 0 mm |
| right | 0 mm |
| fastening method | Snaps onto DIN rail EN 60715 35x7.5/15 |
| DIN-rail mounting | Yes |
| housing can be lined up | Yes |
| net weight | 0.9 kg |
| electrical accessories | Buffer module, redundancy module |
| mechanical accessories | Identification labels SIMATIC ET 200SP 6ES7193-6LF30-0AW0 |
| identification link | Yes; acc. to IEC 61406-1:2022 |
| last modified: | 5/5/2026 |