SIPLUS ET 200SP RQ 4x120VDC/230VAC/5A
Siemens

SIPLUS ET 200SP RQ 4x120VDC/230VAC/5A

SIPLUS ET 200SP RQ 4 × 120 V DC..230 V AC/5 A ST basado en 6ES7132-6HD01-0BB1 con revestimiento conformado, –40…+70 °C, módulo de relés normalmente abierto, adecuado para BU tipo B0 o B1, diagnóstico de módulo

Condiciones ambientales
Installation altitude above sea level, max.3 000 m
Otras características
Product type designationRQ 4x120 VDC ... 230 VAC/5 A NO ST
based on6ES7132-6HD01-0BB1
usable BaseUnitsBU type B0, B1
I&M dataYes; I&M0 to I&M3
STEP 7 TIA Portal configurable/integrated from versionsee entry ID: 109746275
Redundancy capabilityYes
Rated value (DC)24 V
permissible range, lower limit (DC)19.2 V
permissible range, upper limit (DC)28.8 V
Reverse polarity protectionYes
Current consumption (rated value)55 mA; without load
Rated value (AC)230 V
Power loss, typ.1.5 W
Inputs+ 1 byte for QI information
Outputs1 byte
Automatic encodingYes
Mechanical coding elementYes
Type of mechanical coding elementtype C
2-wire connectionBU type B1
3-wire connectionBU type B0
Type of digital outputRelays
Number of digital outputs4
Current-sinkingYes
Current-sourcingYes
Digital outputs, parameterizableYes
for logic linksYes
for redundant control of a loadYes
with resistive load, max.2 Hz
with inductive load (acc. to IEC 60947-5-1, AC15), max.0.5 Hz
on lamp load, max.2 Hz
Current per channel, max.5 A; > +60 °C max. continuous current per relay 3 A
Current per module, max.20 A
up to 50 °C, max.20 A
up to 60 °C, max.16 A
up to 40 °C, max.20 A
Number of relay outputs4
Rated supply voltage of relay coil L+ (DC)24 V
Number of operating cycles, max.7 000 000; see additional description in the manual
with inductive load, max.2 A; see additional description in the manual
Thermal continuous current, max.5 A; Max. 1 385 VA, 150 W
Switching current, min.100 mA; 5 V DC
Rated switching voltage (DC)24 V DC to 120 V DC
Rated switching voltage (AC)24V AC to 230V AC
shielded, max.1 000 m
unshielded, max.200 m
Diagnostics functionYes
Substitute values connectableYes
Diagnostic alarmYes
Monitoring the supply voltageYes
Monitoring of the supply voltage (PWR-LED)Yes; green PWR LED
Channel status displayYes; green LED
for module diagnosticsYes; green/red DIAG LED
between the channelsYes
between the channels and backplane busYes
between the channels and the power supply of theYes
between channels and backplane bus/supply voltage240 V AC
Isolation tested with2 500 V DC (type test)
between backplane bus and supply voltage707 V DC (type test)
horizontal installation, min.-40 °C; = Tmin (incl. condensation/frost)
vertical installation, min.-40 °C; in all other mounting positions
vertical installation, max.50 °C; in all other mounting positions
With condensation, tested in accordance with IEC 60068100 %; incl. condensation / frost permitted (no commissioning under
2-38, max.condensation conditions)
Resistant to commercially available coolants andYes; Incl. diesel and oil droplets in the air
60721-3-3Class 3B3 on request
to EN 60721-3-30AA0)
60721-3-6request
to EN 60721-3-60AA0)
conditions acc. to EN 60721, EN 60654-4 andduring operation!
Protection against fouling acc. to EN 60664-3Yes; Type 1 protection
Military testing according to MIL-I-46058C, Amendment 7Yes; Discoloration of coating possible during service life
Qualification and Performance of Electrical InsulatingYes; Conformal coating, Class A
Width20 mm
Height73 mm
Depth58 mm
Weight, approx.40 g
IDEA4
UNSPSC15
EMVMaritime application
last modified:10/23/2025

Ficha técnica oficial del fabricante con todas las especificaciones.

Producto bajo pedido

Puedes pedirlo ya: te lo servimos en el plazo indicado. Selecciona la cantidad para añadirlo al carrito.

Plazo de entrega (días):
Avísame cuando haya stock

Si prefieres esperar a que vuelva a haber envío inmediato, déjanos tu email.

Solo usaremos tu email para avisarte de este artículo.

Avísame cuando esté disponible

SIPLUS ET 200SP RQ 4x120VDC/230VAC/5A
€203,68 EUR
€226,31 EUR
6AG1132-6HD01-7BB1
Plazo de entrega (días):
€203,68 EUR /each
Total:

Accesorios