SITOP PSU8400/3AC/DC24V/20A IOL

DescripciónEspecificacionesDescargasGarantías

SITOP PSU8400 3AC 20A IOL fuente de alimentación estabilizada entrada: 400-500 V 3 AC salida: 24 V DC/20 A con conexión IO-Link

🔌 Comunicación	Yes

Entradas/Salidas y comunicación

design of the interface	IO-Link
IO-Link protocol	Yes
IO-Link transfer rate	COM3 (230.4 kBaud)
number of IO-Link ports	1
point-to-point cycle time between master and IO-Link device	10 ms
protocol between master and IO-Link device Version 1.1	Yes
design of the interface for communication	L+, C/Q, L- (IO-Link): 1 push-in terminal each for 0.2 ... 1.5 mm²

Medición y rango

relative control precision of the output voltage with rapid	1%
relative control precision of the output voltage at load step of	3%

Prestaciones y durabilidad

MTBF at 40 °C	440 000 h

Otras características

type of the power supply network	3-phase AC or DC
minimum rated value	400 V
maximum rated value	500 V
initial value	323 V
full-scale value	576 V
supply voltage at AC	Derating 323 ... 360 and 550 ... 576 V
supply voltage at DC	500 ... 550 V
input voltage at DC	450 ... 600 V
wide range input	Yes
operating condition of the mains buffering	at Vin = 400 V
line frequency	50/60 Hz
at rated input voltage 400 V	0.9 A
at rated input voltage 500 V	0.7 A
at rated input voltage 550 V	1A
current limitation of inrush current at 25 °C maximum	3A
I2t value maximum	0.1 A²·s
fuse protection type	none
voltage curve at output	Controlled, isolated DC voltage
number of outputs	1
output voltage at DC rated value	24 V
at output 1 at DC rated value	24 V
output voltage adjustable	Yes; via display and IO-Link interface
adjustable output voltage	22 ... 28 V; Derating > 24 V: max. 480 W power output (576 W to 45°C)
relative overall tolerance of the voltage	3%
on slow fluctuation of input voltage	0.2 %
on slow fluctuation of ohm loading	0.2 %
maximum	20 mV
display version for normal operation	display and 3-color LED for operating, fault and communication status
behavior of the output voltage when switching on	No overshoot of Vout (soft start)
response delay maximum	0.5 s
typical	50 ms
rated value	20 A
per output	20 A
at output 1 rated value	20 A
rated range	0 ... 20 A; 24 A up to 45 °C; +60 ... +70 °C: derating 3.75%/K
supplied active power typical	480 W
at short-circuit during operation typical	60 A
at short-circuit during operation	25 ms
efficiency in percent	96 %
at rated output voltage for rated value of the output	20 W
during no-load operation maximum	3.3 W
design of the overvoltage protection	max. 32 V
property of the output short-circuit proof	Yes
response value current limitation	15 ... 24.5 A
design of the current limitation	adjustable via display and IO-Link
in normal operation	150 % IaRated up to 5 s/min (configurable via display and IO-Link)
display version for overload and short circuit	display and 3-color LED for operating status
design of the reset device/resetting mechanism	via display and IO-Link
product function communication function	Yes
galvanic isolation between input and output	Yes
galvanic isolation	Output voltage: SELV, ES1 (IEC 62368-1), DVC As (IEC 61204-7)
operating resource protection class	Class I
protection class IP	IP20
for emitted interference	EN 55022 Class B
for mains harmonics limitation	EN 61000-3-2
for interference immunity	EN 61000-6-2
CE marking	Yes
UL approval	Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259
UKCA marking	Yes
EAC approval	Yes
Regulatory Compliance Mark (RCM)	Yes
SEMI F47	Yes
CB-certificate	Yes
total	541.2 kg
during manufacturing	33.8 kg
during operation	506.8 kg
during transport	-40 ... +85 °C
during storage	-40 ... +85 °C
type of electrical connection	screw-type terminals and push-in terminals
for auxiliary contacts	PAR SYNC OUT/IN: 1 push-in terminal each for 0.2 ... 1.5 mm²
for signaling contact	13, 14: 1 push-in terminal each for 0.2 ... 1.5 mm²
width × height × depth of the enclosure	59 × 145 × 125 mm
installation width × mounting height	59 mm × 225 mm
top	40 mm
bottom	40 mm
left	0 mm
right	0 mm
fastening method	Snaps onto DIN rail EN 60715 35x7.5/15
DIN-rail mounting	Yes
housing can be lined up	Yes
net weight	1.15 kg
identification link	Yes; acc. to IEC 61406-1:2022
last modified:	5/5/2026

⬇ Descargar datasheet (PDF)

Ficha técnica oficial del fabricante con todas las especificaciones.

Material con posibilidad de devolución

SITOP PSU8400/3AC/DC24V/20A IOL

Salvar 30%

6EP3436-8SB00-4AY0

€353,43 EUR

~~€504,90 EUR~~

6EP3436-8SB00-4AY0

Plazo de entrega (días):

€353,43 EUR /cada

Plazo de entrega (días):

€353,43 EUR /cada

Total:

Total: €0,00 EUR

en el carrito Total: