SIPLUS ET 200SP AI 4xU/I 2-w ST
Siemens

SIPLUS ET 200SP AI 4xU/I 2-w ST

SIPLUS ET 200SP AI 4 × U/I 2 hilos ST basado en 6ES7134-6HD01-0BA1 con revestimiento conformado, –40…+70 °C, módulo de entrada analógica, adecuado para BU tipo A0, A1, código de color CC03, diagnóstico de módulo, 16 bits, +/– 0,3 %

Montaje y material
Color code for module-specific color-coded labelCC03
Condiciones ambientales
Installation altitude above sea level, max.5 000 m
Certificados y homologaciones
China RoHSCCC-Ex
Otras características
Product type designationAI 4x U/I 2-wire
FW update possibleYes
based on6ES7134-6HD01-0BA1
usable BaseUnitsBU type A0, A1
I&M dataYes; I&M0 to I&M3
STEP 7 TIA Portal configurable/integrated from versionsee entry ID: 109746275
Reparameterization possible in RUNYes
Rated value (DC)24 V
permissible range, lower limit (DC)19.2 V
permissible range, upper limit (DC)28.8 V
Reverse polarity protectionYes
Current consumption, max.37 mA; without sensor supply
24 VYes
Short-circuit protectionYes
Output current, max.20 mA; max. 50 mA per channel for a duration < 10 s
Power loss, typ.0.85 W; Without encoder supply voltage
Address space per module, max.8 byte; + 1 byte for QI information
Automatic encodingYes
Mechanical coding elementYes
Type of mechanical coding elementType A
2-wire connectionBU type A0, A1
Number of analog inputs4; > 60 °C max. 1x ±20 mA or 4x ±10 V permissible
0 to +10 VYes; 15 bit
Input resistance (0 to 10 V)120 kΩ
1 V to 5 VYes; 15 bit
Input resistance (1 V to 5 V)120 kΩ
10 V to +10 VYes; 16 bit incl. sign
Input resistance (-10 V to +10 V)120 kΩ
5 V to +5 VYes; 16 bit incl. sign
Input resistance (-5 V to +5 V)120 kΩ
0 to 20 mAYes; 15 bit
Input resistance (0 to 20 mA)100 Ω; + approx. 0.7 V diode forward voltage
4 mA to 20 mAYes; 15 bit
Input resistance (4 mA to 20 mA)100 Ω; + approx. 0.7 V diode forward voltage
shielded, max.1 000 m; 200 m for voltage measurement
Measurement principleintegrating (Sigma-Delta)
Resolution with overrange (bit including sign), max.16 bit
Integration time, parameterizableYes
Interference voltage suppression for interference16.6 / 50 / 60 Hz
Conversion time (per channel)180 / 60 / 50 ms
Number of smoothing levels4; None; 4/8/16 times
parameterizableYes
for voltage measurementYes
for current measurement as 2-wire transducerYes
Burden of 2-wire transmitter, max.650 Ω
Linearity error (relative to input range), (+/-)0.02 %
Temperature error (relative to input range), (+/-)0.005 %/K
Crosstalk between the inputs, min.50 dB
Voltage, relative to input range, (+/-)1.3 %
Current, relative to input range, (+/-)1.3 %
Series mode interference (peak value of interference <70 dB
Common mode voltage, max.10 V
Common mode interference, min.90 dB
Diagnostics functionYes
Diagnostic alarmYes
Monitoring the supply voltageYes
Wire breakYes; at 4 to 20 mA
Group errorYes
Overflow/UnderflowYes
Monitoring of the supply voltage (PWR-LED)Yes; green LED
Channel status displayYes; green LED
for module diagnosticsYes; green/red LED
between the channels and backplane busYes
between the channels and the power supply of theYes; only for voltage inputs
between the inputs (UCM)10 V DC
Isolation tested with707 V DC (type test)
Suitable for applications according to AMS 2750Yes; Declaration of Conformity, see online support entry 109757262
Suitable for applications according to CQI-9Yes
horizontal installation, min.-40 °C; = Tmin (incl. condensation/frost)
horizontal installation, max.70 °C; = Tmax; > 60 °C max. 1x ±20 mA or 4x ±10 V permissible
vertical installation, min.-40 °C; = Tmin
vertical installation, max.50 °C; = Tmax
2-38, max.horizontal installation
Resistant to commercially available coolants andYes; Incl. diesel and oil droplets in the air
60721-3-3Class 3B3 on request
to EN 60721-3-30AA0)
60721-3-6request
to EN 60721-3-60AA0)
conditions acc. to EN 60721, EN 60654-4 andduring operation!
Protection against fouling acc. to EN 60664-3Yes; Type 1 protection
Military testing according to MIL-I-46058C, Amendment 7Yes; Discoloration of coating possible during service life
Qualification and Performance of Electrical InsulatingYes; Conformal coating, Class A
Width15 mm
Height73 mm
Depth58 mm
Weight, approx.31 g
IDEA4
UNSPSC15
EMVFor use in hazardous locations
last modified:10/23/2025

Ficha técnica oficial del fabricante con todas las especificaciones.

PDF Ficha técnica
Producto bajo pedido

Puedes pedirlo ya: te lo servimos en el plazo indicado. Selecciona la cantidad para añadirlo al carrito.

Plazo de entrega (días):
Avísame cuando haya stock

Si prefieres esperar a que vuelva a haber envío inmediato, déjanos tu email.

Solo usaremos tu email para avisarte de este artículo.

Avísame cuando esté disponible
SIPLUS ET 200SP AI 4xU/I 2-w ST
SIPLUS ET 200SP AI 4xU/I 2-w ST
€414,91 EUR
€461,01 EUR
6AG1134-6HD01-7BA1
Plazo de entrega (días):
€414,91 EUR /cada
Total:
Envío 24/48 h Material en stock Garantía y RMA Gestión de devoluciones Asesoramiento técnico Abre un ticket de soporte Distribuidor oficial Marcas líderes del sector

Accesorios