SIPLUS ET 200SP RQ 4x24VDC/2A CO ST
Siemens

SIPLUS ET 200SP RQ 4x24VDC/2A CO ST

SIPLUS ET 200SP RQ 4 × 24 V DC/2 A CO ST basado en 6ES7132-6GD51-0BA0 con revestimiento conformado, –40…+70 °C, módulo de relés de señal, adecuado para BU tipo A0, código de color CC00, salida de valor sustitutivo, diagnóstico de módulo para: tensión de alimentación

Montaje y material
Color code for module-specific color-coded labelCC00
Condiciones ambientales
Installation altitude above sea level, max.5 000 m
Otras características
Product type designationRQ CO 4x24VDC/2A ST
Firmware versionV0.0
based on6ES7132-6GD51-0BA0
usable BaseUnitsBU type A0
I&M dataYes; I&M0 to I&M3
STEP 7 TIA Portal configurable/integrated from versionsee entry ID: 109746275
Redundancy capabilityYes
Rated value (DC)24 V
permissible range, lower limit (DC)19.2 V
permissible range, upper limit (DC)28.8 V
Reverse polarity protectionYes
Current consumption (rated value)50 mA
Power loss, typ.1.2 W
Inputs+ 1 byte for QI information
Outputs1 byte
Automatic encodingYes
Mechanical coding elementYes
Type of mechanical coding elementtype C
Type of digital outputRelays
Number of digital outputs4
Current-sinkingYes
Current-sourcingYes
Digital outputs, parameterizableYes
for logic linksYes
for redundant control of a loadYes
with resistive load, max.2 Hz
Current per channel, max.2A
Current per module, max.8A
up to 40 °C, max.8A
up to 50 °C, max.6A
up to 60 °C, max.4A
up to 30 °C, max.8A
Number of relay outputs4
Rated supply voltage of relay coil L+ (DC)24 V
Number of operating cycles, max.500 000
Thermal continuous current, max.2A
Switching current, min.1 mA; 5 V DC
Rated switching voltage (DC)24 V
Rated switching voltage (AC)24 V
shielded, max.1 000 m
unshielded, max.200 m
Diagnostics functionYes
Substitute values connectableYes
Diagnostic alarmYes
Monitoring the supply voltageYes
Monitoring of the supply voltage (PWR-LED)Yes; green PWR LED
Channel status displayYes; green LED
for module diagnosticsYes; green/red DIAG LED
between the channelsYes
between the channels and backplane busYes
between the channels and the power supply of theYes
Isolation tested with707 V DC (type test)
horizontal installation, min.-40 °C; = Tmin (incl. condensation/frost)
vertical installation, min.-40 °C; = Tmin
vertical installation, max.50 °C; = Tmax
With condensation, tested in accordance with IEC 60068100 %; incl. condensation / frost permitted (no commissioning under
2-38, max.condensation conditions)
Resistant to commercially available coolants andYes; Incl. diesel and oil droplets in the air
60721-3-3degree 3); *
to EN 60721-3-30AA0)
60721-3-6request
to EN 60721-3-60AA0)
conditions acc. to EN 60721, EN 60654-4 andduring operation!
Protection against fouling acc. to EN 60664-3Yes; Type 1 protection
Military testing according to MIL-I-46058C, Amendment 7Yes; Discoloration of coating possible during service life
Qualification and Performance of Electrical InsulatingYes; Conformal coating, Class A
Width15 mm
Height73 mm
Depth58 mm
Weight, approx.30 g
IDEA4
UNSPSC15
EMVMaritime application
last modified:10/23/2025

Ficha técnica oficial del fabricante con todas las especificaciones.

PDF Ficha técnica
Producto bajo pedido

Puedes pedirlo ya: te lo servimos en el plazo indicado. Selecciona la cantidad para añadirlo al carrito.

Plazo de entrega (días):
Avísame cuando haya stock

Si prefieres esperar a que vuelva a haber envío inmediato, déjanos tu email.

Solo usaremos tu email para avisarte de este artículo.

Avísame cuando esté disponible
SIPLUS ET 200SP RQ 4x24VDC/2A CO ST
SIPLUS ET 200SP RQ 4x24VDC/2A CO ST
€174,76 EUR
€194,18 EUR
6AG1132-6GD51-7BA0
Plazo de entrega (días):
€174,76 EUR /cada
Total:
Envío 24/48 h Material en stock Garantía y RMA Gestión de devoluciones Asesoramiento técnico Abre un ticket de soporte Distribuidor oficial Marcas líderes del sector

Accesorios