SIPLUS ET 200SP CPU1515SP PC2
Siemens

SIPLUS ET 200SP CPU1515SP PC2

Producto descatalogado No disponible para compra · sin producto de reemplazo.
SIPLUS ET 200SP CPU 1515SP PC2 basado en 6ES7677-2DB42-0GB0 con revestimiento conformado, -40…+60 °C, 8 GB de RAM, CFast de 128 GB, con Windows 10 IoT Enterprise 64 bits y controlador por software S7-1500 CPU 1505SP preinstalada, interfaces: 1 Slot CFast, 1 Slot SD/MMC, 1 conexión para ET 200SP BusAdapter PROFINET, 1 Ethernet de 10/100/1000 Mbits/s 2 USB 3.0, 2 USB 2.0, 1 DisplayPort, documentación en memoria USB, memoria USB de restauración

  • Comunicación1
Entradas/Salidas y comunicación
via PC interfaces1
on Ethernet via NTPYes
Number of industrial Ethernet interfaces2
Number of PROFINET interfaces1
Number of PROFIBUS interfaces1; Via CM DP module
Number of RS 485 interfaces1; Via CM DP module
Number of USB interfaces4; 2x USB 2.0, 2x USB 3.0 on front side
Graphics interface1x DisplayPort
Interface typePROFINET
RJ 45 (Ethernet)Yes; Via BusAdapter BA 2x RJ45
Industrial Ethernet status LEDYes
PROFINET IO ControllerYes
PROFINET IO deviceYes
PROFIBUS DP masterYes
PROFIBUS DP deviceYes
OPC UA ClientYes; From SW CPU 1505SP V2.6
OPC UA ServerYes; Data access (read, write, subscribe), runtime license required
MODBUSYes; MODBUS TCP
Condiciones ambientales
Installation altitude above sea level, max.2 000 m
Ambient air temperature-barometric pressure-altitudeTmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m)
Otras características
Product type designationCPU 1515SP PC2
based on6ES7677-2DB42-0GB0
STEP 7 TIA Portal configurable/integrated from versionsee entry ID: 109746275
ControlS7-1500 Software Controller CPU 1505SP
via datasetYes
Mode selector switch1
Rated value (DC)24 V
permissible range, lower limit (DC)19.2 V
permissible range, upper limit (DC)28.8 V
Reverse polarity protectionYes
Mains/voltage failure stored energy time5 ms
Current consumption (rated value)1.8 A; Full processor load, incl. ET 200SP modules and using USB
Current consumption (in no-load operation), typ.0.5 A
Current consumption, max.2.9 A
I²t0.426 A²·s; with starting current inrush
Active power input, max.43 W; incl. ET 200SP modules and using USB
Infeed power to the backplane bus8.75 W
Power loss, typ.16 W
Processor typeIntel Atom E3940, 1.6 GHz, 4 cores
Type of memoryDDR3L
Main memory8 GB RAM
CFast memory cardYes; 30 GB flash memory
integrated (for program)1 Mbyte
integrated (for data)5 Mbyte
integrated (for CPU function library of CPU Runtime)20 Mbyte
integrated (on PC mass storage)320 Mbyte
with UPSYes; all memory areas declared retentive
with non-volatile memoryYes
for bit operations, typ.10 ns
for word operations, typ.12 ns
for fixed point arithmetic, typ.16 ns
for floating point arithmetic, typ.64 ns
Number of elements (total)6 000; In addition to blocks such as DBs, FBs and FCs, UDTs, global
Number, max.5 999; Number range: 1 to 65535
Size, max.5 Mbyte
Number of free cycle OBs100
Number of time alarm OBs20
Number of delay alarm OBs20
Number of cyclic interrupt OBs20
Number of process alarm OBs50
Number of DPV1 alarm OBs3
Number of isochronous mode OBs1
Number of technology synchronous alarm OBs2
Number of startup OBs100
Number of asynchronous error OBs4
Number of synchronous error OBs2
Number of diagnostic alarm OBs1
per priority class24
Number2 048
can be setYes
adjustableYes
Number of clock memories8; 8 clock memory bit, grouped into one clock memory byte
Retentivity adjustableYes
per priority class, max.64 kbyte; max. 16 KB per block
Number of IO modules8 192
Inputs32 kbyte; All inputs are in the process image
Outputs32 kbyte; All outputs are in the process image
Number of subprocess images, max.32
Integrated power supplyYes
Number of distributed IO systems20
Via CM1
Modules per rack, max.64; CPU 1515SP PC + 64 modules + server module
Number of lines, max.1
TypeHardware clock
Hardware clock (real-time)Yes; Resolution: 1 s
Backup time6 wk; At 40 °C ambient temperature, typically
Deviation per day, max.10 s; Typ.: 2 s
supportedYes
to DP, masterYes
on Windows clock, deviceYes
Number of SD card slots1
automatic detection of transmission rateYes
AutonegotiationYes
AutocrossingYes
Number of connections88
Transmission rate, max.100 Mbit/s
Number of ports2
integrated switchYes
SIMATIC communicationYes
Open IE communicationYes
Web serverYes
Isochronous modeYes
shortest clock pulse500 µs
IRTYes
PROFIenergyYes
Number of connectable IO Devices, max.128
Of which IO devices with IRT, max.64
of which in line, max.64
Number of connectable IO Devices for RT, max.128
Number of IO Devices that can be simultaneously8
IO Devices changing during operation (partnerYes
Number of IO Devices per tool, max.8
for send cycle of 500 µs500 µs to 8 ms
for send cycle of 1 ms1 ms to 16 ms
