ET 200SP, arrancador inversor 4,0-12A HF

DescripciónEspecificacionesDescargasGarantías

Arrancador inversor High Feature; incl. ventilador (3RW4928-8VB00); maniobra electrónica; protección electrónica contra sobrecarga hasta 5,5 kW/400 V; rango de ajuste 4,0...12 A; PROFIenergy; opción: módulo 3DI/LC

🔌 Comunicación	Yes

Entradas/Salidas y comunicación

PROFIBUS DP protocol	Yes
PROFINET protocol	Yes
type of electrical connection of the communication interface	Plug contact to Base Unit

Condiciones ambientales

installation altitude at height above sea level maximum	4 000 m

Prestaciones y durabilidad

MTBF	46 a

Otras características

product brand name	SIMATIC
product category	Motor starter
product type designation	ET 200SP
equipment version according to IEC 60947-4-2	3
product function	Reversing starter
on-site operation	Yes
intrinsic device protection	Yes
remote firmware update	Yes
for power supply reverse polarity protection	Yes
at AC in hot operating state per pole	3W
insulation voltage rated value	500 V
degree of pollution	2
overvoltage category	III
surge voltage resistance rated value	6 kV
between main and auxiliary circuit	500 V
consumed current maximum	180 mA
shock resistance	6 g / 11 ms
vibration resistance	15 mm to 6 Hz; 2 g to 500 Hz
operating frequency maximum	1 1/s
type of coordination	1
according to IEC 60947-4-2	AC-53a: 12 A: (8-0,5: 72-32)
Net Weight	0.46 kg
direct start	Yes
reverse starting	Yes
product function short circuit protection	Yes
design of short-circuit protection	fuse
at 400 V rated value	55 kA
at 500 V rated value	55 kA
at 500 V according to UL 60947 rated value	100 kA
EMC emitted interference according to IEC 60947-1	class A
EMC immunity according to IEC 60947-1	Class A
due to burst according to IEC 61000-4-4	2 kV
due to conductor-earth surge according to IEC 61000-4-5	2 kV
due to conductor-conductor surge according to IEC	1 kV
due to high-frequency radiation according to IEC 61000	Class A
field-based interference according to IEC 61000-4-3	10 V/m
electrostatic discharge according to IEC 61000-4-2	8 kV air discharge
conducted HF interference emissions according to	Class A for industrial environment
touch protection against electrical shock	finger-safe
protection class IP on the front according to IEC 60529	IP20
touch protection on the front according to IEC 60529	finger-safe
number of poles for main current circuit	3
design of the switching contact	Hybrid
minimum load [%]	50 %; from smallest adjustable rated current
type of the motor protection	solid-state
operating voltage rated value	48 ... 500 V
relative symmetrical tolerance of the operating voltage	10 %
operating frequency 1 rated value	50 Hz
operating frequency 2 rated value	60 Hz
relative positive tolerance of the operating frequency	5%
relative negative tolerance of the operating frequency	5%
operational current at AC at 400 V rated value	12 A
ampacity when starting maximum	120 A
operating power for 3-phase motors at 400 V at 50 Hz	2.2 ... 5.5 kW
number of digital inputs	4
note	4 via 3DI/LC module
of the inputs	4 byte
of the outputs	2 byte
type of voltage of the supply voltage	DC
minimum permissible	20.4 V
maximum permissible	28.8 V
supply voltage at DC rated value	24 V
in standby mode of operation	85 mA
during operation	90 mA
at switching on of motor	180 mA
in switching state OFF with bypass circuit	2.2 W
in switching state ON with bypass circuit	4.32 W
inrush current peak at 24 V	25 A; Observe the manual for group configuration
duration of inrush current peak at 24 V	0.14 ms
ON-delay time	20 ms
OFF-delay time	35 ... 50 ms
at 40 °C rated value	12 A
at 50 °C rated value	10 A
at 55 °C rated value	9A
at 60 °C rated value	7A
mounting position	Vertical, horizontal (observe derating)
fastening method	pluggable in BaseUnit
height	142 mm
width	30 mm
depth	150 mm
upwards	50 mm
downwards	50 mm
during storage	-40 ... +70 °C
during transport	-40 ... +70 °C
60721	not get into the devices)
relative humidity during operation	10 ... 95 %
air pressure according to SN 31205	900 ... 1 060 hPa
product function bus communication	Yes
supports PROFIenergy measured values	Yes
supports PROFIenergy shutdown	Yes
1 for digital input signals	Pluggable module - accessory
for main energy infeed	Plug contact to Base Unit
for load-side outgoing feeder	Plug contact to Base Unit
for supply voltage line-side	Plug contact to Base Unit
wire length for motor unshielded maximum	200 m
at 110/120 V rated value	0.5 hp
at 230 V rated value	2 hp
at 200/208 V rated value	2 hp
at 220/230 V rated value	3 hp
at 460/480 V rated value	7.5 hp
other	Dangerous goods
Environment	Industrial Communication
last modified:	4/4/2026

⬇ Descargar datasheet (PDF)

Ficha técnica oficial del fabricante con todas las especificaciones.

Material con posibilidad de devolución

ET 200SP, arrancador inversor 4,0-12A HF

Save 14%

3RK1308-0BE00-0CP0

€557,17 EUR

~~€655,49 EUR~~

3RK1308-0BE00-0CP0

Plazo de entrega (días):

€557,17 EUR /each

Plazo de entrega (días):

€557,17 EUR /each

Total:

Total: €0,00 EUR

in cart Total: