€658,83 EUR
+ VAT
Especificaciones técnicas
Protección y seguridad
| Reverse polarity protection | Yes |
|---|---|
| Short-circuit protection | Yes |
| Isolation tested with | 707 V DC (type test) |
| Protection against fouling acc. to EN 60664-3 | Yes; Type 1 protection |
Datos eléctricos
| Current consumption (rated value) | 39 mA; without sensor supply |
|---|---|
| Output current, max. | 20 mA; max. 50 mA per channel for a duration < 10 s |
| Power loss, typ. | 0.95 W; without sensor supply |
| For current measurement | 2 |
| For voltage measurement | 2 |
| permissible input voltage for voltage input (destruction limit), | 30 V |
| permissible input current for current input (destruction limit), | 50 mA |
| for voltage measurement | Yes |
| for current measurement as 2-wire transducer | Yes |
| for current measurement as 4-wire transducer | Yes |
| Voltage, relative to input range, (+/-) | 0.5 % |
| Current, relative to input range, (+/-) | 0.5 % |
| Common mode voltage, max. | 35 V |
| Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
| between the channels and the power supply of the | Yes |
Montaje y material
| Color code for module-specific color-coded label | CC00 |
|---|
Condiciones ambientales
| Installation altitude above sea level, max. | 5 000 m |
|---|
Certificados y homologaciones
| China RoHS | CCC-Ex |
|---|
Otras características
| Product type designation | AI 2xU/I 2-/4-wire HS |
|---|---|
| FW update possible | Yes |
| based on | 6ES7134-6HB00-0DA1 |
| usable BaseUnits | BU type A0, A1 |
| I&M data | Yes; I&M0 to I&M3 |
| Isochronous mode | Yes; 125 µs |
| STEP 7 TIA Portal configurable/integrated from version | see entry ID: 109746275 |
| Oversampling | Yes; 2 channels per module |
| Reparameterization possible in RUN | Yes |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| 24 V | Yes; For current measurement |
| Automatic encoding | Yes |
| Mechanical coding element | Yes |
| Type of mechanical coding element | Type A |
| 2-wire connection | BU type A0, A1 |
| 4-wire connection | BU type A0, A1 |
| Number of analog inputs | 2; Differential inputs |
| Cycle time (all channels), min. | 125 µs |
| Analog input with oversampling | Yes |
| Values per cycle, max. | 16 |
| Resolution, min. | 50 µs |
| 0 to +10 V | Yes; 15 bit |
| Input resistance (0 to 10 V) | 75 kΩ |
| 1 V to 5 V | Yes; 13 bit |
| Input resistance (1 V to 5 V) | 75 kΩ |
| 10 V to +10 V | Yes; 16 bit incl. sign |
| Input resistance (-10 V to +10 V) | 75 kΩ |
| 5 V to +5 V | Yes; 15 bit incl. sign |
| Input resistance (-5 V to +5 V) | 75 kΩ |
| 0 to 20 mA | Yes; 15 bit |
| Input resistance (0 to 20 mA) | 130 Ω |
| 20 mA to +20 mA | Yes; 16 bit incl. sign |
| Input resistance (-20 mA to +20 mA) | 130 Ω |
| 4 mA to 20 mA | Yes; 14 bit |
| Input resistance (4 mA to 20 mA) | 130 Ω |
| shielded, max. | 1 000 m; 200 m for voltage measurement |
| Measurement principle | Actual value encryption (successive approximation) |
| Resolution with overrange (bit including sign), max. | 16 bit |
| Conversion time (per channel) | 10 µs |
| Number of smoothing levels | 7; none; 2-/4-/8-/16-/32-/64-fold |
| Parameterizable | Yes |
| Burden of 2-wire transmitter, max. | 650 Ω |
| Linearity error (relative to input range), (+/-) | 0.03 % |
| Temperature error (relative to input range), (+/-) | 0.01 %/K |
| Crosstalk between the inputs, min. | -50 dB |
| Common mode interference, min. | 90 dB |
| Filtering and processing time (TCI), min. | 80 µs |
| Bus cycle time (TDP), min. | 125 µs; Starting from firmware Version V2.0.1 |
| Diagnostic alarm | Yes |
| Limit value alarm | Yes; two upper and two lower limit values in each case |
| Wire break | Yes; channel-by-channel, at 4 to 20 mA only |
| Group error | Yes |
| Overflow/Underflow | Yes; channel by channel |
| Channel status display | Yes; green LED |
| for channel diagnostics | Yes; red LED |
| for module diagnostics | Yes; green/red DIAG LED |
| between the channels | Yes |
| between the channels and backplane bus | Yes |
| horizontal installation, min. | -40 °C; = Tmin (incl. condensation/frost) |
| horizontal installation, max. | 60 °C; = Tmax; +70 °C with spacing modules (6AG1193-6BN00-7BA0) or |
| vertical installation, min. | -40 °C; = Tmin |
| vertical installation, max. | 50 °C; = Tmax |
| 2-38, max. | horizontal installation |
| Resistant to commercially available coolants and | Yes; Incl. diesel and oil droplets in the air |
| 60721-3-3 | Class 3B3 on request |
| to EN 60721-3-3 | 0AA0) |
| 60721-3-6 | request |
| to EN 60721-3-6 | 0AA0) |
| conditions acc. to EN 60721, EN 60654-4 and | during operation! |
| Military testing according to MIL-I-46058C, Amendment 7 | Yes; Discoloration of coating possible during service life |
| Qualification and Performance of Electrical Insulating | Yes; Conformal coating, Class A |
| Width | 15 mm |
| Height | 73 mm |
| Depth | 58 mm |
| Weight, approx. | 32 g |
| EMV | For use in hazardous locations |
| last modified: | 10/23/2025 |
Accesorios
-