for send cycle of 2 ms2 ms to 32 ms
for send cycle of 4 ms4 ms to 64 ms
Inputs, max.8 kbyte
Outputs, max.8 kbyte
Prioritized startupYes
Shared deviceYes
Number of IO Controllers with shared device, max.4
Asset management recordYes
RS 485Yes
max. number of DP devices125
Number of connections, max.88
Number of connections reserved for ES/HMI/web10
Number of S7 routing paths16
MRPYes
MRPDYes
Switchover time on line break, typ.200 ms
Number of stations in the ring, max.50
PG/OP communicationYes
S7 routingYes
S7 communication, as serverYes
S7 communication, as clientYes
User data per job, max.64 kbyte; BSEND/BRCV: 64 KB; PUT/GET: 960 bytes
TCP/IPYes
Data length, max.64 kbyte
ISO-on-TCP (RFC1006)Yes
UDPYes
SNMPYes
DCPYes
LLDPYes
HTTPYes; Via Windows and PROFINET interface
HTTPSYes; Via Windows and PROFINET interface
Runtime license requiredYes; "Small" license required
Application authenticationYes; Available security policies: None, Basic128Rsa15, Basic256Rsa15,
Security policiesYes; Available security policies: None, Basic128Rsa15, Basic256Rsa15,
User authenticationYes; "anonymous" or by user name & password
Number of login stations for message functions, max.32
Program alarmsYes
Number of configurable program messages, max.10 000
Number of simultaneously active program alarms1 000
Number of program alarms1 000
Number of alarms for system diagnostics200
Number of alarms for motion technology objects160
Joint commission (Team Engineering)Yes; Parallel online access possible for up to 8 engineering systems
Status blockYes; up to 8 simultaneously
Number of breakpoints8
Status/control variableYes
VariablesInputs, outputs, memory bits, DB, times, counters
of which status variables, max.200
of which control variables, max.200
ForcingYes
Forcing, variablesInputs, outputs
Number of variables, max.200
presentYes
Number of entries, max.1 000
of which powerfail-proof300
Number of configurable Traces4
Memory size per trace, max.512 kbyte
RUN/STOP LEDYes
ERROR LEDYes
MAINT LEDYes
Motion ControlYes
Number of available Motion Control resources for2 400
per speed-controlled axis40; per axis
per positioning axis80; per axis
per synchronous axis160; per axis
per external encoder80; per external encoder
per output cam20; per cam
per cam track160; per cam track
per probe40; per probe
Number of positioning axes at motion control cycle15
PID_CompactYes; Universal PID controller with integrated optimization
PID_3StepYes; PID controller with integrated optimization for valves
PID-TempYes; PID controller with integrated optimization for temperature
High-speed counterYes
min.-40 °C; = Tmin
max.up to 55 °C with max. 64 ET 200SP modules, max. 2x 900 mA USB load and
horizontal installation, min.-40 °C; = Tmin (incl. condensation/frost)
horizontal installation, max.70 °C; = Tmax
vertical installation, min.-40 °C; = Tmin
vertical installation, max.50 °C; = Tmax; with max. 32 ET 200SP modules and max. 4x 500 mA USB
2-38, max.horizontal installation
Operation, tested according to IEC 60068-2-6Yes
Transport, tested acc. to IEC 60068-2-6Yes
tested according to IEC 60068-2-6Yes
tested according to IEC 60068-2-27Yes
tested according to IEC 60068-2-29Yes
Storage/transport, tested acc. to IEC 60068-2-27Yes
Resistant to commercially available coolants andYes; Incl. diesel and oil droplets in the air
60721-3-3Class 3B3 on request
to EN 60721-3-30AA0)
60721-3-6degree 3); *
to EN 60721-3-60AA0)
conditions acc. to EN 60721, EN 60654-4 andduring operation!
Protection against fouling acc. to EN 60664-3Yes; Type 1 protection
Military testing according to MIL-I-46058C, Amendment 7Yes; Discoloration of coating possible during service life
Qualification and Performance of Electrical InsulatingYes; Conformal coating, Class A
pre-installed operating systemWindows 10 IoT Enterprise 2016 LTSB, 64bit, MUI
LADYes
FBDYes
STLYes
SCLYes
GRAPHYes
User program protection/password protectionYes
Copy protectionYes
Block protectionYes
Protection level: Write protectionYes
Protection level: Read/write protectionYes
Protection level: Complete protectionYes
lower limitadjustable minimum cycle time
upper limitadjustable maximum cycle time
Size of ODK SO file, max.5.8 Mbyte
SD cardOptionally for additional mass storage
Width160 mm
Height117 mm
Depth75 mm
Weight, approx.0.83 kg
IDEA4
UNSPSC15
last modified:12/8/2024

Ficha técnica oficial del fabricante con todas las especificaciones.

Producto bajo pedido

Puedes pedirlo ya: te lo servimos en el plazo indicado. Selecciona la cantidad para añadirlo al carrito. Si prefieres esperar a que vuelva a haber stock inmediato, déjanos tu email abajo.

Plazo de entrega (días):

Este artículo va bajo pedido.

Avísame cuando esté disponible

Solo usaremos tu email para avisarte de este artículo.

Accesorios