ET 200SP, DI 8x24VDC HF, emb. 10
Siemens

ET 200SP, DI 8x24VDC HF, emb. 10

SIMATIC ET 200SP, digital input module, DI 8x 24VDC High Feature, input type 3 (IEC 61131), Sink input (PNP, active high), packaging unit: 10 pieces, suitable for BU type, A0, color code CC01, input delay: 0,05..20ms, channel diagnosis for: short circuit of sensor supply, wire break, power supply, channel failure LED

🔌 ComunicaciónGSDML V2.3
Datos eléctricos
Pulse extensionYes; Pulse duration from 4 µs
Entradas/Salidas y comunicación
PROFIBUS from GSD version/GSD revisionOne GSD file each, Revision 3 and 5 and higher
PROFINET from GSD version/GSD revisionGSDML V2.3
Montaje y material
Color code for module-specific color-coded labelCC01
Condiciones ambientales
Installation altitude above sea level, max.5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Otras características
Product type designationDI 8x24 V DC HF
HW functional statusFrom FS07
FW update possibleYes
usable BaseUnitsBU type A0
I&M dataYes; I&M0 to I&M3
Isochronous modeYes
STEP 7 TIA Portal configurable/integrated from versionV13 SP1 / -
STEP 7 configurable/integrated from versionV5.5 / -
PCS 7 configurable/integrated from versionV8.1 SP1
PCS neo can be configured/integrated from versionfrom V1.0.0
MSIYes
Rated value (DC)24 V
permissible range, lower limit (DC)19.2 V
permissible range, upper limit (DC)28.8 V
Reverse polarity protectionYes
Current consumption (rated value)20 mA
Current consumption, max.39 mA
Number of outputs8
Output voltage, min.19.2 V
Short-circuit protectionYes
24 VYes
Output current per channel, max.700 mA
Output current per module, max.700 mA
Power loss, typ.1.5 W; 24 V, 8 inputs supplied via encoder supply
Inputs1 byte; + 1 byte for QI information
Automatic encodingYes
Mechanical coding elementYes
Type of mechanical coding elementType A
Number of configurable submodules, max.4
1-wire connectionBU type A0
2-wire connectionBU type A0
3-wire connectionBU type A0 with AUX terminals or potential distributor module
4-wire connectionBU type A0 + Potential distributor module
Number of digital inputs8
Digital inputs, parameterizableYes
Sourcing/sinking inputP-reading
Length2 s; 50 ms, 100 ms, 200 ms, 500 ms, 1 s, 2 s
Edge evaluationYes; rising edge, falling edge, edge change
for signal "0"-30 to +5 V
for signal "1"+11 to +30V
for signal "1", typ.2.5 mA
at "0" to "1", min.0.05 ms
at "0" to "1", max.20 ms
at "1" to "0", min.0.05 ms
at "1" to "0", max.20 ms
shielded, max.1 000 m
unshielded, max.600 m
2-wire sensorYes
permissible quiescent current (2-wire sensor), max.1.5 mA
Filtering and processing time (TCI), min.420 µs
Bus cycle time (TDP), min.500 µs
Jitter, max.8 µs
Diagnostics functionYes
Diagnostic alarmYes; channel by channel
Hardware interruptYes; Parameterizable, channels 0 to 7
Diagnostic information readableYes
Monitoring the supply voltageYes
ParameterizableYes
Monitoring of encoder power supplyYes; channel by channel
short-circuitYes; channel by channel
Monitoring of the supply voltage (PWR-LED)Yes; green PWR LED
Channel status displayYes; green LED
for channel diagnosticsYes; red LED
for module diagnosticsYes; green/red DIAG LED
between the channels and backplane busYes
Isolation tested with707 V DC (type test)
horizontal installation, min.-30 °C; < 0 °C as of FS07
horizontal installation, max.60 °C
vertical installation, min.-30 °C; < 0 °C as of FS07
vertical installation, max.50 °C
Width15 mm
Height73 mm
Depth58 mm
Weight, approx.28 g
IDEA4
UNSPSC15
otherEnvironment
last modified:10/23/2025
⬇ Descargar datasheet (PDF)

Ficha técnica oficial del fabricante con todas las especificaciones.

Material con posibilidad de devolución
ET 200SP, DI 8x24VDC HF, emb. 10
ET 200SP, DI 8x24VDC HF, emb. 10
€75,55 EUR
€88,88 EUR
6ES7131-6BF00-2CA0
Plazo de entrega (días):
€75,55 EUR /each
Total:
Envío 24/48 h Material en stock Garantía y RMA Gestión de devoluciones Asesoramiento técnico Abre un ticket de soporte Distribuidor oficial Marcas líderes del sector

Accesorios