ET 200SP, CM 4 X IO-Link ST

DescripciónEspecificacionesDescargasStock

SIMATIC ET 200SP, CM 4 x IO-Link ST módulo de comunicación Maestro IO-Link V1.1

ComunicaciónYes

Entradas/Salidas y comunicación

PROFIBUS from GSD version/GSD revision	One GSD file each, Revision 3 and 5 and higher
PROFINET from GSD version/GSD revision	GSDML V2.3
IO-Link	Yes
IO-Link protocol 1.0	Yes
IO-Link protocol 1.1	Yes

Conexión y cableado

Cable length unshielded, max.	20 m

Montaje y material

Color code for module-specific color-coded label	CC04

Condiciones ambientales

Installation altitude above sea level, max.	2 000 m; On request: Installation altitudes greater than 2 000 m

Certificados y homologaciones

China RoHS	CCC-Ex
Type Examination Cer	Miscellaneous

Otras características

Product type designation	CM 4 x IO-Link ST
HW functional status	FS20
Firmware version	V2.2.2
FW update possible	Yes
usable BaseUnits	BU type A0
I&M data	Yes; I&M0 to I&M3
STEP 7 TIA Portal configurable/integrated from version	STEP 7 V15 or higher
STEP 7 configurable/integrated from version	STEP 7 V5.5 or higher
Rated value (DC)	24 V
permissible range, lower limit (DC)	20.4 V
permissible range, upper limit (DC)	28.8 V
Current consumption, max.	45 mA; without load
Number of outputs	4
Rated value	700 mA; Per channel
Short-circuit protection	Yes
Output current, max.	2.1 A
Power loss, typ.	1W
Automatic encoding	Yes
Electronic coding element type H	Yes
unshielded, max.	20 m; Also applies for shielded cables
Number of ports	4
of which simultaneously controllable	4
Transmission rate	4.8 kBaud (COM1); 38.4 kBaud (COM2), 230.4 kBaud (COM3)
Cycle time, min.	2 ms; dynamic, depending on user data length
Size of process data, input per port	32 byte; max.
Size of process data, input per module	144 byte; max.
Size of process data, output per port	32 byte; max.
Size of process data, output per module	128 byte; max.
Memory size for device parameter	2 kbyte; for each port
Master backup	Yes
Configuration without S7-PCT	Yes
Port type A	Yes
Port type B	Yes; 24 V DC via external terminal
via three-wire connection	Yes
Diagnostic alarm	Yes; The port diagnosis is available in the IO-Link mode only.
Monitoring the supply voltage	Yes
Wire break	Yes
Short-circuit	Yes
Group error	Yes
Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED
for channel diagnostics	Yes; red Fn LED
for module diagnostics	Yes; green/red DIAG LED
between the channels and backplane bus	Yes
Isolation tested with	707 V DC (type test)
horizontal installation, min.	-30 °C
horizontal installation, max.	60 °C
vertical installation, min.	-30 °C
vertical installation, max.	50 °C
Width	15 mm
Height	73 mm
Depth	58 mm
Weight, approx.	30 g
IDEA	4
UNSPSC	15
For use in hazardous locations	Maritime application
NK / Nippon Kaiji Ky	CCS (China Classifica-
okai	tion Society)
last modified:	4/13/2026

Ficha técnica oficial del fabricante con todas las especificaciones.

Producto en stock

Selecciona la cantidad y verás el plazo de entrega según el stock disponible. Si pides más unidades de las que hay en stock, podemos avisarte cuando tengamos toda la cantidad lista para envío inmediato.

Plazo de entrega (días):

Pides más unidades de las que hay en stock inmediato.

ET 200SP, CM 4 X IO-Link ST

Save 15%

6ES7137-6BD00-0BA0

€293,51 EUR

~~€345,31 EUR~~

6ES7137-6BD00-0BA0

Plazo de entrega (días):

€293,51 EUR /each

Plazo de entrega (días):

€293,51 EUR /each

Total:

Total: €0,00 EUR

in cart Total: