SITOP PSU6200/1AC/DC48V/5A
Siemens

SITOP PSU6200/1AC/DC48V/5A

SITOP PSU6200 48 V/5 A fuente de alimentación estabilizada entrada: 120-240 V AC (110-240 V DC) salida: 48 V DC/5 A con interfaz de diagnóstico

Medición y rango
relative control precision of the output voltage at load step of1%
Otras características
type of the power supply network1-phase AC or DC
minimum rated value120 V
maximum rated value240 V
initial value85 V
full-scale value264 V
supply voltage at DC110 ... 240 V
input voltage at DC85 ... 275 V
wide range inputYes
overvoltage overload capability300 V AC for 30 s
operating condition of the mains bufferingat Vin = 240 V
line frequency50/60 Hz
at rated input voltage 120 V2.2 A
at rated input voltage 240 V1.2 A
current limitation of inrush current at 25 °C maximum6A
fuse protection type5A
fuse protection type in the feederCircuit breaker from 4 A characteristic C/6 A characteristic B to 10 A
voltage curve at outputControlled, isolated DC voltage
number of outputs1
output voltage at DC rated value48 V
at output 1 at DC rated value48 V
output voltage adjustableYes; via potentiometer
adjustable output voltage48 ... 56 V; max. 240 W (288 W up to 45°C)
relative overall tolerance of the voltage3%
on slow fluctuation of input voltage0.1 %
on slow fluctuation of ohm loading0.1 %
maximum50 mV
typical30 mV
display version for normal operationGreen LED for 48 V OK
behavior of the output voltage when switching onOvershoot of Vout < 2 %
response delay maximum0.5 s
rated value5A
rated range0 ... 5 A; 6 A up to +45°C; +60 ... +70 °C: Derating 3%/K
supplied active power typical240 W
on short-circuiting during the start-up typical6A
at short-circuit during operation typical6A
parallel switching of outputscan be set with DIP switch
bridging of equipmentYes; switchable characteristic
efficiency in percent93.9 %
at rated output voltage for rated value of the output15 W
during no-load operation maximum2.4 W
load step 10 to 90% typical4 ms
load step 90 to 10% typical4 ms
design of the overvoltage protection< 60 V
property of the output short-circuit proofYes
design of short-circuit protectionShutdown and periodic restart attempts
in normal operationoverload capability 150 % Iout rated up to 5 s/min
galvanic isolation between input and outputYes
galvanic isolationOutput voltage: SELV, ES1 (IEC 62368-1), DVC As (IEC 61204-7)
operating resource protection classClass I
protection class IPIP20
for emitted interferenceEN 55022 Class B
for mains harmonics limitationEN 61000-3-2
for interference immunityEN 61000-6-2
CE markingYes
UL approvalYes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259
UKCA markingYes
EAC approvalYes
Regulatory Compliance Mark (RCM)Yes
SEMI F47Yes
BISYes; R-41188271
CB-certificateYes
shipbuilding approvalYes
American Bureau of Shipping Europe Ltd. (ABS)Yes
Det Norske Veritas (DNV)Yes
total403.1 kg
during manufacturing23.1 kg
during operation379.5 kg
during transport-40 ... +85 °C
during storage-40 ... +85 °C
type of electrical connectionpush-in terminals
at output+1, +2, -1, -2, -3: push-in for 0.5 ... 2.5 mm²
for auxiliary contacts13, 14 (alarm signal): 1 push-in terminal each for 0.2 ... 1.5 mm²
width × height × depth of the enclosure45 × 135 × 125 mm
installation width × mounting height45 mm × 225 mm
top45 mm
bottom45 mm
left0 mm
right0 mm
fastening methodSnaps onto DIN rail EN 60715 35x7.5/15
DIN-rail mountingYes
housing can be lined upYes
net weight0.9 kg
electrical accessoriesBuffer module, redundancy module
mechanical accessoriesIdentification labels SIMATIC ET 200SP 6ES7193-6LF30-0AW0
identification linkYes; acc. to IEC 61406-1:2022
IDEA4
UNSPSC15
last modified:5/5/2026
⬇ Descargar datasheet (PDF)

Ficha técnica oficial del fabricante con todas las especificaciones.

Material con posibilidad de devolución
SITOP PSU6200/1AC/DC48V/5A
€209,92 EUR
€299,88 EUR
6EP3344-7SB00-3AX0
Plazo de entrega (días):
€209,92 EUR /each
Total:

Accesorios