SIPLUS ET 200SP DQ 8x24VDC/0,5A ST
Siemens

SIPLUS ET 200SP DQ 8x24VDC/0,5A ST

SIPLUS ET 200SP DQ 8 × 24 V DC/0,5 A estándar basado en 6ES7132-6BF01-0BA0 con revestimiento conformado, –40…+70 °C, módulo de salida digital, adecuado para BU tipo A0, código de color CC02, diagnóstico de canal

Montaje y material
Color code for module-specific color-coded labelCC02
Condiciones ambientales
Installation altitude above sea level, max.5 000 m
Certificados y homologaciones
China RoHSCCC-Ex
Otras características
Product type designationDQ 8x24VDC/0,5A ST
based on6ES7132-6BF01-0BA0
usable BaseUnitsBU type A0
I&M dataYes; I&M0 to I&M3
STEP 7 TIA Portal configurable/integrated from versionsee entry ID: 109746275
Rated value (DC)24 V
permissible range, lower limit (DC)19.2 V
permissible range, upper limit (DC)28.8 V
Reverse polarity protectionYes
Current consumption, max.35 mA; without load
Power loss, typ.1W
Address space per module, max.1 byte; + 1 byte for QI information
Automatic encodingYes
Mechanical coding elementYes
Type of mechanical coding elementType A
1-wire connectionBU type A0
2-wire connectionBU type A0
3-wire connectionBU type A0 with AUX terminals or potential distributor module
4-wire connectionBU type A0 + Potential distributor module
Type of digital outputSource output (PNP, current-sourcing)
Number of digital outputs8
Current-sourcingYes
Digital outputs, parameterizableYes
output type acc. to IEC 61131, type 0.5Yes
Short-circuit protectionYes; Electronic
Response threshold, typ.1 A; 0.7 to 1.3 A
Open-circuit detectionYes
Limitation of inductive shutdown voltage toTyp. L+ (-50 V)
Controlling a digital inputYes
with resistive load, max.0.5 A
with inductive load, max.0.5 A
on lamp load, max.5W
lower limit48 Ω
upper limit12 kΩ
for signal "1" rated value0.5 A
for signal "1" permissible range, max.0.5 A
for signal "0" residual current, max.0.1 mA
"0" to "1", max.50 µs; at rated load
"1" to "0", max.100 µs; at rated load
for redundant control of a loadYes
Current per channel, max.0.5 A
Current per module, max.4A
up to 60 °C, max.4A
up to 50 °C, max.4A
shielded, max.1 000 m
unshielded, max.600 m
Diagnostics functionYes
Substitute values connectableYes
Diagnostic alarmYes
Monitoring the supply voltageYes
Wire breakYes; module-wise
Short-circuit to groundYes; module-wise
Short-circuit to L+Yes; module-wise
Monitoring of the supply voltage (PWR-LED)Yes; green PWR LED
Channel status displayYes; green LED
for module diagnosticsYes; green/red DIAG LED
between the channels and backplane busYes
Isolation tested with707 V DC (type test)
horizontal installation, min.-40 °C; = Tmin (incl. condensation/frost)
horizontal installation, max.70 °C; = Tmax; > +60 °C max. total current 1.0 A
vertical installation, min.-40 °C; = Tmin
vertical installation, max.50 °C; = Tmax
With condensation, tested in accordance with IEC 60068100 %; incl. condensation / frost permitted (no commissioning under
2-38, max.condensation conditions)
Resistant to commercially available coolants andYes; Incl. diesel and oil droplets in the air
60721-3-3Class 3B3 on request
to EN 60721-3-30AA0)
60721-3-6request
to EN 60721-3-60AA0)
conditions acc. to EN 60721, EN 60654-4 andduring operation!
Protection against fouling acc. to EN 60664-3Yes; Type 1 protection
Military testing according to MIL-I-46058C, Amendment 7Yes; Discoloration of coating possible during service life
Qualification and Performance of Electrical InsulatingYes; Conformal coating, Class A
Width15 mm
Height73 mm
Depth58 mm
Weight, approx.30 g
IDEA4
UNSPSC15
EMVFor use in hazardous locations
last modified:3/10/2026

Ficha técnica oficial del fabricante con todas las especificaciones.

PDF Ficha técnica
Producto bajo pedido

Puedes pedirlo ya: te lo servimos en el plazo indicado. Selecciona la cantidad para añadirlo al carrito. Si prefieres esperar a que vuelva a haber stock inmediato, déjanos tu email abajo.

Plazo de entrega (días):

Este artículo va bajo pedido.

Avísame cuando esté disponible

Solo usaremos tu email para avisarte de este artículo.
SIPLUS ET 200SP DQ 8x24VDC/0,5A ST
SIPLUS ET 200SP DQ 8x24VDC/0,5A ST
€163,45 EUR
€181,61 EUR
6AG1132-6BF01-7BA0
Plazo de entrega (días):
€163,45 EUR /cada
Total:
Envío 24/48 h Material en stock Garantía y RMA Gestión de devoluciones Asesoramiento técnico Abre un ticket de soporte Distribuidor oficial Marcas líderes del sector

Accesorios