€374,01 EUR
+ VAT
Especificaciones técnicas
Protección y seguridad
| Reverse polarity protection | Yes; against destruction |
|---|---|
| Short-circuit protection | Yes |
| short-circuit | Yes |
| Isolation tested with | 707 V DC (type test) |
Datos eléctricos
| Current consumption, max. | 50 mA; without load |
|---|---|
| Output current, max. | 500 mA; Observe derating |
| Power loss, typ. | 1.5 W |
| Type of input voltage | DC |
| permissible voltage at input, min. | -30 V; -5 V continuous, -30 V brief reverse polarity protection |
| permissible voltage at input, max. | 30 V |
| Current-sinking | Yes; With High Speed output |
| Current-sourcing | Yes |
| Limitation of inductive shutdown voltage to | -0.8 V |
| Type of output voltage | DC |
| for signal "1" minimum load current | 2 mA |
| for signal "0" residual current, max. | 0.5 mA |
| Current per module, max. | 3.5 A; Observe derating |
| permissible quiescent current (2-wire sensor), max. | 1.5 mA |
| Input voltage | 24 V |
| Monitoring the supply voltage | Yes |
| Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
Entradas/Salidas y comunicación
| Number of RS 485 interfaces | 0 |
|---|
Detección y sensórica
| Counter for incremental encoder | Yes |
|---|---|
| Incremental encoder (asymmetrical) | Yes |
| 2-wire sensor | Yes |
| Incremental encoder with A/B tracks, 90° phase offset | Yes |
| pulse encoder | Yes |
Certificados y homologaciones
| China RoHS | FM |
|---|
Otras características
| Product type designation | TM Timer DIDQ 10x24V |
|---|---|
| HW functional status | From FS03 |
| usable BaseUnits | BU type A0 |
| I&M data | Yes; I&M 0 |
| Isochronous mode | Yes |
| STEP 7 TIA Portal configurable/integrated from version | V13 Update 3 |
| STEP 7 configurable/integrated from version | V5.5 SP3 / - |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| Number of outputs | 1 |
| 24 V | Yes; L+ (-0.8 V) |
| Inputs | 26 byte |
| Outputs | 32 byte |
| Automatic encoding | Yes |
| Mechanical coding element | Yes |
| Type of mechanical coding element | type B |
| Number of digital inputs | 4 |
| Digital inputs, parameterizable | Yes |
| Digital input with time stamp | Yes |
| Number, max. | 4 |
| Counter | Yes |
| Digital input with oversampling | Yes |
| HW enable for digital input | Yes |
| HW enable for digital output | Yes |
| for signal "0" | -5 ... +5 V |
| for signal "1" | +11 to +30V |
| for signal "1", typ. | 2.5 mA |
| Minimum pulse width for program reactions | 3 µs; for parameterization "none" |
| parameterizable | Yes; none / 0.05 / 0.1 / 0.4 / 0.8 ms |
| shielded, max. | 1 000 m; Depending on sensor, cable quality and rate of change |
| unshielded, max. | 600 m; Depending on sensor, cable quality and rate of change |
| Type of digital output | Transistor |
| Number of digital outputs | 6 |
| Digital outputs, parameterizable | Yes |
| Response threshold, typ. | 1.7 A with Standard output, 0.5 A with High Speed output |
| Digital output with time stamp | Yes |
| PWM output | Yes |
| Digital output with oversampling | Yes |
| lower limit | 48 Ω; 240 ohm with High Speed output |
| upper limit | 12 kΩ |
| for signal "0", max. | 1 V; With High Speed output |
| for signal "1", min. | 23.2 V; L+ (-0.8 V) |
| for signal "1" rated value | 0.5 A; 0.1 A with High Speed output, observe derating |
| for signal "1" permissible range, max. | 0.6 A; 0.12 A with High Speed output, observe derating |
| "0" to "1", max. | 1 µs; With High Speed output, 5 µs with Standard output |
| "1" to "0", max. | 1 µs; With High Speed output, 6 µs with Standard output |
| 24 V initiator | Yes |
| Input frequency, max. | 50 kHz |
| Counting frequency, max. | 200 kHz; with quadruple evaluation |
| Bus cycle time (TDP), min. | 375 µs |
| Jitter, max. | 1 µs |
| Diagnostics function | Yes |
| Substitute values connectable | Yes |
| Diagnostic alarm | Yes |
| Channel status display | Yes |
| for module diagnostics | Yes; green/red DIAG LED |
| Number of counters | 3 |
| Continuous counting | Yes |
| between the channels and backplane bus | Yes |
| horizontal installation, min. | -30 °C |
| horizontal installation, max. | 60 °C; Observe derating |
| vertical installation, min. | -30 °C |
| vertical installation, max. | 50 °C; Observe derating |
| dew point, min. | -60 °C; suitable for dry room applications |
| to SIMATIC S7-1500 | Yes |
| Width | 15 mm |
| Height | 73 mm |
| Depth | 58 mm |
| Weight, approx. | 45 g |
| last modified: | 7/3/2026 |
Accesorios
-