SITOP PSU4200/1AC/DC24V/20A

Name: SITOP PSU4200/1AC/DC24V/20A
Brand: Siemens S.A
SKU: 6EP3336-3SB00-0AX0
Price: 162.01 EUR
Availability: InStock

DescripciónEspecificacionesDescargasGarantías

SITOP PSU4200 1AC 24 V/20 A fuente de alimentación estabilizada PSU4200 entrada: 120/240 V AC salida: 24 V DC/20 A

Medición y rango

relative control precision of the output voltage with rapid	0.2 %
relative control precision of the output voltage load step of	2%
relative control precision of the output voltage at load step of	3%

Prestaciones y durabilidad

MTBF at 40 °C	1 065 000 h

Otras características

type of the power supply network	1-phase AC
minimum rated value	120 V
maximum rated value	240 V
initial value	85 V
full-scale value	264 V
wide range input	Yes
operating condition of the mains buffering	at Vin = 120/240 V
line frequency	50/60 Hz
at rated input voltage 100 V	5.4 A
at rated input voltage 120 V	4.5 A
at rated input voltage 200 V	2.6 A
at rated input voltage 230 V	2.4 A
at rated input voltage 240 V	2.3 A
current limitation of inrush current at 25 °C maximum	20 A
typical	40 ms
I2t value maximum	3 A²·s
fuse protection type	6.3 A
voltage curve at output	Controlled, isolated DC voltage
output voltage at DC rated value	24 V
at output 1 at DC rated value	24 V
output voltage adjustable	Yes; via potentiometer
adjustable output voltage	24 ... 28 V
relative overall tolerance of the voltage	3%
on slow fluctuation of input voltage	0.1 %
on slow fluctuation of ohm loading	1%
maximum	150 mV
display version for normal operation	Green LED for 24 V OK
type of signal at output	Signal contact (signal load capacity: 10 mA) for DC OK
behavior of the output voltage when switching on	No overshoot of Vout (soft start)
response delay maximum	1.5 s
rated value	20 A
rated range	0 ... 20 A; +60 ... +70 °C: Derating 3%/K
supplied active power typical	480 W
bridging of equipment	Yes
efficiency in percent	93 %
at rated output voltage for rated value of the output	37 W
during no-load operation maximum	3W
load step 10 to 90% typical	1 ms
load step 90 to 10% typical	1 ms
design of the overvoltage protection	< 32 V
property of the output short-circuit proof	Yes
design of short-circuit protection	Shutdown and periodic restart attempts
galvanic isolation between input and output	Yes
galvanic isolation	Output voltage: SELV, ES1 (IEC 62368-1), DVC As (IEC 61204-7)
operating resource protection class	Class I
protection class IP	IP20
for emitted interference	EN 55032 Class A
for mains harmonics limitation	EN 61000-3-2
for interference immunity	EN 61000-6-2
CE marking	Yes
UL approval	Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259
UKCA marking	Yes
EAC approval	Yes
Regulatory Compliance Mark (RCM)	Yes
BIS	Yes; in preparation
CB-certificate	Yes
total	1 078.9 kg
during manufacturing	47.4 kg
during operation	1 029.9 kg
during transport	-40 ... +85 °C
during storage	-40 ... +85 °C
type of electrical connection	push-in terminals
at input	L, N, PE: push-in for 0.5 ... 4 mm²
at output	+, -: push-in for 0.5 ... 6 mm²
for signaling contact	13, 14: push-in for 0.2 ... 1.5 mm²
width × height × depth of the enclosure	70 × 135 × 125 mm
installation width × mounting height	70 mm × 225 mm
top	45 mm
bottom	45 mm
left	0 mm
right	0 mm
fastening method	Snaps onto DIN rail EN 60715 35x7.5/15
DIN-rail mounting	Yes
housing can be lined up	Yes
net weight	0.93 kg
IDEA	4
UNSPSC	15
last modified:	6/28/2026

⬇ Descargar datasheet (PDF)

Ficha técnica oficial del fabricante con todas las especificaciones.

Material con posibilidad de devolución

SITOP PSU4200/1AC/DC24V/20A

Save 29%

6EP3336-3SB00-0AX0

€162,01 EUR

~~€231,44 EUR~~

6EP3336-3SB00-0AX0

Plazo de entrega (días):

€162,01 EUR /each

Plazo de entrega (días):

€162,01 EUR /each

Total:

Total: €0,00 EUR

in cart Total: