€704,93 EUR
+ IVA
Especificaciones técnicas
Protección y seguridad
| fuse protection type | internal |
|---|---|
| design of the overvoltage protection | max. 35 V (max. 500 ms) |
| property of the output short-circuit proof | Yes |
| galvanic isolation between input and output | Yes |
| galvanic isolation | Output voltage: SELV, ES1 (IEC 62368-1), DVC As (IEC 61204-7) |
| operating resource protection class | Class I |
| protection class IP | IP20 |
Datos eléctricos
| type of the power supply network | 1-phase and 2-phase AC or DC |
|---|---|
| supply voltage at DC | 110 ... 220 V |
| input voltage at DC | 93 ... 275 V |
| buffering time for rated value of the output current in the event of | 20 ms |
| line frequency | 50/60 Hz |
| current limitation of inrush current at 25 °C maximum | 15 A |
| voltage curve at output | Controlled, isolated DC voltage |
| output voltage at DC rated value | 24 V |
| output voltage adjustable | Yes; via potentiometer or IE/PN interface |
| relative overall tolerance of the voltage | 3% |
| behavior of the output voltage when switching on | No overshoot of Vout (soft start) |
| supplied active power typical | 480 W |
| efficiency in percent | 92 % |
| relative control precision of the output voltage with rapid | 0.1 % |
| relative control precision of the output voltage load step of | 0.4 % |
| adjustable current response value current of the current | 0.5 ... 5 A |
Entradas/Salidas y comunicación
| design of the interface | Ethernet/PROFINET |
|---|---|
| design of the interface PROFINET protocol | Yes |
| OPC UA | Yes |
| design of the interface for communication | PROFINET/Ethernet: two RJ45 sockets (2-port switch) |
Conexión y cableado
| removable terminal at input | Yes |
|---|---|
| removable terminal at output | Yes |
Prestaciones y durabilidad
| response delay maximum | 1 s; Without on-delay of the outputs |
|---|---|
| MTBF at 40 °C | 186 700 h |
Certificados y homologaciones
| CE marking | Yes |
|---|---|
| UL approval | Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259 |
| EAC approval | Yes |
| SEMI F47 | Yes |
| CB-certificate | Yes |
| shipbuilding approval | Yes |
| American Bureau of Shipping Europe Ltd. (ABS) | Yes |
| China RoHS | BIS CRS |
Otras características
| minimum rated value | 100 V |
|---|---|
| maximum rated value | 240 V |
| initial value | 85 V |
| full-scale value | 275 V |
| wide range input | Yes |
| I2t value maximum | 4.33 A²·s |
| number of outputs | 4 |
| per output | 5A |
| rated range | 0 ... 20 A |
| type of response value setting | via potentiometer or IE/PN interface |
| design of the reset device/resetting mechanism | via sensor per output or IE/PN interface |
| remote reset function | non-isolated 24 V input (signal level "high" at > 15 V) |
| product function communication function | Yes |
| for emitted interference | EN 55022 Class B |
| for mains harmonics limitation | EN 61000-3-2 |
| for interference immunity | EN 61000-6-2 |
| type of electrical connection | Plug-in terminals with screwed connection |
| suitability for interaction modular system | Yes |
| width × height × depth of the enclosure | 125 × 125 × 150 mm |
| installation width × mounting height | 125 mm × 225 mm |
| top | 50 mm |
| bottom | 50 mm |
| left | 0 mm |
| right | 0 mm |
| fastening method | Snaps onto DIN rail EN 60715 35x15 |
| DIN-rail mounting | Yes |
| housing can be lined up | Yes |
| net weight | 2.6 kg |
| electrical accessories | Expansion modules CNX8600, buffer modules BUF8600, module UPS8600 |
| mechanical accessories | Device identification label 20 mm × 7 mm, TI-grey 3RT2900-1SB20 |
| last modified: | 5/5/2026 |
Accesorios
-