€1.718,75 EUR
+ VAT
Especificaciones técnicas
Protección y seguridad
| intrinsic device protection | Yes |
|---|---|
| evaluation of thermistor motor protection | Yes; Type A PTC or Klixon / Thermoclick |
| design of the overvoltage protection | Varistor |
| protection class IP on the front according to IEC 60529 | IP20 |
| touch protection on the front according to IEC 60529 | finger-safe, for vertical contact from the front |
Datos eléctricos
| starting voltage [%] | 30 ... 100 % |
|---|---|
| stopping voltage [%] | 50 %; non-adjustable |
| current limiting value [%] adjustable | 130 ... 700 % |
| for main current circuit | 100 ms |
| insulation voltage rated value | 600 V |
| impulse voltage rated value | 6 kV |
| blocking voltage of the thyristor maximum | 1 600 V |
| surge voltage resistance rated value | 6 kV |
| adjustable current limitation | Yes |
| relative negative tolerance of the operating voltage | -15 % |
| relative positive tolerance of the operating voltage | 10 % |
| relative negative tolerance of the operating voltage at | -15 % |
| relative positive tolerance of the operating voltage at | 10 % |
| type of voltage of the control supply voltage | AC |
| relative negative tolerance of the control supply voltage at | -15 % |
| relative positive tolerance of the control supply voltage at | 10 % |
| control supply voltage frequency | 50 ... 60 Hz |
| relative negative tolerance of the control supply voltage | -10 % |
| relative positive tolerance of the control supply voltage | 10 % |
| control supply current in standby mode rated value | 30 mA |
| holding current in bypass operation rated value | 75 mA |
| inrush current by closing the bypass contacts maximum | 0.17 A |
| inrush current peak at application of control supply voltage | 12.2 A |
| duration of inrush current peak at application of control supply | 2.2 ms |
| for AWG cables for main current circuit solid | 2x (16 ... 12), 2x (14 ... 8) |
Entradas/Salidas y comunicación
| PROFINET standard | Yes |
|---|---|
| EtherNet/IP | Yes |
| Modbus RTU | Yes |
| Modbus TCP | Yes |
| PROFIBUS | Yes |
Conexión y cableado
| removable terminal for control circuit | Yes |
|---|---|
| for AWG cables for control circuit solid | 1x (20 ... 12), 2x (20 ... 14) |
| for main contacts with screw-type terminals | 2 ... 2.5 N·m |
Condiciones ambientales
| vibration resistance | 15 mm to 6 Hz; 2 g to 500 Hz |
|---|---|
| installation altitude at height above sea level maximum | 5 000 m |
Certificados y homologaciones
| CE marking | Yes |
|---|---|
| UL approval | Yes |
| CSA approval | Yes |
Otras características
| product brand name | SIRIUS |
|---|---|
| product category | Hybrid switching devices |
| product type designation | 3RW52 |
| start-up ramp time of soft starter | 0 ... 20 s |
| is supported HMI-Standard | Yes |
| is supported HMI-High Feature | Yes |
| product feature integrated bypass contact system | Yes |
| number of controlled phases | 3 |
| for control circuit | 100 ms |
| degree of pollution | 3, acc. to IEC 60947-4-2 |
| service factor | 1 |
| between main and auxiliary circuit | 600 V |
| shock resistance | 15 g / 11 ms, from 12 g / 11 ms with potential contact lifting |
| utilization category according to IEC 60947-4-2 | AC 53a |
| Net Weight | 2.3 kg |
| ramp-up (soft starting) | Yes |
| soft stopping | Yes |
| Soft Torque | Yes |
| pump stop | Yes |
| inside-delta circuit | Yes |
| auto-RESET | Yes |
| manual RESET | Yes |
| remote reset | Yes; By turning off the control supply voltage |
| communication function | Yes |
| operating measured value display | Yes; Only in conjunction with special accessories |
| error logbook | Yes; Only in conjunction with special accessories |
| via software configurable | Yes |
| PROFIenergy | Yes; in connection with the PROFINET Standard communication module |
| firmware update | Yes |
| Operating frequency 1 rated value | 50 Hz |
| Operating frequency 2 rated value | 60 Hz |
| relative negative tolerance of the operating frequency | -10 % |
| relative positive tolerance of the operating frequency | 10 % |
| minimum load [%] | 15 %; Relative to smallest settable Ie |
| number of digital inputs | 1 |
| number of digital outputs | 3 |
| not parameterizable | 2 |
| digital output version | 2 normally-open contacts (NO) / 1 changeover contact (CO) |
| number of analog outputs | 0 |
| fastening method | screw fixing |
| height | 275 mm |
| width | 170 mm |
| depth | 152 mm |
| forwards | 10 mm |
| backwards | 0 mm |
| upwards | 100 mm |
| downwards | 75 mm |
| solid | 2x (1.0 ... 2.5 mm²), 2x (2.5 ... 10 mm²) |
| finely stranded with core end processing | 2x (1.0 ... 2.5 mm²), 2x (2.5 ... 6.0 mm²) |
| for control circuit solid | 1x (0.5 ... 4.0 mm²), 2x (0.5 ... 2.5 mm²) |
| between soft starter and motor maximum | 800 m |
| for auxiliary and control contacts with screw-type | 0.8 ... 1.2 N·m |
| EMC emitted interference | acc. to IEC 60947-4-2: Class A |
| usable for Standard Faults up to 575/600 V | Type: Class RK5 / K5, max. 150 A; Iq = 5 kA |
| usable for High Faults up to 575/600 V according to | Type: Class J / L, max. 150 A; Iq = 100 kA |
| usable for Standard Faults at inside-delta circuit up | Type: Class RK5 / K5, max. 150 A; Iq = 5 kA |
| usable for High Faults at inside-delta circuit up to | Type: Class J / L, max. 150 A; Iq = 100 kA |
| contact rating of auxiliary contacts according to UL | R300-B300 |
| 1/L1 | 3/L2 |
| 5/L3 | A1 |
| ON/RUN | BYPASSED |
| 6/T3 | T22 |
| 13 NO | 23 NO |
| 98 NO | 96 NC |
| last modified: | 4/4/2026 |
Accesorios
-