ET 200SP, AI 2xI 2-/4-Wire ST, 1 un.
Siemens

ET 200SP, AI 2xI 2-/4-Wire ST, 1 un.

SIMATIC ET 200SP, módulo de entrada analógica, AI 2xI 2-/4-Wire Standard, cantidad por paquete: 1 unidad, adecuado para tipo de BU A0, A1, Código de color CC05, diagnóstico de módulo, 16 bits

🔌 ComunicaciónV2.3 / -
Entradas/Salidas y comunicación
PROFIBUS from GSD version/GSD revisionOne GSD file each, Revision 3 and 5 and higher
PROFINET from GSD version/GSD revisionV2.3 / -
Montaje y material
Color code for module-specific color-coded labelCC05
Condiciones ambientales
Installation altitude above sea level, max.5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Otras características
Product type designationAI 2xI 2-/4-wire ST
HW functional statusfrom FS04
FW update possibleYes
usable BaseUnitsBU type A0, A1
I&M dataYes; I&M0 to I&M3
STEP 7 TIA Portal configurable/integrated from versionV13 SP1
STEP 7 configurable/integrated from versionV5.5 SP3
Reparameterization possible in RUNYes
Rated value (DC)24 V
permissible range, lower limit (DC)19.2 V
permissible range, upper limit (DC)28.8 V
Reverse polarity protectionYes
Current consumption, max.45 mA; without sensor supply
24 VYes
Short-circuit protectionYes
Output current, max.50 mA; Total current for both channels (two-wire)
Power loss, typ.1.1 W
Address space per module, max.4 byte; + 1 byte for QI information
Automatic encodingYes
Mechanical coding elementYes
Type of mechanical coding elementType A
1-wire connectionBU type A0, A1
2-wire connectionBU type A0, A1
4-wire connectionBU type A0, A1
Number of analog inputs2
For current measurement2
Cycle time (all channels), min.500 µs
0 to 20 mAYes; 15 bit
Input resistance (0 to 20 mA)130 Ω; 90 ohms with two wires
20 mA to +20 mAYes; 16 bit incl. sign
Input resistance (-20 mA to +20 mA)130 Ω
4 mA to 20 mAYes; 15 bit
Input resistance (4 mA to 20 mA)130 Ω; 90 ohms with two wires
shielded, max.1 000 m
Measurement principleSigma Delta
Resolution with overrange (bit including sign), max.16 bit
Integration time, parameterizableYes
Interference voltage suppression for interference16.6 / 50 / 60 Hz / off
Conversion time (per channel)50 ms @ 60 Hz, 60 ms @ 50 Hz, 180 ms @ 16.6 Hz, 500 µs without filter
Number of smoothing levels4
parameterizableYes
Step: NoneYes; 1x conversion time
Step: lowYes; 4x conversion time
Step: MediumYes; 8x conversion time
Step: HighYes; 16x conversion time
for current measurement as 2-wire transducerYes
Burden of 2-wire transmitter, max.650 Ω
for current measurement as 4-wire transducerYes
Linearity error (relative to input range), (+/-)0.01 %
Temperature error (relative to input range), (+/-)0.005 %/K
Crosstalk between the inputs, min.-50 dB
Current, relative to input range, (+/-)0.5 %
Series mode interference (peak value of interference <70 dB
Common mode voltage, max.10 V
Common mode interference, min.90 dB
Diagnostics functionYes
Diagnostic alarmYes
Monitoring the supply voltageYes
Wire breakYes; at 4 to 20 mA
short-circuitYes; Short-circuit of the encoder supply
Group errorYes
Overflow/UnderflowYes
Monitoring of the supply voltage (PWR-LED)Yes; green PWR LED
Channel status displayYes; green LED
for module diagnosticsYes; green/red DIAG LED
between the channels and backplane busYes
between the channels and the power supply of theYes
between the inputs (UCM)10 Vpp
Isolation tested with707 V DC (type test)
horizontal installation, min.-30 °C; < 0 °C as of FS04
horizontal installation, max.60 °C
vertical installation, min.-30 °C; < 0 °C as of FS04
vertical installation, max.50 °C
dew point, min.-60 °C; suitable for dry room applications
Width15 mm
Height73 mm
Depth58 mm
Weight, approx.32 g
IDEA4
UNSPSC15
otherEnvironment
last modified:3/10/2026
⬇ Descargar datasheet (PDF)

Ficha técnica oficial del fabricante con todas las especificaciones.

Material con posibilidad de devolución
ET 200SP, AI 2xI 2-/4-Wire ST, 1 un.
€188,24 EUR
€221,46 EUR
6ES7134-6GB00-0BA1
Plazo de entrega (días):
€188,24 EUR /cada
Total:

Accesorios