| Product type designation | F-DQ 8x24 V DC/0.5 A PP HF |
|---|
| FW update possible | Yes |
|---|
| based on | 6ES7136-6DC00-0CA0 |
|---|
| usable BaseUnits | BU type A0 |
|---|
| I&M data | Yes; I&M0 to I&M3 |
|---|
| STEP 7 TIA Portal configurable/integrated from version | see entry ID: 109746275 |
|---|
| Rated value (DC) | 24 V |
|---|
| permissible range, lower limit (DC) | 19.2 V |
|---|
| permissible range, upper limit (DC) | 28.8 V |
|---|
| Reverse polarity protection | Yes |
|---|
| Current consumption (rated value) | 75 mA; without load |
|---|
| Current consumption, max. | 21 mA; From the backplane bus |
|---|
| Power consumption from the backplane bus | 70 mW |
|---|
| Power loss, typ. | 3W |
|---|
| Inputs | 6 byte; 5 bytes non-RIOforFA; 6 bytes RIOforFA |
|---|
| Outputs | 6 byte; 5 bytes non-RIOforFA; 6 bytes RIOforFA |
|---|
| Automatic encoding | Yes |
|---|
| Electronic coding element type F | Yes |
|---|
| Type of digital output | Transistor |
|---|
| Number of digital outputs | 8 |
|---|
| Digital outputs, parameterizable | Yes |
|---|
| Short-circuit protection | Yes |
|---|
| Response threshold, typ. | Min. 0.7 A |
|---|
| Limitation of inductive shutdown voltage to | Typ. -39 V |
|---|
| Controlling a digital input | Yes; digital output, according to IEC 61131-2, type 0.5 |
|---|
| with resistive load, max. | 0.5 A |
|---|
| on lamp load, max. | 2W |
|---|
| lower limit | 48 Ω |
|---|
| upper limit | 12 000 Ω |
|---|
| for signal "1", min. | 24 V; L+ (-0.5 V) |
|---|
| for signal "1" rated value | 0.5 A |
|---|
| for signal "0" residual current, max. | 0.5 mA |
|---|
| with inductive load, max. | 0.1 Hz; according to IEC 60947-5-1, DC-13, symmetrical |
|---|
| with capacitive load, max. | 2 Hz; Symmetrical |
|---|
| Current per channel, max. | 0.5 A; note derating data in the manual |
|---|
| Current per module, max. | 3 A; note derating data in the manual |
|---|
| up to 40 °C, max. | 3 A; note derating data in the manual |
|---|
| up to 50 °C, max. | 2.5 A; note derating data in the manual |
|---|
| up to 60 °C, max. | 2 A; note derating data in the manual |
|---|
| shielded, max. | 100 m |
|---|
| unshielded, max. | 100 m |
|---|
| Diagnostics function | Yes; See Chapter "Alarms/diagnostic messages" in the manual |
|---|
| Diagnostic alarm | Yes |
|---|
| RUN LED | Yes; green LED |
|---|
| ERROR LED | Yes; red LED |
|---|
| Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
|---|
| Channel status display | Yes; green LED |
|---|
| for channel diagnostics | Yes; red LED |
|---|
| for module diagnostics | Yes; green/red DIAG LED |
|---|
| between the channels and backplane bus | Yes |
|---|
| Isolation tested with | 750 V DC (type test) and according to EN 50155 (routine test) |
|---|
| Suitable for safety functions | Yes |
|---|
| 50716 | specific application under consideration of all local regulations. |
|---|
| Low demand mode: PFDavg in accordance with | < 6.00E-05 |
|---|
| High demand/continuous mode: PFH in accordance | < 2.00E-09 1/h |
|---|
| EN 50121-3-2 | Yes; EMC for rail vehicles |
|---|
| EN 50121-4 | Yes; EMC for signal and telecommunications systems |
|---|
| EN 50125-1 | Yes; Rail vehicles - see ambient conditions |
|---|
| EN 50125-2 | Yes; Stationary electrical equipment - see ambient conditions |
|---|
| EN 50125-3 | Yes; Signal and telecommunications systems - see ambient conditions; |
|---|
| EN 61373 | Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B |
|---|
| Fire protection acc. to EN 45545-2 | Yes; For proof of conformity, see Service & Support |
|---|
| horizontal installation, min. | -30 °C; = Tmin (incl. condensation/frost) |
|---|
| vertical installation, min. | -30 °C; = Tmin |
|---|
| vertical installation, max. | 50 °C; = Tmax |
|---|
| 2-38, max. | horizontal installation |
|---|
| Resistant to commercially available coolants and | Yes; Incl. diesel and oil droplets in the air |
|---|
| 60721-3-3 | Class 3B3 on request |
|---|
| to EN 60721-3-3 | 0AA0) |
|---|
| 60721-3-5 | Class 5B3 on request |
|---|
| to EN 60721-3-5 | 0AA0) |
|---|
| agriculture acc. to ISO 15003 | (6AG1193-6AA00-0AA0) |
|---|
| conditions acc. to EN 60721, EN 60654-4 and | during operation! |
|---|
| Protection against fouling acc. to EN 60664-3 | Yes; Type 1 protection |
|---|
| Electronic equipment on rolling stock acc. to EN 50155 | Yes; Class PC2 protective coating acc. to EN 50155:2017 |
|---|
| Military testing according to MIL-I-46058C, Amendment 7 | Yes; Discoloration of coating possible during service life |
|---|
| Qualification and Performance of Electrical Insulating | Yes; Conformal coating, Class A |
|---|
| Width | 15 mm |
|---|
| Height | 73 mm |
|---|
| Depth | 58 mm |
|---|
| Weight, approx. | 48 g |
|---|
| IDEA | 4 |
|---|
| UNSPSC | 15 |
|---|
| EMV | Functional Saftey |
|---|
| Railway | Environment |
|---|
| TUEV | Confirmation |
|---|
| last modified: | 10/23/2025 |
|---|
