Contactor para ferrocarriles, AC-3e/AC-3, 38 A, 18,5 kW/400 V, 3 polos, 110 V DC, 0,7-1,25* Uc, a...

Contactor para ferrocarriles, AC-3e/AC-3, 38 A, 18,5 kW/400 V, 3 polos, 110 V DC, 0,7-1,25* Uc, a...

Especificaciones
Contactor para ferrocarriles, AC-3e/AC-3, 38 A, 18,5 kW/400 V, 3 polos, 110 V DC, 0,7-1,25* Uc, accionamiento electrónico, con varistor integrado, contactos auxiliares: 1 NA + 1 NC, borne de resorte, tamaño: S0

Ficha técnica oficial del fabricante con todas las especificaciones.

Producto bajo pedido

Puedes pedirlo ya: te lo servimos en el plazo indicado. Selecciona la cantidad para añadirlo al carrito.

Plazo de entrega (días):
Avísame cuando haya stock

Si prefieres esperar a que vuelva a haber envío inmediato, déjanos tu email.

Solo usaremos tu email para avisarte de este artículo.

Avísame cuando esté disponible

Contactor para ferrocarriles, AC-3e/AC-3, 38 A, 18,5 kW/400 V, 3 polos, 110 V DC, 0,7-1,25* Uc, a...
3RT2028-2XF40-0LA2
Plazo de entrega (días):
€297,34 EUR /cada
Total:

Especificaciones técnicas

Protección y seguridad
design of the miniature circuit breaker for short-circuit protectionC characteristic: 10 A; 0.4 kA
for short-circuit protection of the auxiliary switch requiredgG: 10 A (690 V, 1 kA)
device type according to ISO 13849-13
overdimensioning according to ISO 13849-2 necessaryYes
safety device type according to IEC 61508-2Type A
protection class IP on the front according to IEC 60529IP20
touch protection on the front according to IEC 60529finger-safe, for vertical contact from the front
Datos eléctricos
without load current share typical1.3 W
type of calculation of power loss current-dependentquadratic
maximum permissible voltage for protective separation between400 V
number of poles for main current circuit3
limited to 1 s switching at zero current maximum593 A; Use minimum cross-section acc. to AC-1 rated value
limited to 5 s switching at zero current maximum341 A; Use minimum cross-section acc. to AC-1 rated value
limited to 10 s switching at zero current maximum260 A; Use minimum cross-section acc. to AC-1 rated value
limited to 30 s switching at zero current maximum199 A; Use minimum cross-section acc. to AC-1 rated value
limited to 60 s switching at zero current maximum162 A; Use minimum cross-section acc. to AC-1 rated value
type of voltageDC
type of voltage of the control supply voltageDC
control supply voltage at DC rated value110 V
inrush current peak15 A
duration of inrush current peak30 µs
pickup current mean value0.13 A
pickup current peak0.19 A
duration of pickup current180 ms
holding current mean value19 mA
closing power of magnet coil at DC13.2 W
holding power of magnet coil at DC1.3 W
operational current at AC-12 maximum10 A
for main current circuitspring-loaded terminals
Conexión y cableado
size of contactorS0
for AWG cables for main contacts2x (18 ... 8)
for AWG cables for auxiliary contacts2x (20 ... 14)
AWG number as coded connectable conductor cross18 ... 8
Condiciones ambientales
installation altitude at height above sea level maximum2 000 m
up to 690 V at ambient temperature 40 °C rated50 A
up to 690 V at ambient temperature 60 °C rated42 A
Prestaciones y durabilidad
B10 value with high demand rate according to SN 319201 000 000
Certificados y homologaciones
UL File Number (CCN)E31519 (NLDX, NLDX7)
Otras características
product brand nameSIRIUS
design of the productWith extended operating range
product type designation3RT2
auxiliary switchYes
Net Weight0.594 g
relative humidity minimum10 %
relative humidity at 55 °C according to IEC 60068-2-3095 %
number of NO contacts for main contacts3
up to 40 °C according to IEC 60077 rated value50 A
up to 70 °C according to IEC 60077 rated value38 A
initial value0.7
full-scale value1.25
design of the surge suppressorwith varistor
arcing time10 ms
control version of the switch operating mechanismStandard A1 - A2
number of NC contacts for auxiliary contacts1
instantaneous contact1
number of NO contacts for auxiliary contacts1
contact rating of auxiliary contacts according to ULA600 / Q600
fastening method side-by-side mountingYes
height102 mm
width45 mm
depth107 mm
forwards10 mm
upwards10 mm
downwards10 mm
for auxiliary and control circuitspring-loaded terminals
solid2x (1 ... 10 mm²)
solid or stranded2x (1 ... 10 mm²)
finely stranded with core end processing2x (1 ... 6 mm²)
finely stranded without core end processing2x (1 ... 6 mm²)
mirror contact according to IEC 60947-4-1Yes
suitable for safety functionYes
suitability for use safety-related switching OFFYes
service life maximum20 a
test wear-related service life necessaryYes
failure rate [FIT] with low demand rate according to SN100 FIT
ates/Test Reportate
RailwayDangerous goods
A1 (+)1/L1
3/L25/L3
A2 (-)2/T1
4/T26/T3
last modified:4/4/2026

Accesorios