Relé temporizador, 3RP, multifunción, 2CO, 400-440V AC, tornillo

Relé temporizador, 3RP, multifunción, 2CO, 400-440V AC, tornillo

Especificaciones
Relé temporizador, multifunción 2 conmutados, 27 funciones 7 rangos de tiempo (0,05 s...100 h) AC 400-440 V con AC 50/60 Hz con LED, borne de tornillo

Ficha técnica oficial del fabricante con todas las especificaciones.

Producto bajo pedido

Puedes pedirlo ya: te lo servimos en el plazo indicado. Selecciona la cantidad para añadirlo al carrito.

Plazo de entrega (días):
Avísame cuando haya stock

Si prefieres esperar a que vuelva a haber envío inmediato, déjanos tu email.

Solo usaremos tu email para avisarte de este artículo.

Avísame cuando esté disponible

Relé temporizador, 3RP, multifunción, 2CO, 400-440V AC, tornillo
€122,17 EUR + VAT
€244,34 EUR
3RP2505-1BT20
Plazo de entrega (días):
€122,17 EUR /each
Total:

Especificaciones técnicas

Protección y seguridad
test voltage for isolation test2.5 kV
design of the fuse link for short-circuit protection of the auxiliaryfuse gL/gG: 4 A
protection class IP on the front according to IEC 60529IP20
Datos eléctricos
power loss [W] maximum2W
insulation voltage for overvoltage category III according to IEC500 V
surge voltage resistance rated value4 000 V
thermal current5A
power supply influence1% in the whole voltage range to the set runtime
type of voltage of the control supply voltageAC
control supply voltage frequency 150 ... 60 Hz
switching capacity current with inductive load0.01 ... 3 A
Conexión y cableado
design of the control terminal non-floatingYes
operating frequency with 3RT2 contactor maximum5 000 1/h
product component removable terminal for auxiliary andYes
for AWG cables solid1x (20 ... 12), 2x (20 ... 14)
Montaje y material
material of switching contactsAgSnO2
Condiciones ambientales
vibration resistance according to IEC 60068-2-610 ... 55 Hz / 0.35 mm
installation altitude at height above sea level maximum2 000 m
Otras características
product brand nameSIRIUS
design of the product27 functions
product type designation3RP25
relay outputYes
degree of pollution3
shock resistance according to IEC 60068-2-2711 g / 15 ms
mechanical service life (operating cycles) typical10 000 000
adjustable time0.05 s ... 100 h
relative setting accuracy relating to full-scale value5 %; +/-
recovery time150 ms
relative repeat accuracy1 %; +/-
influence of the surrounding temperature1% in the whole temperature range to the set runtime
Net Weight0.161 g
initial value0.85
full-scale value1.1
ON-delayYes
ON-delay/instantaneous contactYes
passing make contactYes
passing make contact/instantaneous contactYes
flashing symmetrically with interval startYes
flashing symmetrically with pulse start/instantaneousYes
flashing symmetrically with pulse startYes
star-delta circuitYes
additive ON-delayYes
passing break contactYes
passing break contact/instantaneousYes
OFF delayYes
OFF delay/instantaneousYes
pulse delayedYes
pulse delayed/instantaneousYes
pulse-shapingYes
pulse-shaping/instantaneousYes
additive ON-delay/instantaneousYes
ON-delay/OFF-delay/instantaneousYes
retrotriggerable with deactivated controlYes
retrotriggerable with switched-on control signalYes
retrotriggerable with switched-on controlYes
retriggerable with deactivated control signalYes
delayed switching0
instantaneous contact0
contact rating of auxiliary contacts according to ULR300 / B300
EMC emitted interference according to IEC 61812-1ambience A (industrial sector)
EMC immunity according to IEC 61812-1corresponds to degree of severity 3
due to burst according to IEC 61000-4-42 kV network connection / 1 kV control connection
due to conductor-earth surge according to IEC 61000-4-52 kV
due to conductor-conductor surge according to IEC1 kV
field-based interference according to IEC 61000-4-310 V/m
electrostatic discharge according to IEC 61000-4-24 kV contact discharge / 8 kV air discharge
category according to EN 954-1none
type of insulationBasic insulation
type of electrical connectionscrew terminal
for auxiliary and control circuitscrew-type terminals
solid1x (0.5 ... 4 mm²), 2x (0.5 ... 2.5 mm²)
finely stranded with core end processing1x (0.5 ... 4 mm²), 2x (0.5 ... 1.5 mm²)
tightening torque0.6 ... 0.8 N·m
design of the thread of the connection screwM3
mounting positionany
fastening methodscrew and snap-on mounting onto 35 mm DIN rail
height100 mm
width22.5 mm
depth90 mm
forwards0 mm
backwards0 mm
upwards0 mm
downwards0 mm
relative humidity during operation10 ... 95 %
15 C21/25 C
last modified:5/29/2026

Accesorios