ET 200SP, TM PTO 2x24V
Siemens

ET 200SP, TM PTO 2x24V

SIMATIC ET 200SP, TM PTO 2x24V, módulo de interfaz para accionamientos paso a paso, 2 canales Pulse Train Output, PTO: 24 V, 2 DI, 1 DQ 24 VDC por canal, apto para BU tipo A0

🔌 ComunicaciónGSDML V2.35
Entradas/Salidas y comunicación
PROFIBUS from GSD version/GSD revisionOne GSD file each, Revision 3 and 5 and higher
PROFINET from GSD version/GSD revisionGSDML V2.35
PTO (pulse train output) signal interfaceYes
For signal interface 24 V asymmetrical200 kHz; For 24 V PTO outputs
Number of RS 485 interfaces0
to standard PROFIBUS masterYes; Via control and feedback interface
to standard PROFINET controllerYes; Via control and feedback interface
Montaje y material
Color code for module-specific color-coded labelCC00
Condiciones ambientales
Installation altitude above sea level, max.5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Certificados y homologaciones
Type Examination CerMiscellaneous
Otras características
Product type designationTM PTO 2x24V
usable BaseUnitsBU type A0
I&M dataYes; I&M0 to I&M3
Isochronous modeYes
STEP 7 TIA Portal configurable/integrated from versionSTEP 7 V17 with HSP or higher
Rated value (DC)24 V
permissible range, lower limit (DC)19.2 V
permissible range, upper limit (DC)28.8 V
Reverse polarity protectionYes
Current consumption, max.50 mA; without load
Power loss, typ.1.5 W
Inputs32 byte
Outputs16 byte
Automatic encodingYes
Mechanical coding elementYes
Number of digital inputs6; 3 per channel
Digital inputs, parameterizableYes
SynchronizationYes
ProbeYes
Drive readyYes
for signal "0"-5 ... +5 V
for signal "1"+11 to +30V
permissible voltage at input, min.-30 V; -5 V continuous, -30 V brief reverse polarity protection
permissible voltage at input, max.30 V
for signal "1", typ.2.5 mA
parameterizableYes; none / 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms
shielded, max.1 000 m
unshielded, max.600 m
Number of digital outputs6; 3 per channel
Current-sinkingYes; push-pull outputs for 24 V PTO outputs
Current-sourcingYes
Digital outputs, parameterizableYes
Short-circuit protectionYes; electronic/thermal
Response threshold, typ.1A
Controlling a digital inputYes
24 V asymmetricalYes
Pulse and directionYes
Count up, count downYes
Incremental encoder (A, B phase shift)Yes
Incremental encoder (A, B phase shift, quadruple)Yes
with resistive load, max.0.1 A; 0.5 A for CHn.ED
on lamp load, max.1 W; 5 W for CHn.ED
lower limit240 Ω; 48 ohms for CHn.ED
upper limit12 kΩ
for signal "1", min.23.2 V; L+ (-1.3 V), L+ (-0.8 V) for CHn.ED
for signal "1" rated value0.1 A; 0.5 A for CHn.ED
for signal "1" permissible range, max.0.12 A; 0.6 A for CHn.ED
for signal "1" minimum load current2 mA
for signal "0" residual current, max.0.5 mA
with inductive load, max.0.5 Hz; According to IEC 60947-5-1, DC-13
Current per module, max.1.4 A
Diagnostic alarmYes
Monitoring the supply voltageYes
Short-circuitYes
Monitoring of the supply voltage (PWR-LED)Yes; green PWR LED
Channel status displayYes; green LED
for module diagnosticsYes; green/red DIAG LED
between the channels and backplane busYes
Isolation tested with707 V DC (type test)
horizontal installation, min.-30 °C
horizontal installation, max.60 °C; Observe derating
vertical installation, min.-30 °C
vertical installation, max.50 °C; Observe derating
dew point, min.-60 °C; suitable for dry room applications
to SIMATIC S7-300Yes; Via control and feedback interface
to SIMATIC S7-400Yes; Via control and feedback interface
to SIMATIC S7-1200Yes
to SIMATIC S7-1500Yes
Width15 mm
Height73 mm
Depth58 mm
Weight, approx.45 g
IDEA4
UNSPSC15
CCC-ExFM
last modified:1/22/2026
⬇ Descargar datasheet (PDF)

Ficha técnica oficial del fabricante con todas las especificaciones.

Material con posibilidad de devolución
ET 200SP, TM PTO 2x24V
€498,32 EUR
€508,49 EUR
6ES7138-6EB00-0BA0
Plazo de entrega (días):
€498,32 EUR /cada
Total:

Accesorios