SIPLUS ET 200SP AQ 2xU/I HF
Siemens

SIPLUS ET 200SP AQ 2xU/I HF

SIPLUS ET 200SP AQ 2 × U/I HF basado en 6ES7135-6HB00-0CA1 con revestimiento conformado, –40…+70 °C, módulo de salida analógico, adecuado para BU tipo A0, A1, código de color CC00, diagnóstico de canal, 16 bits, +/– 0,1%

Montaje y material
Color code for module-specific color-coded labelCC00
Condiciones ambientales
Installation altitude above sea level, max.5 000 m
Certificados y homologaciones
China RoHSCCC-Ex
Otras características
Product type designationAQ 2xU/I HF
FW update possibleYes
based on6ES7135-6HB00-0CA1
usable BaseUnitsBU type A0, A1
I&M dataYes; I&M0 to I&M3
Isochronous modeYes; 250 µs
STEP 7 TIA Portal configurable/integrated from versionsee entry ID: 109746275
Rated value (DC)24 V
permissible range, lower limit (DC)19.2 V
permissible range, upper limit (DC)28.8 V
Reverse polarity protectionYes
Current consumption (rated value)45 mA; without load
Current consumption, max.90 mA; 2 channels current output 20 mA
Power loss, typ.0.9 W
Address space per module, max.4 byte; + 1 byte for QI information
Automatic encodingYes
Mechanical coding elementYes
Type of mechanical coding elementType A
Number of analog outputs2
Voltage output, short-circuit protectionYes
Voltage output, short-circuit current, max.45 mA
Cycle time (all channels), min.750 µs
0 to 10 VYes; 15 bit
1 V to 5 VYes; 13 bit
5 V to +5 VYes; 15 bit incl. sign
10 V to +10 VYes; 16 bit incl. sign
0 to 20 mAYes; 15 bit
20 mA to +20 mAYes; 16 bit incl. sign
4 mA to 20 mAYes; 14 bit
for voltage output two-wire connectionYes
for voltage output four-wire connectionYes
for current output two-wire connectionYes
with voltage outputs, min.2 kΩ
with voltage outputs, capacitive load, max.1 µF
with current outputs, max.500 Ω
with current outputs, inductive load, max.1 mH
Voltages at the outputs30 V
shielded, max.1 000 m; 200 m for voltage output
Resolution with overrange (bit including sign), max.16 bit
for resistive load0.05 ms
for capacitive load0.05 ms; Max. 47 nF and 20 m cable length
for inductive load0.05 ms
Linearity error (relative to output range), (+/-)0.03 %
Temperature error (relative to output range), (+/-)0.003 %/K
Crosstalk between the outputs, max.-50 dB
Voltage, relative to output range, (+/-)0.4 %
Current, relative to output range, (+/-)0.4 %
Execution and activation time (TCO), min.500 µs
Bus cycle time (TDP), min.750 µs
Jitter, max.5 µs
Diagnostics functionYes
Substitute values connectableYes
Diagnostic alarmYes
Monitoring the supply voltageYes
Wire breakYes; channel-by-channel, only for output type "current"
short-circuitYes; channel-by-channel, only for output type "voltage"
Group errorYes
Overflow/UnderflowYes; channel by channel
Monitoring of the supply voltage (PWR-LED)Yes; green PWR LED
Channel status displayYes; green LED
for channel diagnosticsYes; red LED
for module diagnosticsYes; green/red DIAG LED
between the channels and backplane busYes
between the channels and the power supply of theYes
Isolation tested with707 V DC (type test)
horizontal installation, min.-40 °C; = Tmin (incl. condensation/frost)
horizontal installation, max.70 °C; = Tmax
vertical installation, min.-40 °C; = Tmin
vertical installation, max.50 °C; = Tmax
2-38, max.horizontal installation
Resistant to commercially available coolants andYes; Incl. diesel and oil droplets in the air
60721-3-3Class 3B3 on request
to EN 60721-3-30AA0)
60721-3-6request
to EN 60721-3-60AA0)
conditions acc. to EN 60721, EN 60654-4 andduring operation!
Protection against fouling acc. to EN 60664-3Yes; Type 1 protection
Military testing according to MIL-I-46058C, Amendment 7Yes; Discoloration of coating possible during service life
Qualification and Performance of Electrical InsulatingYes; Conformal coating, Class A
Width15 mm
Height73 mm
Depth58 mm
Weight, approx.31 g
IDEA4
UNSPSC15
EMVFor use in hazardous locations
last modified:10/23/2025

Ficha técnica oficial del fabricante con todas las especificaciones.

PDF Ficha técnica
Producto bajo pedido

Puedes pedirlo ya: te lo servimos en el plazo indicado. Selecciona la cantidad para añadirlo al carrito.

Plazo de entrega (días):
Avísame cuando haya stock

Si prefieres esperar a que vuelva a haber envío inmediato, déjanos tu email.

Solo usaremos tu email para avisarte de este artículo.

Avísame cuando esté disponible
SIPLUS ET 200SP AQ 2xU/I HF
SIPLUS ET 200SP AQ 2xU/I HF
€467,71 EUR
€519,68 EUR
6AG1135-6HB00-7CA1
Plazo de entrega (días):
€467,71 EUR /each
Total:
Envío 24/48 h Material en stock Garantía y RMA Gestión de devoluciones Asesoramiento técnico Abre un ticket de soporte Distribuidor oficial Marcas líderes del sector

Accesorios