SIPLUS ET 200SP F-DQ 4X24VDC/2A PM RAIL

DescripciónEspecificacionesDescargasStock

SIPLUS ET 200SP F-DQ 4 × 24 V DC/2 A PM RAIL basado en 6ES7136-6DB00-0CA0 con revestimiento conformado, –30…+60 °C, OT1 con ST1/2 (+70 °C durante 10 min), salidas digitales de seguridad hasta PL e (ISO 13849), hasta SIL 3 (IEC 61508)

Nº de entradas digitales0
Nº de salidas digitales4
Nº de interfaces PROFINET0

Protección y seguridad

Performance level according to ISO 13849-1	PLe
SIL acc. to IEC 61508	SIL 3

Montaje y material

Color code for module-specific color-coded label	CC02

Condiciones ambientales

Installation altitude above sea level, max.	2 000 m
Ambient air temperature-barometric pressure-altitude	Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m)

Certificados y homologaciones

China RoHS	TUEV

Otras características

Product type designation	F-DQ 4x24VDC HF
FW update possible	Yes
based on	6ES7136-6DB00-0CA0
usable BaseUnits	BU type A0
I&M data	Yes; I&M0 to I&M3
STEP 7 TIA Portal configurable/integrated from version	see entry ID: 109746275
Rated value (DC)	24 V
permissible range, lower limit (DC)	20.4 V
permissible range, upper limit (DC)	28.8 V
Reverse polarity protection	Yes
Current consumption (rated value)	75 mA; without load
Current consumption, max.	21 mA; From the backplane bus
Power consumption from the backplane bus	70 mW
Power loss, typ.	4W
Inputs	5 byte
Outputs	5 byte
Automatic encoding	Yes
Electronic coding element type F	Yes
Type of digital output	Transistor
Number of digital outputs	4
Digital outputs, parameterizable	Yes
Short-circuit protection	Yes
Response threshold, typ.	> 3.3 A
Open-circuit detection	Yes
Overload protection	Yes
Limitation of inductive shutdown voltage to	typ. 2*47V
Controlling a digital input	Yes; digital output, according to IEC 61131-2, type 2
with resistive load, max.	2A
on lamp load, max.	10 W
lower limit	12 Ω
upper limit	2 000 Ω
for signal "1", min.	24 V; L+ (-0.5 V)
for signal "1" rated value	2A
for signal "0" residual current, max.	0.5 mA
with inductive load, max.	0.1 Hz; according to IEC 60947-5-1, DC-13, symmetrical
Current per channel, max.	2 A; note derating data in the manual
Current per module, max.	6 A; note derating data in the manual
up to 40 °C, max.	6 A; note derating data in the manual
up to 50 °C, max.	5 A; note derating data in the manual
up to 60 °C, max.	4 A; note derating data in the manual
shielded, max.	1 000 m
unshielded, max.	500 m
Diagnostics function	Yes; See Chapter "Alarms/diagnostic messages" in the manual
Diagnostic alarm	Yes
RUN LED	Yes; green LED
ERROR LED	Yes; red LED
Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED
Channel status display	Yes; green LED
for channel diagnostics	Yes; red LED
for module diagnostics	Yes; green/red DIAG LED
between the channels and backplane bus	Yes
Isolation tested with	750 V DC (type test) and according to EN 50155 (routine test)
Suitable for safety functions	Yes
50716	specific application under consideration of all local regulations.
Low demand mode: PFDavg in accordance with	< 2.00E-04
High demand/continuous mode: PFH in accordance	< 1.00E-08 1/h
EN 50121-3-2	Yes; EMC for rail vehicles
EN 50121-4	Yes; EMC for signal and telecommunications systems
EN 50125-1	Yes; Rail vehicles - see ambient conditions
EN 50125-2	Yes; Stationary electrical equipment - see ambient conditions
EN 50125-3	Yes; Signal and telecommunications systems - see ambient conditions;
EN 61373	Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B
Fire protection acc. to EN 45545-2	Yes; For proof of conformity, see Service & Support
horizontal installation, min.	-30 °C; = Tmin (incl. condensation/frost)
vertical installation, min.	-30 °C; = Tmin
vertical installation, max.	50 °C; = Tmax
2-38, max.	horizontal installation
Resistant to commercially available coolants and	Yes; Incl. diesel and oil droplets in the air
60721-3-3	Class 3B3 on request
to EN 60721-3-3	0AA0)
60721-3-5	Class 5B3 on request
to EN 60721-3-5	0AA0)
agriculture acc. to ISO 15003	(6AG1193-6AA00-0AA0)
conditions acc. to EN 60721, EN 60654-4 and	during operation!
Protection against fouling acc. to EN 60664-3	Yes; Type 1 protection
Electronic equipment on rolling stock acc. to EN 50155	Yes; Class PC2 protective coating acc. to EN 50155:2017
Military testing according to MIL-I-46058C, Amendment 7	Yes; Discoloration of coating possible during service life
Qualification and Performance of Electrical Insulating	Yes; Conformal coating, Class A
Width	15 mm
Height	73 mm
Depth	58 mm
Weight, approx.	57 g
IDEA	4
UNSPSC	15
EMV	Functional Saftey
Railway	Environment
TUEV	Confirmation
last modified:	10/23/2025

Ficha técnica oficial del fabricante con todas las especificaciones.

Producto bajo pedido

Puedes pedirlo ya: te lo servimos en el plazo indicado. Selecciona la cantidad para añadirlo al carrito.

Plazo de entrega (días):

Avísame cuando haya stock

Si prefieres esperar a que vuelva a haber envío inmediato, déjanos tu email.

Solo usaremos tu email para avisarte de este artículo.

SIPLUS ET 200SP F-DQ 4X24VDC/2A PM RAIL

Save 10%

6AG2136-6DB00-1CA0

€872,57 EUR

~~€969,52 EUR~~

6AG2136-6DB00-1CA0

Plazo de entrega (días):

€872,57 EUR /each

Plazo de entrega (días):

€872,57 EUR /each

Total:

Total: €0,00 EUR

in cart Total: