SIPLUS ET 200SP AI 8XI 2-/4-WIRE BA
Siemens

SIPLUS ET 200SP AI 8XI 2-/4-WIRE BA

SIPLUS ET 200SP AI 8 × I 2/4 hilos BA basado en 6ES7134-6GF00-0AA1 con revestimiento conformado, –40…+70 °C, módulo de entrada analógica, adecuado para BU tipo A0, A1, código de color CC01, diagnóstico de módulo, 16 bits

Montaje y material
Color code for module-specific color-coded labelCC01
Condiciones ambientales
Installation altitude above sea level, max.5 000 m
Certificados y homologaciones
China RoHSCCC-Ex
Otras características
Product type designationAI 8xI 2-/4-wire BA
FW update possibleYes
based on6ES7134-6GF00-0AA1
usable BaseUnitsBU type A0, A1
I&M dataYes; I&M0 to I&M3
STEP 7 TIA Portal configurable/integrated from versionsee entry ID: 109746275
Reparameterization possible in RUNYes
Rated value (DC)24 V
permissible range, lower limit (DC)19.2 V
permissible range, upper limit (DC)28.8 V
Reverse polarity protectionYes
Current consumption (rated value)25 mA; rated voltage, all channels active, no load
24 VYes
Short-circuit protectionYes
Output current, max.0.7 A; total current of all encoders/channels
Power loss, typ.0.7 W; rated voltage, 50 % active channels, 50 % of range
Address space per module, max.16 byte
Automatic encodingYes
Mechanical coding elementYes
Type of mechanical coding elementType A
1-wire connectionBU type A0, A1
2-wire connectionBU type A0, A1
4-wire connectionBU type A0, A1 + potential distributor module
Number of analog inputs8; Single-ended
For current measurement8
Cycle time (all channels), min.1 ms; per channel
0 to 20 mAYes
Input resistance (0 to 20 mA)100 Ω; 15 bit
20 mA to +20 mAYes
Input resistance (-20 mA to +20 mA)100 Ω; 16 bit incl. sign
4 mA to 20 mAYes
Input resistance (4 mA to 20 mA)100 Ω; 15 bit
shielded, max.200 m
Resolution with overrange (bit including sign), max.16 bit
Integration time, parameterizableYes
Interference voltage suppression for interference16.67 / 50 / 60 / 4 800 (16.67 / 50 / 60)
Conversion time (per channel)180 / 60 / 50 / 0.625 (67.5 / 22.5 / 18.75) ms
Number of smoothing levels4
ParameterizableYes
Step: NoneYes
Step: lowYes; 4x smoothing
Step: MediumYes; 8x smoothing
Step: HighYes; 16x smoothing
for current measurement as 2-wire transducerYes
Burden of 2-wire transmitter, max.650 Ω
for current measurement as 4-wire transducerYes
Linearity error (relative to input range), (+/-)0.01 %
Temperature error (relative to input range), (+/-)0.005 %/K
Crosstalk between the inputs, min.50 dB
Current, relative to input range, (+/-)0.7 %
Series mode interference (peak value of interference <70 dB; With conversion time 67.5 / 22.5 / 18.75 ms: 40 dB
Diagnostics functionYes
Diagnostic alarmYes
Monitoring the supply voltageYes
Wire breakYes; at 4 to 20 mA
Short-circuitYes; Sensor supply to M; module by module
Group errorYes
Overflow/UnderflowYes; module-wise
Monitoring of the supply voltage (PWR-LED)Yes; green LED
Channel status displayYes; green LED
for module diagnosticsYes; green/red DIAG LED
between the channels and backplane busYes
Isolation tested with707 V DC (type test)
signed firmware updateYes; firmware V2.0.0 or higher
safely removing dataYes; firmware V2.0.0 or higher
data integrityYes; firmware V2.0.0 or higher
horizontal installation, min.-40 °C; = Tmin (incl. condensation/frost)
horizontal installation, max.70 °C; = Tmax
vertical installation, min.-40 °C; = Tmin
vertical installation, max.50 °C; = Tmax
2-38, max.horizontal installation
Resistant to commercially available coolants andYes; Incl. diesel and oil droplets in the air
60721-3-3Class 3B3 on request
to EN 60721-3-30AA0)
60721-3-6degree 3); *
to EN 60721-3-60AA0)
conditions acc. to EN 60721, EN 60654-4 andduring operation!
Protection against fouling acc. to EN 60664-3Yes; Type 1 protection
Military testing according to MIL-I-46058C, Amendment 7Yes; Discoloration of coating possible during service life
Qualification and Performance of Electrical InsulatingYes; Conformal coating, Class A
Width15 mm
Height73 mm
Depth58 mm
Weight, approx.31 g
IDEA4
UNSPSC15
EMVFor use in hazardous locations
last modified:3/10/2026

Ficha técnica oficial del fabricante con todas las especificaciones.

PDF Ficha técnica
Producto bajo pedido

Puedes pedirlo ya: te lo servimos en el plazo indicado. Selecciona la cantidad para añadirlo al carrito. Si prefieres esperar a que vuelva a haber stock inmediato, déjanos tu email abajo.

Plazo de entrega (días):

Este artículo va bajo pedido.

Avísame cuando esté disponible

Solo usaremos tu email para avisarte de este artículo.
SIPLUS ET 200SP AI 8XI 2-/4-WIRE BA
SIPLUS ET 200SP AI 8XI 2-/4-WIRE BA
€590,93 EUR
€656,59 EUR
6AG1134-6GF00-7AA1
Plazo de entrega (días):
€590,93 EUR /each
Total:
Envío 24/48 h Material en stock Garantía y RMA Gestión de devoluciones Asesoramiento técnico Abre un ticket de soporte Distribuidor oficial Marcas líderes del sector

Accesorios