ET 200SP, TM Pulse 2x24V

DescripciónEspecificacionesDescargasGarantías

SIMATIC ET 200SP, TM Pulse 2x 24V PWM y salida de impulsos 2 canales 2 A para válvulas proporcionales y motores DC

🔌 Comunicación	GSDML V2.31

Entradas/Salidas y comunicación

PROFIBUS from GSD version/GSD revision	GSD Revision 5
PROFINET from GSD version/GSD revision	GSDML V2.31
Number of RS 485 interfaces	0
to standard PROFIBUS master	Yes
to standard PROFINET controller	Yes

Montaje y material

Color code for module-specific color-coded label	CC40

Otras características

Product type designation	TM Pulse 2x24 V
HW functional status	From FS03
Firmware version	V1.0
FW update possible	Yes
usable BaseUnits	BU type B1
I&M data	Yes; I&M 0
Isochronous mode	Yes
STEP 7 TIA Portal configurable/integrated from version	V13 SP1 + HSP
STEP 7 configurable/integrated from version	V5.5 SP4 and higher
Rated value (DC)	24 V
permissible range, lower limit (DC)	19.2 V
permissible range, upper limit (DC)	28.8 V
Short-circuit protection	Yes
Reverse polarity protection	Yes; against destruction
Current consumption, max.	70 mA; without load
Number of outputs	2; A common 24V encoder supply for both channels
24 V	Yes; L+ (-0.8 V)
Output current, max.	300 mA
Power loss, typ.	1.7 W
Inputs	16 byte; 8 per channel
Outputs	24 byte; 12 per channel
Automatic encoding	Yes
Mechanical coding element	Yes
Type of mechanical coding element	type C
Number of digital inputs	2; 1 per channel
Digital inputs, parameterizable	Yes
Freely usable digital input	Yes
HW enable for digital output	Yes
Type of input voltage	DC
for signal "0"	-5 ... +5 V
for signal "1"	+11 to +30V
permissible voltage at input, min.	-30 V; -5 V continuous, -30 V brief reverse polarity protection
permissible voltage at input, max.	30 V
for signal "1", typ.	2.5 mA
parameterizable	Yes; none / 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms
Type of digital output	P- and M-switching
Number of digital outputs	2; 1 per channel
Current-sinking	Yes
Current-sourcing	Yes
Digital outputs, parameterizable	Yes
Response threshold, typ.	6.8 A with Standard output, 2 A with High Speed output
Limitation of inductive shutdown voltage to	-0.8 V
Controlling a digital input	Yes
Accuracy of pulse duration	±100 ppm ±0.5 µs with High Speed output, ±100 ppm ±9 µs with Standard
minimum pulse duration	1.5 µs; With High Speed output, 10 µs with Standard output
Freely usable digital output	Yes
PWM output	Yes
Number, max.	2; 1 per channel
Cycle duration, parameterizable	Yes; Max. 85 s
ON period, min.	0%
ON period, max.	100 %
Resolution of the duty cycle	0.0036 %; For S7 analog format, min. 20 ns
Connection of a proportional valve	Yes
Dithering	Yes
Frequency adjustable	Yes
Amplitude adjustable	Yes
Current measurement	Yes
Current control	Yes
Connection of a DC motor	Yes
ON-delay	Yes
OFF-delay	Yes
Frequency output	Yes
Pulse train	Yes
Pulse output	Yes
with resistive load, max.	2A
on lamp load, max.	10 W; 1 W with High Speed output
lower limit	12 Ω; 240 ohm with High Speed output
upper limit	12 kΩ
Type of output voltage	DC
for signal "0", max.	1V
for signal "1", min.	23.2 V; L+ (-0.8 V)
for signal "1" rated value	2 A; 0.1 A with High Speed output, observe derating
"0" to "1", typ.	0 µs; With High Speed output, 4.5 µs with Standard output
"0" to "1", max.	0.8 µs; With High Speed output, 9 µs with Standard output
"1" to "0", typ.	0 µs; With High Speed output, 4.5 µs with Standard output
"1" to "0", max.	0.8 µs; With High Speed output, 9 µs with Standard output
for uprating	Yes
with inductive load, max.	100 kHz; With High Speed output, 10 kHz with standard output
Current per channel, max.	2A
Current per group, max.	4A
Current per module, max.	4A
Jitter, max.	1 µs; typically ±
Diagnostics function	Yes
Substitute values connectable	Yes; Parameterizable
Diagnostic alarm	Yes
Monitoring the supply voltage	Yes
short-circuit	Yes
Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED
Channel status display	Yes
for module diagnostics	Yes; green/red DIAG LED
between the channels and backplane bus	Yes
Isolation tested with	707 V DC (type test)
horizontal installation, min.	-30 °C
horizontal installation, max.	60 °C; Observe derating
vertical installation, min.	-30 °C
vertical installation, max.	50 °C; Observe derating
dew point, min.	-60 °C; suitable for dry room applications
to SIMATIC S7-300	Yes
to SIMATIC S7-400	Yes
to SIMATIC S7-1200	Yes
to SIMATIC S7-1500	Yes
Width	20 mm
Height	73 mm
Depth	58 mm
Weight, approx.	50 g
IDEA	4
UNSPSC	15
tificate	ate
other	Environment
last modified:	4/23/2026

⬇ Descargar datasheet (PDF)

Ficha técnica oficial del fabricante con todas las especificaciones.

Material con posibilidad de devolución

ET 200SP, TM Pulse 2x24V

Descuento 1%

6ES7138-6DB00-0BB1

€509,75 EUR

~~€520,15 EUR~~

6ES7138-6DB00-0BB1

Plazo de entrega (días):

€509,75 EUR /cada

Plazo de entrega (días):

€509,75 EUR /cada

Total:

Total: €0,00 EUR

en el carrito Total: