SIPLUS ET 200SP AI 2 X U/I 2-, 4-WIRE HS
Siemens

SIPLUS ET 200SP AI 2 X U/I 2-, 4-WIRE HS

SIPLUS ET 200SP AI 2 × U/I 2/ 4 hilos HS basado en 6ES7134-6HB00-0DA1 con revestimiento conformado, –40…+60 °C, módulo de entrada analógica, adecuado para BU tipo A0, A1, código de color CC00, diagnóstico de canal, 16 bits, +/– 0,3 %

Montaje y material
Color code for module-specific color-coded labelCC00
Condiciones ambientales
Installation altitude above sea level, max.5 000 m
Certificados y homologaciones
China RoHSCCC-Ex
Otras características
Product type designationAI 2xU/I 2-/4-wire HS
FW update possibleYes
based on6ES7134-6HB00-0DA1
usable BaseUnitsBU type A0, A1
I&M dataYes; I&M0 to I&M3
Isochronous modeYes; 125 µs
STEP 7 TIA Portal configurable/integrated from versionsee entry ID: 109746275
OversamplingYes; 2 channels per module
Reparameterization possible in RUNYes
Rated value (DC)24 V
permissible range, lower limit (DC)19.2 V
permissible range, upper limit (DC)28.8 V
Reverse polarity protectionYes
Current consumption (rated value)39 mA; without sensor supply
24 VYes; For current measurement
Short-circuit protectionYes
Output current, max.20 mA; max. 50 mA per channel for a duration < 10 s
Power loss, typ.0.95 W; without sensor supply
Automatic encodingYes
Mechanical coding elementYes
Type of mechanical coding elementType A
2-wire connectionBU type A0, A1
4-wire connectionBU type A0, A1
Number of analog inputs2; Differential inputs
For current measurement2
For voltage measurement2
Cycle time (all channels), min.125 µs
Analog input with oversamplingYes
Values per cycle, max.16
Resolution, min.50 µs
0 to +10 VYes; 15 bit
Input resistance (0 to 10 V)75 kΩ
1 V to 5 VYes; 13 bit
Input resistance (1 V to 5 V)75 kΩ
10 V to +10 VYes; 16 bit incl. sign
Input resistance (-10 V to +10 V)75 kΩ
5 V to +5 VYes; 15 bit incl. sign
Input resistance (-5 V to +5 V)75 kΩ
0 to 20 mAYes; 15 bit
Input resistance (0 to 20 mA)130 Ω
20 mA to +20 mAYes; 16 bit incl. sign
Input resistance (-20 mA to +20 mA)130 Ω
4 mA to 20 mAYes; 14 bit
Input resistance (4 mA to 20 mA)130 Ω
shielded, max.1 000 m; 200 m for voltage measurement
Measurement principleActual value encryption (successive approximation)
Resolution with overrange (bit including sign), max.16 bit
Conversion time (per channel)10 µs
Number of smoothing levels7; none; 2-/4-/8-/16-/32-/64-fold
ParameterizableYes
for voltage measurementYes
for current measurement as 2-wire transducerYes
Burden of 2-wire transmitter, max.650 Ω
for current measurement as 4-wire transducerYes
Linearity error (relative to input range), (+/-)0.03 %
Temperature error (relative to input range), (+/-)0.01 %/K
Crosstalk between the inputs, min.-50 dB
Voltage, relative to input range, (+/-)0.5 %
Current, relative to input range, (+/-)0.5 %
Common mode voltage, max.35 V
Common mode interference, min.90 dB
Filtering and processing time (TCI), min.80 µs
Bus cycle time (TDP), min.125 µs; Starting from firmware Version V2.0.1
Diagnostic alarmYes
Limit value alarmYes; two upper and two lower limit values in each case
Wire breakYes; channel-by-channel, at 4 to 20 mA only
Group errorYes
Overflow/UnderflowYes; channel by channel
Monitoring of the supply voltage (PWR-LED)Yes; green PWR LED
Channel status displayYes; green LED
for channel diagnosticsYes; red LED
for module diagnosticsYes; green/red DIAG LED
between the channelsYes
between the channels and backplane busYes
between the channels and the power supply of theYes
Isolation tested with707 V DC (type test)
horizontal installation, min.-40 °C; = Tmin (incl. condensation/frost)
horizontal installation, max.60 °C; = Tmax; +70 °C with spacing modules (6AG1193-6BN00-7BA0) or
vertical installation, min.-40 °C; = Tmin
vertical installation, max.50 °C; = Tmax
2-38, max.horizontal installation
Resistant to commercially available coolants andYes; Incl. diesel and oil droplets in the air
60721-3-3Class 3B3 on request
to EN 60721-3-30AA0)
60721-3-6request
to EN 60721-3-60AA0)
conditions acc. to EN 60721, EN 60654-4 andduring operation!
Protection against fouling acc. to EN 60664-3Yes; Type 1 protection
Military testing according to MIL-I-46058C, Amendment 7Yes; Discoloration of coating possible during service life
Qualification and Performance of Electrical InsulatingYes; Conformal coating, Class A
Width15 mm
Height73 mm
Depth58 mm
Weight, approx.32 g
IDEA4
UNSPSC15
EMVFor use in hazardous locations
last modified:10/23/2025

Ficha técnica oficial del fabricante con todas las especificaciones.

PDF Ficha técnica
Producto bajo pedido

Puedes pedirlo ya: te lo servimos en el plazo indicado. Selecciona la cantidad para añadirlo al carrito. Si prefieres esperar a que vuelva a haber stock inmediato, déjanos tu email abajo.

Plazo de entrega (días):

Este artículo va bajo pedido.

Avísame cuando esté disponible

Solo usaremos tu email para avisarte de este artículo.
SIPLUS ET 200SP AI 2 X U/I 2-, 4-WIRE HS
SIPLUS ET 200SP AI 2 X U/I 2-, 4-WIRE HS
€658,83 EUR
€732,03 EUR
6AG1134-6HB00-2DA1
Plazo de entrega (días):
€658,83 EUR /each
Total:
Envío 24/48 h Material en stock Garantía y RMA Gestión de devoluciones Asesoramiento técnico Abre un ticket de soporte Distribuidor oficial Marcas líderes del sector

Accesorios