ET 200PRO DSE ST
Siemens

ET 200PRO DSE ST

ET 200pro DSE ST Arrancador directo Standard con maniobra mecánica protección electrónica contra sobrecarga AC-3, 0,9 kW / 400 V 0,15 A...2,00 A Contacto de freno AC 400 V Han Q4/2 - Han Q8/0

  • Potencia (kW)0.9
  • ComunicaciónYes
Protección y seguridad
product function short circuit protectionYes
design of short-circuit protectionfuse
touch protection against electrical shockfinger-safe
type of the motor protectionsolid-state
Datos eléctricos
insulation voltage rated value400 V
surge voltage resistance rated value6 kV
maximum permissible voltage for protective separation between400 V
type of voltage of the supply voltage for brake controlAC
supply voltage for brake control required400 V
number of poles for main current circuit3
adjustable current response value current of the current0.15 ... 2 A
type of voltageAC
operating voltage rated value200 ... 400 V
operating range relative to the operating voltage at AC at 50 Hz200 ... 440 V
operating power for 3-phase motors at 400 V at 50 Hz70 ... 900 W
type of voltage of the supply voltageDC
supply voltage 1 at DC24 V
type of voltage of the control supply voltageDC
control supply voltage at DC rated value20.4 ... 28.8 V
control supply voltage 1 at DC rated value20.4 ... 28.8 V
control supply voltage 1 at DC24 V
for main current circuittab terminals
for supply voltage line-sidevia backplane bus
for supply voltage transmissionvia backplane bus
full-load current (FLA) for 3-phase AC motor at 480 V rated2A
operating voltage at AC at 60 Hz according to CSA and UL600 V
Entradas/Salidas y comunicación
PROFIBUS DP protocolYes
PROFINET protocolYes
PROFINET IO protocolYes
design of the interface PROFINET protocolYes
type of electrical connection of the communication interfacevia backplane bus
Condiciones ambientales
installation altitude at height above sea level maximum3 500 m
Prestaciones y durabilidad
B10 value with high demand rate according to SN 319201 000 000
Otras características
product brand nameSIMATIC
design of the productdirect starter
product type designationET 200pro
product function on-site operationYes
degree of pollution3
shock resistance15 g / 11 ms
vibration resistance2g
operating frequency maximum750 1/h
type of coordination1
Net Weight1.68 kg
direct startYes
product component motor brake outputYes
brake control with 400 V ACYes
failure rate [FIT] with low demand rate according to SN100 FIT
MTTFd205 a
design of the switching contactelectromechanical
operating frequency 1 rated value50 Hz
operating frequency 2 rated value60 Hz
relative positive tolerance of the operating frequency10 %
relative negative tolerance of the operating frequency15 %
number of digital inputs0
for digital output signals0
for digital input signals0
minimum permissible20.4 V
maximum permissible28.8 V
when switching on250 mA
without bypass circuit1.6416 W
mounting positionvertical, horizontal
fastening methodscrew fixing
height230 mm
width110 mm
depth150 mm
relative humidity during operation5 ... 95 %
product function bus communicationYes
supports PROFIenergy measured valuesYes
supports PROFIenergy shutdownYes
1 for digital input signalsM12 socket
2 for digital input signalsM12 socket
3 for digital input signalsM12 socket
4 for digital input signalsM12 socket
for main energy infeedsocket according to ISO23570
for load-side outgoing feedersocket according to ISO23570
for main energy transmissionsocket according to ISO23570
ates/Test Reportfirmations
110150
last modified:7/13/2026

Ficha técnica oficial del fabricante con todas las especificaciones.

Producto bajo pedido

Puedes pedirlo ya: te lo servimos en el plazo indicado. Selecciona la cantidad para añadirlo al carrito.

Plazo de entrega (días):
Avísame cuando haya stock

Si prefieres esperar a que vuelva a haber envío inmediato, déjanos tu email.

Solo usaremos tu email para avisarte de este artículo.

Avísame cuando esté disponible

ET 200PRO DSE ST
€762,83 EUR
3RK1304-5KS40-4AA3
Plazo de entrega (días):
€762,83 EUR /each
Total:

Accesorios