€105,90 EUR
+ VAT
Especificaciones técnicas
Protección y seguridad
| fuse protection type at input | 5 A per output (not accessible) |
|---|---|
| operating resource protection class | Class III |
| protection class IP | IP20 |
Datos eléctricos
| type of the power supply network | Controlled DC voltage |
|---|---|
| supply voltage at DC rated value | 24 V |
| input voltage at DC | 22 ... 30 V |
| overvoltage overload capability | 35 V |
| input current at rated input voltage 24 V rated value | 12 A |
| voltage curve at output | controlled DC voltage |
| formula for output voltage | Vin - approx. 0.2 V |
| relative overall tolerance of the voltage note | In accordance with the supplying input voltage |
| output current up to 60 °C per output rated value | 3A |
| adjustable current response value current of the current | 0.5 ... 3 A |
| efficiency in percent | 97 % |
| power loss [W] at rated output voltage for rated value of the | 9W |
| residual current at switch-off typical | 1 mA |
Prestaciones y durabilidad
| response delay maximum | 5s |
|---|---|
| MTBF at 40 °C | 755 915 h |
Certificados y homologaciones
| CE marking | Yes |
|---|---|
| UL approval | Yes; UL-Recognized (UL 2367) File E328600; cULus-Listed (UL 508, CSA |
| UKCA marking | Yes |
| EAC approval | Yes |
| CB-certificate | Yes |
| shipbuilding approval | Yes |
| American Bureau of Shipping Europe Ltd. (ABS) | Yes |
| Det Norske Veritas (DNV) | Yes |
Otras características
| number of outputs | 4 |
|---|---|
| type of response value setting | via potentiometer |
| design of the reset device/resetting mechanism | via sensor per output |
| remote reset function | non-isolated 24 V input (signal level "high" at > 15 V) |
| standard for safety | according to EN 62368-1 |
| for emitted interference | EN 55022 Class B |
| for interference immunity | EN 61000-6-2 |
| type of electrical connection | screw terminal |
| for auxiliary contacts | Remote reset: 1 screw terminal for 0.5 ... 4 mm² |
| for signaling contact | 1 screw terminal for 0.5 ... 4 mm² |
| width × height × depth of the enclosure | 72 × 80 × 72 mm |
| installation width × mounting height | 72 mm × 180 mm |
| top | 50 mm |
| bottom | 50 mm |
| left | 0 mm |
| right | 0 mm |
| fastening method | Snaps onto DIN rail EN 60715 35x7.5/15 |
| DIN-rail mounting | Yes |
| housing can be lined up | Yes |
| net weight | 0.2 kg |
| mechanical accessories | Device identification label 20 mm × 7 mm, TI-grey 3RT2900-1SB20 |
| identification link | Yes; acc. to IEC 61406-1:2022 |
| last modified: | 6/28/2026 |
Accesorios
-