LOGO!Power/1AC/DC12V/0.9A
Siemens

LOGO!Power/1AC/DC12V/0.9A

LOGO!POWER 12 V/0,9 A fuente de alimentación estabilizada entrada: 100-240 V AC salida: 12 V DC/0,9 A

Medición y rango
relative control precision of the output voltage with rapid0.2 %
relative control precision of the output voltage at load step of3%
Prestaciones y durabilidad
MTBF at 40 °C3 793 080 h
Otras características
type of the power supply network1-phase AC or DC
minimum rated value100 V
maximum rated value240 V
initial value85 V
full-scale value264 V
input voltage at DC110 ... 300 V
wide range inputYes
overvoltage overload capability300 V AC for 1 s
operating condition of the mains bufferingat Vin = 187 V
line frequency50/60 Hz
at rated input voltage 120 V0.3 A
at rated input voltage 230 V0.2 A
current limitation of inrush current at 25 °C maximum20 A
I2t value maximum0.8 A²·s
fuse protection typeinternal
voltage curve at outputControlled, isolated DC voltage
output voltage at DC rated value12 V
at output 1 at DC rated value12 V
relative overall tolerance of the voltage3%
on slow fluctuation of input voltage0.1 %
on slow fluctuation of ohm loading0.1 %
maximum200 mV
typical30 mV
display version for normal operationGreen LED for output voltage OK
behavior of the output voltage when switching onNo overshoot of Vout (soft start)
response delay maximum0.5 s
rated value0.9 A
rated range0 ... 0.9 A; +55 ... +70 °C: Derating 2%/K
supplied active power typical10.8 W
efficiency in percent78 %
at rated output voltage for rated value of the output3W
during no-load operation maximum0.3 W
load step 10 to 90% typical1 ms
load step 90 to 10% typical1 ms
design of the overvoltage protection< 60 V
property of the output short-circuit proofYes
design of short-circuit protectionConstant current characteristic
when switching on150% Iout rated typ. 200 ms
in normal operationoverload capability 150% Iout rated typ. 200 ms
galvanic isolation between input and outputYes
galvanic isolationOutput voltage: SELV, ES1 (IEC 62368-1), DVC As (IEC 61204-7)
operating resource protection classClass II (without protective conductor)
protection class IPIP20
for emitted interferenceEN 55022 Class B
for mains harmonics limitationnot applicable
for interference immunityEN 61000-6-2
CE markingYes
UL approvalYes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus-
EAC approvalYes
NEC Class 2Yes; according to UL1310, File E151273
SEMI F47Yes
CB-certificateYes
shipbuilding approvalYes
American Bureau of Shipping Europe Ltd. (ABS)Yes
French marine classification society (BV)Yes
Det Norske Veritas (DNV)Yes
Lloyds Register of Shipping (LRS)Yes
total83.3 kg
during manufacturing1.3 kg
during operation81.9 kg
during transport-40 ... +85 °C
during storage-40 ... +85 °C
type of electrical connectionscrew terminal
at output+, -: 1 screw terminal each for 0.5 ... 2.5 mm²
width × height × depth of the enclosure18 × 90 × 53 mm
installation width × mounting height18 mm × 130 mm
top20 mm
bottom20 mm
left0 mm
right0 mm
DIN-rail mountingYes
wall mountingYes
housing can be lined upYes
net weight0.07 kg
IDEA4
UNSPSC15
last modified:5/5/2026
⬇ Descargar datasheet (PDF)

Ficha técnica oficial del fabricante con todas las especificaciones.

Material con posibilidad de devolución
LOGO!Power/1AC/DC12V/0.9A
€40,40 EUR
€57,71 EUR
6EP3320-6SB00-0AY0
Plazo de entrega (días):
€40,40 EUR /cada
Total:

Accesorios