Especificaciones técnicas
Generalidades
| 4-wire multipoint connection | Yes |
|---|
Protección y seguridad
| Reverse polarity protection | Yes |
|---|---|
| Isolation tested with | 750 V DC (type test) and according to EN 50155 (routine test) |
| Fire protection acc. to EN 45545-2 | Yes; For proof of conformity, see Service & Support |
| Protection against fouling acc. to EN 60664-3 | Yes; Type 1 protection |
Datos eléctricos
| Current consumption (rated value) | 31 mA |
|---|---|
| Current consumption, max. | 35 mA |
| Power loss, typ. | 0.7 W |
| Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
Entradas/Salidas y comunicación
| between backplane bus and interface | Yes |
|---|---|
| to standard PROFINET controller | Yes |
Conexión y cableado
| Cable length, max. | 15 m |
|---|
Condiciones ambientales
| Installation altitude above sea level, max. | 2 000 m |
|---|---|
| Ambient air temperature-barometric pressure-altitude | Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) |
Otras características
| Product type designation | CM PtP |
|---|---|
| FW update possible | Yes |
| based on | 6ES7137-6AA01-0BA0 |
| usable BaseUnits | BU type A0 |
| I&M data | Yes; I&M0 to I&M3 |
| STEP 7 TIA Portal configurable/integrated from version | see entry ID: 109746275 |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| Inputs | 8 byte; performance mode: 32 byte |
| Outputs | 0 byte; performance mode: 32 byte |
| Automatic encoding | Yes |
| Mechanical coding element | Yes |
| Type of mechanical coding element | type D |
| RS 485 | Yes |
| RS 422 | Yes |
| RS 232 | Yes |
| Design of the connection | Push-in terminal |
| Transmission rate, max. | 115.2 kbit/s |
| RS 232 auxiliary signals | RTS, CTS, DTR, DSR, RI, DCD |
| 4-wire full duplex connection | Yes |
| Bits per character | 7 or 8 |
| Number of stop bits | 1 or 2 bit |
| Parity | None, even, odd, always 1, always 0, any |
| Address area | 1 to 247, extended 1 to 65535 |
| max. number of devices | 32 |
| Buffer memory for telegrams | 4 kbyte |
| Number of telegrams which can be buffered | 255 |
| Diagnostics function | Yes |
| Diagnostic alarm | Yes |
| Wire break | Yes |
| for module diagnostics | Yes; green/red DIAG LED |
| Receive RxD | Yes; green LED |
| Transmit TxD | Yes; green LED |
| EN 50121-3-2 | Yes; EMC for rail vehicles |
| EN 50121-4 | Yes; EMC for signal and telecommunications systems |
| EN 50125-1 | Yes; Rail vehicles - see ambient conditions |
| EN 50125-2 | Yes; Stationary electrical equipment - see ambient conditions |
| EN 50125-3 | Yes; Signal and telecommunications systems - see ambient conditions; |
| EN 61373 | Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B |
| horizontal installation, min. | -40 °C; = Tmin (incl. condensation/frost) |
| horizontal installation, max. | 70 °C; = Tmax; +85 °C for 10 min (OT4, ST1/ST2 acc. to EN 50155) |
| vertical installation, min. | -40 °C; = Tmin |
| vertical installation, max. | 50 °C; = Tmax |
| 2-38, max. | horizontal installation |
| Resistant to commercially available coolants and | Yes; Incl. diesel and oil droplets in the air |
| 60721-3-3 | Class 3B3 on request |
| to EN 60721-3-3 | 0AA0) |
| 60721-3-5 | Class 5B3 on request |
| to EN 60721-3-5 | 0AA0) |
| agriculture acc. to ISO 15003 | (6AG1193-6AA00-0AA0) |
| conditions acc. to EN 60721, EN 60654-4 and | during operation! |
| Electronic equipment on rolling stock acc. to EN 50155 | Yes; Class PC2 protective coating acc. to EN 50155:2017 |
| Military testing according to MIL-I-46058C, Amendment 7 | Yes; Discoloration of coating possible during service life |
| Qualification and Performance of Electrical Insulating | Yes; Conformal coating, Class A |
| to SIMATIC S7-300 | Yes |
| to SIMATIC S7-400 | Yes |
| to SIMATIC S7-1200 | Yes |
| to SIMATIC S7-1500 | Yes |
| Width | 15 mm |
| Height | 73 mm |
| Depth | 58 mm |
| Weight, approx. | 30 g |
| last modified: | 1/8/2026 |