€76,70 EUR
+ IVA
Especificaciones técnicas
Protección y seguridad
| Isolation tested with | 3 100 V DC |
|---|---|
| Protection against fouling acc. to EN 60664-3 | Yes; Type 1 protection |
Datos eléctricos
| between backplane bus and supply voltage | Yes |
|---|---|
| between process terminals and supply voltage | Yes; Not applicable for process terminals 15 and 16 |
Conexión y cableado
| for process terminals | 120 V |
|---|---|
| For process terminals, max. | 10 A; Point of contact, derating depends on the module |
| Terminal type | Push-in terminal |
| Number of process terminals to I/O module | 16 |
| Number of terminals to AUX bus | 0 |
| Number of add-on terminals | 0 |
| Number of terminals with connection to P1 and P2 bus | 2 |
Condiciones ambientales
| Installation altitude above sea level, max. | 3 000 m |
|---|
Otras características
| Product type designation | BU type U0 |
|---|---|
| based on | 6ES7193-6BP00-0BU0 |
| Rated value (DC) | See manual |
| For P1 and P2 bus | 120 V |
| For AUX bus | 120 V; Equal potential group to P1/P2 bus or PE |
| Rated value (AC) | See manual |
| up to 60 °C, max. | 10 A |
| For P1 and P2 bus, max. | 10 A |
| For AUX bus, max. | 10 A |
| Automatic encoding | Yes |
| Potential group continued from the left | Yes |
| Number of slots | 1 |
| horizontal installation, min. | -40 °C; = Tmin (incl. condensation/frost) |
| horizontal installation, max. | 70 °C; = Tmax |
| vertical installation, min. | -40 °C; = Tmin |
| vertical installation, max. | 50 °C; = Tmax |
| 2-38, max. | conditions) |
| Resistant to commercially available coolants and | Yes; Incl. diesel and oil droplets in the air |
| 60721-3-3 | Class 3B3 on request |
| to EN 60721-3-3 | 0AA0) |
| 60721-3-6 | degree 3); * |
| to EN 60721-3-6 | 0AA0) |
| conditions acc. to EN 60721, EN 60654-4 and | during operation! |
| Military testing according to MIL-I-46058C, Amendment 7 | Yes; Discoloration of coating possible during service life |
| Qualification and Performance of Electrical Insulating | Yes; Conformal coating, Class A |
| Conductor cross-section, min. | 0.14 mm²; 0.2 mm² without wire end ferrule |
| Conductor cross-section, max. | 2.5 mm²; 1.5 mm² with wire end ferrule |
| Width | 20 mm |
| Height | 117 mm |
| Depth | 35 mm |
| Weight, approx. | 50 g |
| EMV | Maritime application |
| last modified: | 7/16/2025 |
Accesorios
-