SIPLUS ET 200SP DQ 4X24..230VAC/2A HF

Name: SIPLUS ET 200SP DQ 4X24..230VAC/2A HF
Brand: Siemens S.A
SKU: 6AG1132-6FD00-7CU0
Price: 569.56 EUR
Availability: InStock

DescripciónEspecificacionesDescargasStock

SIPLUS ET 200SP DQ 4 × 24..230 V AC/2 A HF basado en 6ES7132-6FD00-0CU0 con revestimiento conformado, –40…+70 °C, módulo de salida digital, adecuado para BU tipo U0, código de color CC20, diagnóstico de canal dos modos de operación alternativos: DQ y control de potencia

Montaje y material

Color code for module-specific color-coded label	CC20

Condiciones ambientales

Installation altitude above sea level, max.	2 000 m
Ambient air temperature-barometric pressure-altitude	Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m)

Otras características

Product type designation	DQ 4x24 ... 230 V AC/2 A HF
FW update possible	Yes
based on	6ES7132-6FD00-0CU0
usable BaseUnits	BU type U0
I&M data	Yes; I&M0 to I&M3
STEP 7 TIA Portal configurable/integrated from version	see entry ID: 109746275
DQ with energy-saving function	Yes
Phase control	Yes; Control area: 8.5 ... 100% of the phase angle
Half-wave	Yes
Full-wave	Yes
Rated value (AC)	230 V; 47 ... 63 Hz, max. rate of change of frequency 1 mHz/s
permissible range, lower limit (AC)	20.4 V
permissible range, upper limit (AC)	264 V
Current consumption (rated value)	8 mA; without load
Inputs	+ 1 byte for QI information
Outputs	8 byte
Automatic encoding	Yes
Mechanical coding element	Yes
Type of mechanical coding element	type C
1-wire connection	BU type U0
2-wire connection	BU type U0
3-wire connection	BU type U0 + Potential distributor module
Type of digital output	Triac
Number of digital outputs	4
Current-sourcing	Yes
Digital outputs, parameterizable	Yes
Short-circuit protection	No; external fusing necessary
Open-circuit detection	Yes; channel by channel
Response threshold, typ.	1 mA; 40 V AC or more
Controlling a digital input	Yes
with resistive load, max.	2 A; Max. 4 A, see additional description in manual
with inductive load, max.	2A
for signal "1", min.	20.4 V
for signal "1" rated value	2A
for signal "1" permissible range, min.	10 mA
for signal "1" permissible range, max.	4 A; note derating data in the manual
for signal "0" residual current, max.	3 mA
"0" to "1", max.	40 ms; 2 AC cycles
"1" to "0", max.	20 ms; 1 AC cycle
for redundant control of a load	Yes
with inductive load (acc. to IEC 60947-5-1, AC15), max.	10 Hz; Applies to DQ mode; limited by line frequency in PC mode
on lamp load, max.	1 Hz; Applies to DQ mode; limited by line frequency in PC mode
Current per channel, max.	2 A; Max. 4 A, see additional description in manual
Current per module, max.	8A
up to 70 °C, max.	2 A; Applicable for current channels up to 2 A
up to 30 °C, max.	8A
up to 40 °C, max.	6A
up to 50 °C, max.	4A
shielded, max.	1 000 m
unshielded, max.	600 m
Diagnostics function	Yes
Substitute values connectable	Yes
Diagnostic alarm	Yes
Diagnostic information readable	Yes
Monitoring the supply voltage	Yes
Wire break	Yes; channel by channel
Group error	Yes
Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED
Channel status display	Yes; green LED
for channel diagnostics	Yes; red Fn LED
for module diagnostics	Yes; green/red DIAG LED
between the channels and backplane bus	Yes
Isolation tested with	2 545 V DC/2 s (routine test)
horizontal installation, min.	-40 °C; = Tmin (incl. condensation/frost)
horizontal installation, max.	70 °C; = Tmax
vertical installation, min.	-40 °C; = Tmin
vertical installation, max.	50 °C; = Tmax
2-38, max.	horizontal installation
Resistant to commercially available coolants and	Yes; Incl. diesel and oil droplets in the air
60721-3-3	Class 3B3 on request
to EN 60721-3-3	0AA0)
60721-3-6	degree 3); *
to EN 60721-3-6	0AA0)
conditions acc. to EN 60721, EN 60654-4 and	during operation!
Protection against fouling acc. to EN 60664-3	Yes; Type 1 protection
Military testing according to MIL-I-46058C, Amendment 7	Yes; Discoloration of coating possible during service life
Qualification and Performance of Electrical Insulating	Yes; Conformal coating, Class A
Width	20 mm
Height	73 mm
Depth	58 mm
Weight, approx.	50 g
IDEA	4
UNSPSC	15
EMV	Maritime application
last modified:	7/9/2025

Ficha técnica oficial del fabricante con todas las especificaciones.

PDF Ficha técnica

Producto bajo pedido

Puedes pedirlo ya: te lo servimos en el plazo indicado. Selecciona la cantidad para añadirlo al carrito.

Plazo de entrega (días):

Avísame cuando haya stock

Si prefieres esperar a que vuelva a haber envío inmediato, déjanos tu email.

Solo usaremos tu email para avisarte de este artículo.

SIPLUS ET 200SP DQ 4X24..230VAC/2A HF

Ahorra 10%

6AG1132-6FD00-7CU0

€569,56 EUR

~~€632,84 EUR~~

6AG1132-6FD00-7CU0

Plazo de entrega (días):

€569,56 EUR /cada

Plazo de entrega (días):

€569,56 EUR /cada

Total:

Total: €0,00 EUR

en el carrito Total: