SIPLUS ET 200SP F-DI 4/8X24VDC RAIL
Siemens

SIPLUS ET 200SP F-DI 4/8X24VDC RAIL

SIPLUS ET 200SP F-DI 4/8 × 24 V DC RAIL basado en 6ES7136-6BA01-0CA0 con revestimiento conformado, –40…+60 °C, OT2 con ST1/2 (+70 °C durante 10 min), entradas digitales de seguridad hasta PL e (ISO 13849-1), SIL3 (IEC 61508)

Protección y seguridad
Performance level according to ISO 13849-1PLe
Category according to ISO 13849-1Cat. 4
SIL acc. to IEC 61508SIL 3
Montaje y material
Color code for module-specific color-coded labelCC01
Condiciones ambientales
Installation altitude above sea level, max.2 000 m
Ambient air temperature-barometric pressure-altitudeTmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m)
Otras características
Product type designationF-DI 8x24VDC HF
FW update possibleYes
based on6ES7136-6BA01-0CA0
usable BaseUnitsBU type A0
I&M dataYes; I&M0 to I&M3
STEP 7 TIA Portal configurable/integrated from versionsee entry ID: 109746275
Rated value (DC)24 V
permissible range, lower limit (DC)19.2 V
permissible range, upper limit (DC)28.8 V
Reverse polarity protectionYes
Current consumption, max.40 mA; without load
Number of outputs8
Short-circuit protectionYes; Electronic (response threshold 0.7 A to 1.8 A)
up to 60 °C, max.0.3 A
24 VYes; min. L+ (-1.5 V)
Output current per channel, max.300 mA
Output current per module, max.800 mA; Total current of all encoders
Power loss, typ.2W
Inputs7 byte; S7-300/400F CPU, 6 byte
Outputs5 byte; S7-300/400F CPU, 4 byte
Automatic encodingYes
Electronic coding element type FYes
Number of digital inputs8
Digital inputs, parameterizableYes
Sourcing/sinking inputYes; P-reading
for signal "0"-30 to +5 V
for signal "1"+15 to +30 V
for signal "1", typ.3.7 mA
parameterizableYes
at "0" to "1", min.0.4 ms
at "0" to "1", max.20 ms
at "1" to "0", min.0.4 ms
at "1" to "0", max.20 ms
shielded, max.1 000 m
unshielded, max.500 m
Diagnostics functionYes; See Chapter "Alarms/diagnostic messages" in the manual
Diagnostic alarmYes
RUN LEDYes; green LED
ERROR LEDYes; red LED
Monitoring of the supply voltage (PWR-LED)Yes; green PWR LED
Channel status displayYes; green LED
for channel diagnosticsYes; red LED
for module diagnosticsYes; green/red DIAG LED
between the channels and backplane busYes
Isolation tested with750 V DC (type test) and according to EN 50155 (routine test)
Suitable for safety functionsYes
50716specific application under consideration of all local regulations.
Low demand mode: PFDavg in accordance with< 2.00E-05
High demand/continuous mode: PFH in accordance< 1.00E-09 1/h
EN 50121-3-2Yes; EMC for rail vehicles
EN 50121-4Yes; EMC for signal and telecommunications systems
EN 50125-1Yes; Rail vehicles - see ambient conditions
EN 50125-2Yes; Stationary electrical equipment - see ambient conditions
EN 50125-3Yes; Signal and telecommunications systems - see ambient conditions;
EN 61373Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B
Fire protection acc. to EN 45545-2Yes; For proof of conformity, see Service & Support
horizontal installation, min.-40 °C; = Tmin (incl. condensation/frost)
vertical installation, min.-40 °C; = Tmin
vertical installation, max.50 °C; = Tmax
2-38, max.horizontal installation
Resistant to commercially available coolants andYes; Incl. diesel and oil droplets in the air
60721-3-3Class 3B3 on request
to EN 60721-3-30AA0)
60721-3-5Class 5B3 on request
to EN 60721-3-50AA0)
agriculture acc. to ISO 15003(6AG1193-6AA00-0AA0)
conditions acc. to EN 60721, EN 60654-4 andduring operation!
Protection against fouling acc. to EN 60664-3Yes; Type 1 protection
Electronic equipment on rolling stock acc. to EN 50155Yes; Class PC2 protective coating acc. to EN 50155:2017
Military testing according to MIL-I-46058C, Amendment 7Yes; Discoloration of coating possible during service life
Qualification and Performance of Electrical InsulatingYes; Conformal coating, Class A
Width15 mm
Height73 mm
Depth58 mm
Weight, approx.29 g
IDEA4
UNSPSC15
EMVFunctional Saftey
RailwayEnvironment
TUEVTUEV
last modified:10/23/2025

Ficha técnica oficial del fabricante con todas las especificaciones.

PDF Ficha técnica
Producto bajo pedido

Puedes pedirlo ya: te lo servimos en el plazo indicado. Selecciona la cantidad para añadirlo al carrito. Si prefieres esperar a que vuelva a haber stock inmediato, déjanos tu email abajo.

Plazo de entrega (días):

Este artículo va bajo pedido.

Avísame cuando esté disponible

Solo usaremos tu email para avisarte de este artículo.
SIPLUS ET 200SP F-DI 4/8X24VDC RAIL
SIPLUS ET 200SP F-DI 4/8X24VDC RAIL
€760,67 EUR
€845,19 EUR
6AG2136-6BA01-2CA0
Plazo de entrega (días):
€760,67 EUR /each
Total:
Envío 24/48 h Material en stock Garantía y RMA Gestión de devoluciones Asesoramiento técnico Abre un ticket de soporte Distribuidor oficial Marcas líderes del sector

Accesorios