SIPLUS ET 200SP BU20-P16+A0+2B
Siemens

SIPLUS ET 200SP BU20-P16+A0+2B

SIPLUS ET 200SP BU20-P16+A0+2B basado en 6ES7193-6BP00-0BU0 con revestimiento conformado, –40…+70 °C, BU tipo U0, bornes de inserción directa, sin bornes AUX, puenteados hacia la izquierda, An x Al: 20 mm × 117 mm

Conexión y cableado
for process terminals120 V
For process terminals, max.10 A; Point of contact, derating depends on the module
between process terminals and supply voltageYes; Not applicable for process terminals 15 and 16
Terminal typePush-in terminal
Number of process terminals to I/O module16
Number of terminals to AUX bus0
Number of add-on terminals0
Number of terminals with connection to P1 and P2 bus2
Condiciones ambientales
Installation altitude above sea level, max.3 000 m
Otras características
Product type designationBU type U0
based on6ES7193-6BP00-0BU0
Rated value (DC)See manual
For P1 and P2 bus120 V
For AUX bus120 V; Equal potential group to P1/P2 bus or PE
Rated value (AC)See manual
up to 60 °C, max.10 A
For P1 and P2 bus, max.10 A
For AUX bus, max.10 A
Automatic encodingYes
Potential group continued from the leftYes
Number of slots1
between backplane bus and supply voltageYes
Isolation tested with3 100 V DC
horizontal installation, min.-40 °C; = Tmin (incl. condensation/frost)
horizontal installation, max.70 °C; = Tmax
vertical installation, min.-40 °C; = Tmin
vertical installation, max.50 °C; = Tmax
2-38, max.conditions)
Resistant to commercially available coolants andYes; Incl. diesel and oil droplets in the air
60721-3-3Class 3B3 on request
to EN 60721-3-30AA0)
60721-3-6degree 3); *
to EN 60721-3-60AA0)
conditions acc. to EN 60721, EN 60654-4 andduring operation!
Protection against fouling acc. to EN 60664-3Yes; Type 1 protection
Military testing according to MIL-I-46058C, Amendment 7Yes; Discoloration of coating possible during service life
Qualification and Performance of Electrical InsulatingYes; Conformal coating, Class A
Conductor cross-section, min.0.14 mm²; 0.2 mm² without wire end ferrule
Conductor cross-section, max.2.5 mm²; 1.5 mm² with wire end ferrule
Width20 mm
Height117 mm
Depth35 mm
Weight, approx.50 g
IDEA4
UNSPSC15
EMVMaritime application
last modified:7/16/2025

Ficha técnica oficial del fabricante con todas las especificaciones.

PDF Ficha técnica
Producto bajo pedido

Puedes pedirlo ya: te lo servimos en el plazo indicado. Selecciona la cantidad para añadirlo al carrito.

Plazo de entrega (días):
Avísame cuando haya stock

Si prefieres esperar a que vuelva a haber envío inmediato, déjanos tu email.

Solo usaremos tu email para avisarte de este artículo.

Avísame cuando esté disponible
SIPLUS ET 200SP BU20-P16+A0+2B
SIPLUS ET 200SP BU20-P16+A0+2B
€76,70 EUR
€85,22 EUR
6AG1193-6BP00-7BU0
Plazo de entrega (días):
€76,70 EUR /each
Total:
Envío 24/48 h Material en stock Garantía y RMA Gestión de devoluciones Asesoramiento técnico Abre un ticket de soporte Distribuidor oficial Marcas líderes del sector

Accesorios