ET 200SP, AI 2xI 2-/4-Wire ST, 1 un.
Siemens

ET 200SP, AI 2xI 2-/4-Wire ST, 1 un.

SIMATIC ET 200SP, módulo de entrada analógica, AI 2xI 2-/4-Wire Standard, cantidad por paquete: 1 unidad, adecuado para tipo de BU A0, A1, Código de color CC05, diagnóstico de módulo, 16 bits

  • Nº de entradas analógicas2
  • Nº de salidas analógicas0
  • Nº de interfaces PROFINET0
Protección y seguridad
Reverse polarity protectionYes
Short-circuit protectionYes
short-circuitYes; Short-circuit of the encoder supply
Isolation tested with707 V DC (type test)
Datos eléctricos
Current consumption, max.45 mA; without sensor supply
Output current, max.50 mA; Total current for both channels (two-wire)
Power loss, typ.1.1 W
For current measurement2
permissible input current for current input (destruction limit),50 mA
Interference voltage suppression for interference16.6 / 50 / 60 Hz / off
for current measurement as 2-wire transducerYes
for current measurement as 4-wire transducerYes
Current, relative to input range, (+/-)0.5 %
Common mode voltage, max.10 V
Monitoring the supply voltageYes
Monitoring of the supply voltage (PWR-LED)Yes; green PWR LED
between the channels and the power supply of theYes
Entradas/Salidas y comunicación
PROFIBUS from GSD version/GSD revisionOne GSD file each, Revision 3 and 5 and higher
PROFINET from GSD version/GSD revisionV2.3 / -
Montaje y material
Color code for module-specific color-coded labelCC05
Condiciones ambientales
Installation altitude above sea level, max.5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Otras características
Product type designationAI 2xI 2-/4-wire ST
HW functional statusfrom FS04
FW update possibleYes
usable BaseUnitsBU type A0, A1
I&M dataYes; I&M0 to I&M3
STEP 7 TIA Portal configurable/integrated from versionV13 SP1
STEP 7 configurable/integrated from versionV5.5 SP3
Reparameterization possible in RUNYes
Rated value (DC)24 V
permissible range, lower limit (DC)19.2 V
permissible range, upper limit (DC)28.8 V
24 VYes
Address space per module, max.4 byte; + 1 byte for QI information
Automatic encodingYes
Mechanical coding elementYes
Type of mechanical coding elementType A
1-wire connectionBU type A0, A1
2-wire connectionBU type A0, A1
4-wire connectionBU type A0, A1
Number of analog inputs2
Cycle time (all channels), min.500 µs
0 to 20 mAYes; 15 bit
Input resistance (0 to 20 mA)130 Ω; 90 ohms with two wires
20 mA to +20 mAYes; 16 bit incl. sign
Input resistance (-20 mA to +20 mA)130 Ω
4 mA to 20 mAYes; 15 bit
Input resistance (4 mA to 20 mA)130 Ω; 90 ohms with two wires
shielded, max.1 000 m
Measurement principleSigma Delta
Resolution with overrange (bit including sign), max.16 bit
Integration time, parameterizableYes
Conversion time (per channel)50 ms @ 60 Hz, 60 ms @ 50 Hz, 180 ms @ 16.6 Hz, 500 µs without filter
Number of smoothing levels4
parameterizableYes
Step: NoneYes; 1x conversion time
Step: lowYes; 4x conversion time
Step: MediumYes; 8x conversion time
Step: HighYes; 16x conversion time
Burden of 2-wire transmitter, max.650 Ω
Linearity error (relative to input range), (+/-)0.01 %
Temperature error (relative to input range), (+/-)0.005 %/K
Crosstalk between the inputs, min.-50 dB
Series mode interference (peak value of interference <70 dB
Common mode interference, min.90 dB
Diagnostics functionYes
Diagnostic alarmYes
Wire breakYes; at 4 to 20 mA
Group errorYes
Overflow/UnderflowYes
Channel status displayYes; green LED
for module diagnosticsYes; green/red DIAG LED
between the channels and backplane busYes
between the inputs (UCM)10 Vpp
horizontal installation, min.-30 °C; < 0 °C as of FS04
horizontal installation, max.60 °C
vertical installation, min.-30 °C; < 0 °C as of FS04
vertical installation, max.50 °C
dew point, min.-60 °C; suitable for dry room applications
Width15 mm
Height73 mm
Depth58 mm
Weight, approx.32 g
otherEnvironment
last modified:3/10/2026

Ficha técnica oficial del fabricante con todas las especificaciones.

Producto en stock

Selecciona la cantidad y verás el plazo de entrega según el stock disponible. Si pides más unidades de las que hay en stock, podemos avisarte cuando tengamos toda la cantidad lista para envío inmediato.

Plazo de entrega (días):

Pides más unidades de las que hay en stock inmediato.

Avísame cuando esté disponible

Solo usaremos tu email para avisarte de este artículo.

ET 200SP, AI 2xI 2-/4-Wire ST, 1 un.
€188,24 EUR + VAT
€221,46 EUR
6ES7134-6GB00-0BA1
Plazo de entrega (días):
€188,24 EUR /each
Total:

Accesorios